Hi All, I am trying to get following setup working,
https://www.intel.com/content/www/us/en/developer/articles/guide/get-started-with-ipsec-acceleration-in-the-fdio-vpp-project.html The commands in above setup are as follows, ================================================================= set int ip address TenGigabitEthernet6/0/0 192.168.30.30/24 set int promiscuous on TenGigabitEthernet6/0/0 set int ip address TenGigabitEthernet6/0/1 192.168.30.31/24 set int promiscuous on TenGigabitEthernet6/0/1 ipsec spd add 1 set interface ipsec spd TenGigabitEthernet6/0/1 1 ipsec sa add 10 spi 1000 esp tunnel-src 192.168.1.1 tunnel-dst 192.168.1.2 crypto-key 4339314b55523947594d6d3547666b45 crypto-alg aes-cbc-128 integ-key 4339314b55523947594d6d3547666b45 integ-alg sha1-96 ipsec policy add spd 1 outbound priority 100 action protect sa 10 local-ip-range 192.168.20.0-192.168.20.255 remote-ip-range 192.168.40.0-192.168.40.255 ipsec policy add spd 1 outbound priority 90 protocol 50 action bypass ip route add 192.168.40.40/32 via 192.168.1.2 TenGigabitEthernet6/0/1 set ip arp TenGigabitEthernet6/0/1 192.168.1.2 90:e2:ba:50:8f:19 set int state TenGigabitEthernet6/0/0 up set int state TenGigabitEthernet6/0/1 up ================================================================= However, a few commands in the setup are failing. e.g. DBGvpp# ipsec sa add 10 spi 1000 esp tunnel-src 192.168.1.1 tunnel-dst 192.168.1.2 crypto-key 4339314b55523947594d6d3547666b45 crypto-alg aes-cbc-128 integ-key 4339314b55523947594d6d3547666b45 integ-alg sha1-96 ipsec sa: parse error: '-src 192.168.1.1 tunnel-dst 19...' Can anybody guide me on how to go about this? -- Thanks and Regards, Hrishikesh Karanjikar
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#20641): https://lists.fd.io/g/vpp-dev/message/20641 Mute This Topic: https://lists.fd.io/mt/87764016/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
