Hi everyone, I am new to VPP so I apologize if I'm not in the right group to post this topic.
I am interested in the "udp encap" command but I see no documentation about it. Anyone could explain me how we use it and how it is suposed to work ? Currently I have the following network architecture : *[Linux machine]* (192.168.11.1/24) <===========> (192.168.11.2/24) *[VPP machine with DPDK enabled]* I added an "udp-encap" entry : vpp# show udp encap 0 udp-encap:[0]: ip-fib-index:0 ip:[src:192.168.11.2, dst:192.168.11.1] udp:[src:23001, dst:23000] to:[0:0]] locks:1 Stacked on: [@0]: dpo-load-balance: [proto:ip4 index:13 buckets:1 uRPF:12 to:[25:2400] via:[21:1884]] [0] [@5]: ipv4 via 192.168.11.1 GigabitEthernet0/4/0: mtu:9000 next:3 flags:[] fa163efcca8bfa163ed0c2080800 How can I encapsulate traffic accorfing to this udp-encap entry ? Thanks in advance ! David
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#20535): https://lists.fd.io/g/vpp-dev/message/20535 Mute This Topic: https://lists.fd.io/mt/87278420/21656 Mute #vppctl:https://lists.fd.io/g/vpp-dev/mutehashtag/vppctl Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
