Hi , What could be the reason for the " l2-flood: BVI packet with unhandled ethertype " error? Could gns3 simulation conditions cause it?
On Mon, Aug 9, 2021 at 11:53 AM Mohsen Meamarian via lists.fd.io <meamarian.mohsen=gmail....@lists.fd.io> wrote: > Hi friends , > I have a problem with ARP delivery to the BVI interface on a BD. I see in > trace that the ARP packet after l2 flooding goes to the Non-BVI output > interface , but this doesn't happen for a loopback/BVI interface. thus I > can't ping 100.3.4.4 from 100.3.4.11. > > create bridge-domain 2 > set int l2 bridge GigabitEthernet2/6/0 2 > set int state GigabitEthernet2/6/0 up > > create loopback interface > set int l2 bridge loop0 2 bvi > set int state loop0 up > set int ip address loop0 100.3.4.12 / 3.3.3.3/24 > > Should I configure a route for loop0/BVI or use set ip arp command? > I also use ip route table 0 100.3.4.0/24 via loop0 but the problem > remains.I use vpp 18.10. > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#19934): https://lists.fd.io/g/vpp-dev/message/19934 Mute This Topic: https://lists.fd.io/mt/84763705/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
