Additionally, please figure out why carrier is down. It needs to be up.
Intel 82599
carrier down
Steven
From: <vpp-dev@lists.fd.io> on behalf of Dave Barach <v...@barachs.net>
Date: Sunday, December 20, 2020 at 4:58 AM
To: 'Merve' <merveorakc...@gmail.com>, "vpp-dev@lists.fd.io"
<vpp-dev@lists.fd.io>
Subject: Re: [vpp-dev] Blackholed packets after forwarding interface output
“trace add dpdk-input 100” ... run a bit of traffic ... “show trace”. That will
tell you precisely what’s happening. Check the outbound src and dst MAC
addresses. It’s quite possible that they have NOT been swapped...
D.
From: vpp-dev@lists.fd.io <vpp-dev@lists.fd.io> On Behalf Of Merve
Sent: Sunday, December 20, 2020 5:46 AM
To: vpp-dev@lists.fd.io
Subject: [vpp-dev] Blackholed packets after forwarding interface output
Hi everyone. I created a plugin for process packet. After process İ forward
packets interface output. For testing, I generate packet with trex and send
vpp. Trex send packet vpp but after process in my node, vpp not send to trex.
But when show int:
TenGigabitEthernet1/0/1 2 up 9000/0/0/0 rx packets
47034936
rx bytes
2822096160
tx packets
47034934
tx bytes
2163606978
it seems to be transfer packet, but not see in trex.
vpp# show errors
Count Node Reason
Severity
1 TenGigabitEthernet1/0/0-output interface is down
error
1 TenGigabitEthernet1/0/1-output interface is down
error
11961361 null-node blackholed packets
error
1 dpdk-input no error
error
2 arp-reply ARP replies sent
error
1 TenGigabitEthernet1/0/0-output interface is down
error
23381499 null-node blackholed packets
error
1 dpdk-input no error
error
2 arp-reply ARP replies sent
error
1 TenGigabitEthernet1/0/1-output interface is down
error
11692073 null-node blackholed packets
error
these packets "blackholed"
Intel 82599
carrier down
flags: admin-up pmd maybe-multiseg tx-offload intel-phdr-cksum rx-ip4-cksum
rx: queues 4 (max 128), desc 2048 (min 32 max 4096 align 8)
tx: queues 4 (max 64), desc 2048 (min 32 max 4096 align 8)
pci: device 8086:1528 subsystem 15d9:0734 address 0000:01:00.01 numa 0
max rx packet len: 15872
promiscuous: unicast off all-multicast on
vlan offload: strip off filter off qinq off
rx offload avail: vlan-strip ipv4-cksum udp-cksum tcp-cksum tcp-lro
macsec-strip vlan-filter vlan-extend jumbo-frame scatter
security keep-crc rss-hash
rx offload active: ipv4-cksum jumbo-frame scatter
tx offload avail: vlan-insert ipv4-cksum udp-cksum tcp-cksum sctp-cksum
tcp-tso macsec-insert multi-segs security
tx offload active: udp-cksum tcp-cksum multi-segs
rss avail: ipv4-tcp ipv4-udp ipv4 ipv6-tcp-ex ipv6-udp-ex ipv6-tcp
ipv6-udp ipv6-ex ipv6
rss active: ipv4-tcp ipv4-udp ipv4 ipv6-tcp-ex ipv6-udp-ex ipv6-tcp
ipv6-udp ipv6-ex ipv6
tx burst function: ixgbe_xmit_pkts
rx burst function: ixgbe_recv_scattered_pkts_vec
tx frames ok 47034934
tx bytes ok 2822096040
rx frames ok 47034936
rx bytes ok 2822096160
rx missed 384981066
extended stats:
rx_good_packets 47034936
tx_good_packets 47034934
rx_good_bytes 2822096160
tx_good_bytes 2822096040
rx_missed_errors 384981066
rx_q0_packets 47034936
rx_q0_bytes 2822096160
tx_q0_packets 47034934
tx_q0_bytes 2163606978
mac_local_errors 52
mac_remote_errors 2
rx_size_64_packets 432016002
rx_broadcast_packets 3
rx_total_packets 432016002
rx_total_bytes 25920960120
tx_total_packets 47034934
tx_size_64_packets 47034934
tx_multicast_packets 47034933
out_pkts_untagged 47034934
rx_priority0_dropped 384981066
it seem to be received. I cant understand problem.
for trex configuration :
ip route add 16.0.0.0/8 via 10.10.1.2
ip route add 48.0.0.0/8 via 10.10.2.2
Do you have any advice about this problem?
Thanks,
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#18402): https://lists.fd.io/g/vpp-dev/message/18402
Mute This Topic: https://lists.fd.io/mt/79101024/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
