Hi All,

I am not getting reply for punt socket register for the following code


*C-Code*
volatile int sigterm_received = 0;
volatile u32 result_ready;
volatile u16 result_msg_id;

/* M_NOALLOC: construct, but don't yet send a message */

#define M_NOALLOC(T,t)                          \
        do {                                          \
                result_ready = 0;                           \
                clib_memset (mp, 0, sizeof (*mp));          \
                mp->_vl_msg_id = ntohs (VL_API_##T);        \
                mp->client_index = am->my_client_index;     \
        } while(0);

void
wrap_vac_callback (unsigned char *data, int len)
{
        result_ready = 1;
        result_msg_id = ntohs(*((u16 *)data));
    vl_api_punt_socket_register_reply_t *rmp =
(vl_api_punt_socket_register_reply_t *)data;
    printf(" vpp punt socket path \n", rmp->pathname);
    printf("message id : %d\n", result_msg_id);
}

        static void
test_connect ()
{
        static int i;
        int rv = vac_connect("vac_client", NULL, wrap_vac_callback, 32 /*
rx queue-length*/);
        if (rv != 0) {
                printf("Connect failed: %d\n", rv);
                exit(rv);
        }
        printf(".");
        vac_disconnect();
        i++;
}


static void test_messages (void)
{
        api_main_t * am = vlibapi_get_main();
        vl_api_show_version_t message;
        vl_api_show_version_t *mp;
        int async = 1;

        int rv = vac_connect("vac_client", NULL, wrap_vac_callback, 32 /*
rx queue-length*/);
        if (rv != 0) {
                printf("Connect failed: %d\n", rv);
                exit(rv);
        }


        printf("Connected to vpp...: %d\n", rv);
        double timestamp_start = unix_time_now_nsec() * 1e-6;



        /*
         * Test vpe_api_write and vpe_api_read to send and recv message for
an
         * API
         */
        int i;
        long int no_msgs = 10;
        mp = &message;

        for (i = 0; i < no_msgs; i++) {
                /* Construct the API message */
                M_NOALLOC(SHOW_VERSION, show_version);
                printf(" writing show version message: \n");
                vac_write((char *)mp, sizeof(*mp));
#ifndef __COVERITY__
                /* As given, async is always 1. Shut up Coverity about it */
                if (!async)
                        while (result_ready == 0);
#endif
        }
        if (async) {
                vl_api_control_ping_t control;
                vl_api_control_ping_t *mp;
                mp = &control;
                M_NOALLOC(CONTROL_PING, control_ping);
                printf(" writing control ping message...: \n");
                vac_write((char *)mp, sizeof(*mp));

                while (result_msg_id != VL_API_CONTROL_PING_REPLY);
        }

        double timestamp_end = unix_time_now_nsec() * 1e-6;
        printf("\nTook %.2f msec, %.0f msgs/msec \n", (timestamp_end -
timestamp_start),
                        no_msgs/(timestamp_end - timestamp_start));
        printf("Exiting...\n");
        vac_disconnect();
}

#define READ_PATH "/tmp/strongswan-uds-socket"
#define PUNT_SOCKET_REGISTER_REPLY "punt_socket_register_reply"

static void test_punt_socket_register_message(void)
{
    api_main_t * am = vlibapi_get_main();
    vl_api_punt_socket_register_t *mp;
    char *read_buffer;
    int msg_length;
        char *read_path = READ_PATH;
        int async = 1;

        int rv = vac_connect("vac_client", NULL, wrap_vac_callback, 32 /*
rx queue-length*/);
        if (rv != 0) {
                printf("Connect failed: %d\n", rv);
                exit(rv);
        }

        printf("Connected to vpp...: %d\n", rv);
        double timestamp_start = unix_time_now_nsec() * 1e-6;

        if (async) {
                mp = vl_msg_api_alloc(sizeof(*mp));
                memset(mp, 0, sizeof(*mp));
                mp->_vl_msg_id = ntohs(VL_API_PUNT_SOCKET_REGISTER);
                printf(" message id VL_API_PUNT_SOCKET_REGISTER
%d",VL_API_PUNT_SOCKET_REGISTER);
                printf(" message id VL_API_PUNT_SOCKET_REGISTER
%d",VL_API_PUNT_SOCKET_REGISTER_REPLY);
                mp->header_version = ntohl(1);
                mp->punt.type = PUNT_API_TYPE_L4;
                mp->punt.punt.l4.af = ADDRESS_IP4;
                mp->punt.punt.l4.protocol = IPPROTO_UDP;
                mp->punt.punt.l4.port = ntohs(4500);
                mp->client_index = am->my_client_index;
                strncpy(mp->pathname, read_path, 107);
                printf(" writing punt socket register...: \n");
                vac_write((char *)mp, sizeof(*mp));

                while (result_msg_id != VL_API_PUNT_SOCKET_REGISTER_REPLY);
        }
        printf(" message id VL_API_PUNT_SOCKET_REGISTER
%d",VL_API_CONTROL_PING_REPLY);
        if (async) {
                vl_api_control_ping_t control;
                vl_api_control_ping_t *mp;
                mp = &control;
                M_NOALLOC(CONTROL_PING, control_ping);
                printf(" writing control ping message...: \n");
                vac_write((char *)mp, sizeof(*mp));

                while (result_msg_id != VL_API_CONTROL_PING_REPLY);
        }

        double timestamp_end = unix_time_now_nsec() * 1e-6;
        printf("\nTook %.2f msec, %.0f msgs/msec \n", (timestamp_end -
timestamp_start),
                        1/(timestamp_end - timestamp_start));
        printf("Exiting...\n");
        vac_disconnect();
}

int main (int argc, char ** argv)
{
        clib_mem_init (0, 3ULL << 30);
#if 0
        test_stats();
#endif

        int i;
/*
        for (i = 0; i < 10; i++) {
                test_connect();
        }
*/

/*        test_messages();*/
        test_punt_socket_register_message();
        exit (0);
}

*Compilation Options used*

gcc vpp_api_client_vac_layer.c -o vpp_api_client_vac_layer.o -lpthread
-lvlibmemoryclient -lvppinfra -lvppapiclient -I/usr/include/

*Output*
[root@8f57181df3a1 vpp_c_api_examples]# ./vpp_api_client_vac_layer.o
Connected to vpp...: 0
 message id VL_API_PUNT_SOCKET_REGISTER 538 message id
VL_API_PUNT_SOCKET_REGISTER 539 writing punt socket register...:

It is stuck, can you please suggest how to debug this ?

Thanks,
Regards,
Venu




On Fri, 1 Oct 2021 at 14:12, Venumadhav Josyula via lists.fd.io <vjosyula=
gmail....@lists.fd.io> wrote:

> Thanks, my mistake, it worked...
>
> On Fri, 1 Oct 2021 at 13:34, Stanislav Zaikin <zsta...@gmail.com> wrote:
>
>> You need to uncomment clib_mem_init
>>
>> On Fri, 1 Oct 2021 at 10:01, Venumadhav Josyula <vjosy...@gmail.com>
>> wrote:
>>
>>> Hi Ole,
>>>
>>> So instead of the code below, I tried the code from
>>> "src/vpp-api/client/test.c". I directly copied this into my .c file. And
>>> following commands i used
>>>
>>> compilation + linking : - gcc vpp_api_client_vac_layer.c -o
>>> vpp_api_client_vac_layer.o -lpthread -lvlibmemoryclient -lvppinfra
>>> -lvppapiclient -I/usr/include/
>>> code is below
>>> #include<stdio.h>
>>> #include<stdlib.h>
>>> #include <vnet/vnet.h>
>>> #include <vlib/vlib.h>
>>> #include <vlib/unix/unix.h>
>>> #include <vlibapi/api.h>
>>> #include <vppinfra/time.h>
>>> #include <vpp/api/vpe_msg_enum.h>
>>> #include <signal.h>
>>>
>>> #include<vpp-api/client/vppapiclient.h>
>>> #include<vpp-api/client/stat_client.h>
>>>
>>> #define vl_typedefs             /* define message structures */
>>> #include <vpp/api/vpe_all_api_h.h>
>>> #undef vl_typedefs
>>>
>>>
>>> volatile int sigterm_received = 0;
>>> volatile u32 result_ready;
>>> volatile u16 result_msg_id;
>>>
>>> /* M_NOALLOC: construct, but don't yet send a message */
>>>
>>> #define M_NOALLOC(T,t)                          \
>>>         do {                                          \
>>>                 result_ready = 0;                           \
>>>                 clib_memset (mp, 0, sizeof (*mp));          \
>>>                 mp->_vl_msg_id = ntohs (VL_API_##T);        \
>>>                 mp->client_index = am->my_client_index;     \
>>>         } while(0);
>>>
>>> void
>>> wrap_vac_callback (unsigned char *data, int len)
>>> {
>>>         result_ready = 1;
>>>         result_msg_id = ntohs(*((u16 *)data));
>>> }
>>>
>>>         static void
>>> test_connect ()
>>> {
>>>         static int i;
>>>         int rv = vac_connect("vac_client", NULL, wrap_vac_callback, 32
>>> /* rx queue-length*/);
>>>         if (rv != 0) {
>>>                 printf("Connect failed: %d\n", rv);
>>>                 exit(rv);
>>>         }
>>>         printf(".");
>>>         vac_disconnect();
>>>         i++;
>>> }
>>>
>>> static void test_messages (void)
>>> {
>>>         api_main_t * am = vlibapi_get_main();
>>>         vl_api_show_version_t message;
>>>         vl_api_show_version_t *mp;
>>>         int async = 1;
>>>
>>>         int rv = vac_connect("vac_client", NULL, wrap_vac_callback, 32
>>> /* rx queue-length*/);
>>>         if (rv != 0) {
>>>                 printf("Connect failed: %d\n", rv);
>>>                 exit(rv);
>>>         }
>>>
>>>         double timestamp_start = unix_time_now_nsec() * 1e-6;
>>>
>>>         /*
>>>          * Test vpe_api_write and vpe_api_read to send and recv message
>>> for an
>>>          * API
>>>          */
>>>         int i;
>>>         long int no_msgs = 10000;
>>>         mp = &message;
>>>
>>>         for (i = 0; i < no_msgs; i++) {
>>>                 /* Construct the API message */
>>>                 M_NOALLOC(SHOW_VERSION, show_version);
>>>                 vac_write((char *)mp, sizeof(*mp));
>>> #ifndef __COVERITY__
>>>                 /* As given, async is always 1. Shut up Coverity about
>>> it */
>>>                 if (!async)
>>>                         while (result_ready == 0);
>>> #endif
>>>         }
>>>         if (async) {
>>>                 vl_api_control_ping_t control;
>>>                 vl_api_control_ping_t *mp;
>>>                 mp = &control;
>>>                 M_NOALLOC(CONTROL_PING, control_ping);
>>>                 vac_write((char *)mp, sizeof(*mp));
>>>
>>>                 while (result_msg_id != VL_API_CONTROL_PING_REPLY);
>>>         }
>>>
>>>         double timestamp_end = unix_time_now_nsec() * 1e-6;
>>>         printf("\nTook %.2f msec, %.0f msgs/msec \n", (timestamp_end -
>>> timestamp_start),
>>>                         no_msgs/(timestamp_end - timestamp_start));
>>>         printf("Exiting...\n");
>>>         vac_disconnect();
>>> }
>>>
>>>
>>> int main (int argc, char ** argv)
>>> {
>>> #if 0
>>>         clib_mem_init (0, 3ULL << 30);
>>>         test_stats();
>>> #endif
>>>
>>>         int i;
>>>
>>>         for (i = 0; i < 1000; i++) {
>>>                 test_connect();
>>>         }
>>>
>>>         test_messages();
>>>         exit (0);
>>> }
>>>
>>> It compiled successfully, i got following assert for heap
>>> [root@8f57181df3a1 vpp_c_api_examples]# gdb ./vpp_api_client_vac_layer.o
>>> GNU gdb (GDB) Red Hat Enterprise Linux 8.3-3.el7
>>> Copyright (C) 2019 Free Software Foundation, Inc.
>>> License GPLv3+: GNU GPL version 3 or later <
>>> http://gnu.org/licenses/gpl.html>
>>> This is free software: you are free to change and redistribute it.
>>> There is NO WARRANTY, to the extent permitted by law.
>>> Type "show copying" and "show warranty" for details.
>>> This GDB was configured as "x86_64-redhat-linux-gnu".
>>> Type "show configuration" for configuration details.
>>> For bug reporting instructions, please see:
>>> <http://www.gnu.org/software/gdb/bugs/>.
>>> Find the GDB manual and other documentation resources online at:
>>>     <http://www.gnu.org/software/gdb/documentation/>.
>>>
>>> For help, type "help".
>>> Type "apropos word" to search for commands related to "word"...
>>> Reading symbols from ./vpp_api_client_vac_layer.o...
>>> (No debugging symbols found in ./vpp_api_client_vac_layer.o)
>>> (gdb) r
>>> Starting program: /root/vpp_c_api_examples/vpp_api_client_vac_layer.o
>>> Missing separate debuginfos, use: debuginfo-install
>>> glibc-2.17-324.el7_9.x86_64
>>> [Thread debugging using libthread_db enabled]
>>> Using host libthread_db library "/lib64/libthread_db.so.1".
>>> vpp_api_client_vac_layer.o:
>>> /vpp/build-root/rpmbuild/vpp-21.06.0/src/vpp-api/client/client.c:295:
>>> vac_connect: Assertion `clib_mem_get_heap ()' failed.
>>>
>>> Program received signal SIGABRT, Aborted.
>>> 0x00007ffff7827387 in raise () from /lib64/libc.so.6
>>> (gdb) bt
>>> #0  0x00007ffff7827387 in raise () from /lib64/libc.so.6
>>> #1  0x00007ffff7828a78 in abort () from /lib64/libc.so.6
>>> #2  0x00007ffff78201a6 in __assert_fail_base () from /lib64/libc.so.6
>>> #3  0x00007ffff7820252 in __assert_fail () from /lib64/libc.so.6
>>> #4  0x00007ffff7f57bcd in vac_connect (name=0x402010 "vac_client",
>>> chroot_prefix=0x0, cb=0x4011d2 <wrap_vac_callback>, rx_qlen=32)
>>>     at /usr/src/debug/vpp-21.06.0/src/vpp-api/client/client.c:314
>>> #5  0x0000000000401227 in test_connect ()
>>> #6  0x0000000000401687 in main ()
>>> (gdb)
>>>
>>> Startup.conf
>>> [root@8f57181df3a1 vpp_c_api_examples]# cat /etc/vpp/startup.conf
>>> unix {
>>>   #nodaemon
>>>   #interactive
>>>   log /var/log/vpp/vpp.log
>>>   cli-listen /run/vpp/cli.sock
>>>   gid vpp
>>>   #exec /etc/ipsec-setup.txt
>>> }
>>>
>>> cpu {
>>>   main-core 2
>>> }
>>>
>>> dpdk {
>>>   dev default {
>>>      num-rx-desc 512
>>>      num-tx-desc 512
>>>   }
>>>   socket-mem 1024
>>>   dev 0000:00:04.0
>>>   uio-driver uio_pci_generic
>>> }
>>>
>>> logging {
>>>   default-log-level debug
>>>   default-syslog-log-level info
>>> }
>>> [root@8f57181df3a1 vpp_c_api_examples]#
>>> I
>>> Is there some setting  i need to do in the startup.conf ?
>>>
>>> Please suggest a way to fix this assert.
>>>
>>> Thanks,
>>> Regards
>>> Venu
>>>
>>> On Thu, 30 Sept 2021 at 21:08, Benoit Ganne (bganne) <bga...@cisco.com>
>>> wrote:
>>>
>>>> You should remove -lvlib it is not needed here.
>>>> If you really want to link with vlib, you must fix the link ordering:
>>>> vlib depends upon vppinfra (where os_exit is defined) so you'd need link as
>>>> -lvlib -lvppinfra instead of the opposite (the C linker scan libraries
>>>> symbols in reverse order, so symbols declared in a library are available to
>>>> libraries listed *before*).
>>>>
>>>> Best
>>>> ben
>>>>
>>>> > -----Original Message-----
>>>> > From: vpp-dev@lists.fd.io <vpp-dev@lists.fd.io> On Behalf Of
>>>> Venumadhav
>>>> > Josyula
>>>> > Sent: jeudi 30 septembre 2021 16:09
>>>> > To: Akash S R <akashsr.akas...@gmail.com>
>>>> > Cc: Benoit Ganne (bganne) <bga...@cisco.com>; Ole Troan
>>>> > <otr...@employees.org>; RaviKiran Veldanda <ravi.jup...@gmail.com>;
>>>> vpp-
>>>> > dev <vpp-dev@lists.fd.io>
>>>> > Subject: Re: [vpp-dev] VPP Socket API how to use from the application
>>>> > #socket-api #vpp #sock-api
>>>> >
>>>> > Hi Akash,
>>>> >
>>>> > Thansks, now after devtoolset,
>>>> >
>>>> >
>>>> > @Benoit Ganne (bganne) <mailto:bga...@cisco.com>  , @Ole Troan
>>>> > <mailto:otr...@employees.org>
>>>> >
>>>> > i am getting following error
>>>> >
>>>> > [root@8f57181df3a1 vpp_c_api_examples]# gcc vpp_api_client_test3.c -o
>>>> > vpp_api_client_test3.o -lvlibmemoryclient -lsvm -lvppinfra -lvlib
>>>> > /opt/rh/devtoolset-9/root/usr/libexec/gcc/x86_64-redhat-linux/9/ld:
>>>> > /lib/../lib64/libvlib.so: undefined reference to
>>>> > `classify_get_trace_chain'
>>>> > /opt/rh/devtoolset-9/root/usr/libexec/gcc/x86_64-redhat-linux/9/ld:
>>>> > /lib/../lib64/libvlib.so: undefined reference to
>>>> > `stat_segment_register_gauge'
>>>> > /opt/rh/devtoolset-9/root/usr/libexec/gcc/x86_64-redhat-linux/9/ld:
>>>> > /lib/../lib64/libvlib.so: undefined reference to `os_exit'
>>>> > collect2: error: ld returned 1 exit status
>>>> > [root@8f57181df3a1 vpp_c_api_examples]#
>>>> >
>>>> > Let me paste the code again,
>>>> > #include<stdio.h>
>>>> > #include<stdlib.h>
>>>> > #include <vlibapi/api.h>
>>>> > #include <vlibmemory/api.h>
>>>> > #include <vpp/api/vpe_msg_enum.h>
>>>> >
>>>> > #define vl_typedefs
>>>> > #define vl_endianfun
>>>> > #include <vpp/api/vpe_all_api_h.h>
>>>> > #undef vl_typedefs
>>>> > #undef vl_endianfun
>>>> >
>>>> > int main()
>>>> > {
>>>> >    char *name = "vpp-test-app";
>>>> >
>>>> >    clib_mem_init_thread_safe (0, 64ULL << 20);
>>>> >
>>>> >    if (vl_client_api_map("/vpe-api"))
>>>> >    {
>>>> >         printf("unable to map....\n");
>>>> >         goto quit;
>>>> >    }
>>>> >    if (vl_client_connect("vpp-test-app", 0, 32) < 0)
>>>> >    {
>>>> >         printf("unable to connect \n");
>>>> >         vl_client_api_unmap();
>>>> >         goto quit;
>>>> >    }
>>>> >    printf("successfully connected... \n");
>>>> >  quit:
>>>> >         return 0;
>>>> > }
>>>> >
>>>> > Is this wrong way, i am trying to use APIs ?
>>>> >
>>>> > Thanks,
>>>> > Regards
>>>> > Venu
>>>> >
>>>> >
>>>> > On Thu, 30 Sept 2021 at 19:00, Akash S R <akashsr.akas...@gmail.com
>>>> > <mailto:akashsr.akas...@gmail.com> > wrote:
>>>> >
>>>> >
>>>> >       Hey Venu,
>>>> >
>>>> >       Try "scl enable devtoolset-9 bash" inside your docker or update
>>>> your
>>>> > gcc version.
>>>> >
>>>> >
>>>> >       /Akash S R
>>>> >
>>>> >       On Thu, Sep 30, 2021, 18:54 Venumadhav Josyula <
>>>> vjosy...@gmail.com
>>>> > <mailto:vjosy...@gmail.com> > wrote:
>>>> >
>>>> >
>>>> >               Hi Benoit,
>>>> >
>>>> >               Thanks for quick reply.
>>>> >
>>>> >               I have docker with following
>>>> >               [root@8f57181df3a1 vpp_c_api_examples]# rpm -qa | grep
>>>> vpp
>>>> >               vpp-lib-21.06.0-4~g0d9d3a0.x86_64
>>>> >               vpp-api-lua-21.06.0-4~g0d9d3a0.x86_64
>>>> >               vpp-api-python3-21.06.0-4~g0d9d3a0.x86_64
>>>> >               vpp-debuginfo-21.06.0-4~g0d9d3a0.x86_64
>>>> >               vpp-selinux-policy-21.06.0-4~g0d9d3a0.x86_64
>>>> >               vpp-21.06.0-4~g0d9d3a0.x86_64
>>>> >               vpp-plugins-21.06.0-4~g0d9d3a0.x86_64
>>>> >               vpp-devel-21.06.0-4~g0d9d3a0.x86_64
>>>> >
>>>> >               This will vpp running in it.
>>>> >
>>>> >               [root@8f57181df3a1 /]# cat /etc/redhat-release
>>>> >               CentOS Linux release 7.3.1611 (Core)
>>>> >               [root@8f57181df3a1 /]#
>>>> >
>>>> >               > Eg. use devtoolset-9 (gcc-9).
>>>> >
>>>> >
>>>> >               How do I use it ?
>>>> >
>>>> >               Thanks,
>>>> >               Regards,
>>>> >               Venu
>>>> >
>>>> >
>>>> >               On Thu, 30 Sept 2021 at 18:47, Benoit Ganne (bganne)
>>>> > <bga...@cisco.com <mailto:bga...@cisco.com> > wrote:
>>>> >
>>>> >
>>>> >                       You should upgrade your compiler... GCC-4 is
>>>> way too
>>>> > old.
>>>> >                       Eg. use devtoolset-9 (gcc-9).
>>>> >
>>>> >                       Best
>>>> >                       ben
>>>> >
>>>> >                       > -----Original Message-----
>>>> >                       > From: vpp-dev@lists.fd.io <mailto:
>>>> vpp-dev@lists.fd.io>
>>>> > <vpp-dev@lists.fd.io <mailto:vpp-dev@lists.fd.io> > On Behalf Of
>>>> > Venumadhav
>>>> >                       > Josyula
>>>> >                       > Sent: jeudi 30 septembre 2021 14:49
>>>> >                       > To: otr...@employees.org <mailto:
>>>> otr...@employees.org>
>>>> >                       > Cc: RaviKiran Veldanda <ravi.jup...@gmail.com
>>>> > <mailto:ravi.jup...@gmail.com> >; vpp-dev <vpp-
>>>> >                       > d...@lists.fd.io <mailto:d...@lists.fd.io> >
>>>> >                       > Subject: Re: [vpp-dev] VPP Socket API how to
>>>> use from
>>>> > the application
>>>> >                       > #socket-api #vpp #sock-api
>>>> >                       >
>>>> >                       > Hi Ole / Others,
>>>> >                       >
>>>> >                       >
>>>> >                       >
>>>> >                       > Thanks for your email, i getting following
>>>> compilation
>>>> > error
>>>> >                       > [root@8f57181df3a1 vpp_c_api_examples]# gcc
>>>> > vpp_api_client_test3.c -o
>>>> >                       > vpp_api_client_test3.o -lvlibmemoryclient
>>>> -lsvm -
>>>> > lvppinfra -lvlib
>>>> >                       > In file included from
>>>> > /usr/include/vppinfra/error.h:41:0,
>>>> >                       >                  from
>>>> /usr/include/vlibapi/api.h:24,
>>>> >                       >                  from
>>>> vpp_api_client_test3.c:3:
>>>> >                       > /usr/include/vppinfra/clib.h:43:18: error:
>>>> missing
>>>> > binary operator before
>>>> >                       > token "("
>>>> >                       >  #if __has_include(<vppinfra/config.h>)
>>>> >                       >                   ^
>>>> >                       > In file included from
>>>> > /usr/include/vppinfra/mem.h:49:0,
>>>> >                       >                  from
>>>> /usr/include/vppinfra/vec.h:42,
>>>> >                       >                  from
>>>> > /usr/include/vppinfra/error.h:53,
>>>> >                       >                  from
>>>> /usr/include/vlibapi/api.h:24,
>>>> >                       >                  from
>>>> vpp_api_client_test3.c:3:
>>>> >                       > /usr/include/vppinfra/string.h:92:34: error:
>>>> expected
>>>> > ';', ',' or ')'
>>>> >                       > before 'dst'
>>>> >                       >  clib_memcpy_fast (void *restrict dst, const
>>>> void
>>>> > *restrict src, size_t n)
>>>> >                       >                                   ^
>>>> >                       > [root@8f57181df3a1 vpp_c_api_examples]# vim
>>>> > /usr/include/vppinfra/clib.h
>>>> >                       > +43
>>>> >                       > [root@8f57181df3a1 vpp_c_api_examples]# vim
>>>> > /usr/include/vppinfra/clib.h
>>>> >                       > +43
>>>> >                       > [root@8f57181df3a1 vpp_c_api_examples]# gcc
>>>> --version
>>>> >                       > gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)
>>>> >                       > Copyright (C) 2015 Free Software Foundation,
>>>> Inc.
>>>> >                       > This is free software; see the source for
>>>> copying
>>>> > conditions.  There is NO
>>>> >                       > warranty; not even for MERCHANTABILITY or
>>>> FITNESS FOR
>>>> > A PARTICULAR
>>>> >                       > PURPOSE.
>>>> >                       >
>>>> >                       > [root@8f57181df3a1 vpp_c_api_examples]#
>>>> >                       >
>>>> >                       >
>>>> >                       > -----------------
>>>> >                       >
>>>> >                       > c -code
>>>> >                       > ----------------
>>>> >                       >
>>>> >                       >
>>>> >                       > #include<stdio.h>
>>>> >                       > #include<stdlib.h>
>>>> >                       > #include <vlibapi/api.h>
>>>> >                       > #include <vlibmemory/api.h>
>>>> >                       > #include <vpp/api/vpe_msg_enum.h>
>>>> >                       >
>>>> >                       > #define vl_typedefs
>>>> >                       > #define vl_endianfun
>>>> >                       > #include <vpp/api/vpe_all_api_h.h>
>>>> >                       > #undef vl_typedefs
>>>> >                       > #undef vl_endianfun
>>>> >                       >
>>>> >                       > int main()
>>>> >                       > {
>>>> >                       >    char *name = "vpp-test-app";
>>>> >                       >
>>>> >                       >    clib_mem_init_thread_safe (0, 64ULL << 20);
>>>> >                       >
>>>> >                       >    if (vl_client_api_map("/vpe-api"))
>>>> >                       >    {
>>>> >                       >         printf("unable to map....\n");
>>>> >                       >         goto quit;
>>>> >                       >    }
>>>> >                       >    if (vl_client_connect("vpp-test-app", 0,
>>>> 32) < 0)
>>>> >                       >    {
>>>> >                       >         printf("unable to connect \n");
>>>> >                       >         vl_client_api_unmap();
>>>> >                       >         goto quit;
>>>> >                       >    }
>>>> >                       >    printf("successfully connected... \n");
>>>> >                       >  quit:
>>>> >                       >         return 0;
>>>> >                       > }
>>>> >                       >
>>>> >                       >
>>>> >                       > ------------
>>>> >                       >
>>>> >                       >
>>>> >                       > Can you please suggest what can i be doing
>>>> worng ?
>>>> >                       >
>>>> >                       >
>>>> >                       > Thanks,
>>>> >                       > Regards,
>>>> >                       > Venu
>>>> >                       >
>>>> >                       >
>>>> >                       > On Thu, 30 Sept 2021 at 13:21, <
>>>> otr...@employees.org
>>>> > <mailto:otr...@employees.org>
>>>> >                       > <mailto:otr...@employees.org
>>>> > <mailto:otr...@employees.org> > > wrote:
>>>> >                       >
>>>> >                       >
>>>> >                       >       Hi Venu,
>>>> >                       >
>>>> >                       >       > Any examples for VAPI shared to use
>>>> binary
>>>> > APIs ?
>>>> >                       >
>>>> >                       >       Try this for a start:
>>>> >                       >       https://git.fd.io/vpp/tree/src/vpp-
>>>> > api/vapi/vapi_c_test.c
>>>> >                       >
>>>> >                       >       Cheers,
>>>> >                       >       Ole
>>>> >                       >
>>>> >                       >
>>>> >
>>>> >
>>>> >
>>>> >
>>>> >
>>>>
>>>>
>>>
>>>
>>>
>>
>> --
>> Best regards
>> Stanislav Zaikin
>>
>
> 
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#20300): https://lists.fd.io/g/vpp-dev/message/20300
Mute This Topic: https://lists.fd.io/mt/85796959/21656
Mute #vpp:https://lists.fd.io/g/vpp-dev/mutehashtag/vpp
Mute #socket-api:https://lists.fd.io/g/vpp-dev/mutehashtag/socket-api
Mute #sock-api:https://lists.fd.io/g/vpp-dev/mutehashtag/sock-api
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to