VPP implements both active and passive modes. The default operation mode is active. The current setting for the port, active/passive, can be inferred from the output of show lacp. In the active state column, I see act=1 for all 4 ports.
The output of the show bond command looks like VPP is already in sync with the remote partner in forming the bonding, with 2 member interfaces and both are negotiated successfully with the remote partner. I remember the Nexus switch sometimes tends to put the port in suspended mode when it does not receive LACP PDU in the bootup. I think the way to recover is to kick the port in the switch, ie, shut and no shut to wake it up. Steven From: <vpp-dev@lists.fd.io> on behalf of Marcos - Mgiga <mar...@mgiga.com.br> Date: Tuesday, February 16, 2021 at 7:42 AM To: 'vpp-dev' <vpp-dev@lists.fd.io> Subject: [vpp-dev] LACP Troubleshooting Hi there, I’m facing some troubles When connecting VPP to a Cisco Nexus 3k, Where one of switch’s port remains in “suspended” state indicating its no receiving any LACP PDU. I got this same VPP server connected to a Huweii S6720 Switch and this situation does not occur. Here is the output of show LACP and show Bond command: [cid:image001.jpg@01D70446.55B1DAA0] I would like to know if VPP ports attached to bond interfaces are in active mode by default or if am I supposed to set it manually. Any suggestion ? Best Regards Marcos
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#18759): https://lists.fd.io/g/vpp-dev/message/18759 Mute This Topic: https://lists.fd.io/mt/80680845/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
