Hi Igor, Could you try [1] instead the echo apps.
Regards, Florin [1] https://wiki.fd.io/view/VPP/HostStack/LDP/iperf > On May 6, 2020, at 9:41 AM, igorkor.3v...@gmail.com wrote: > > Hi > > Guys > > I'm learning HostStack and have tried example from this page > https://wiki.fd.io/view/VPP/HostStack <https://wiki.fd.io/view/VPP/HostStack> > For some unclear reason it doesn't work. At the same moment example from > https://wiki.fd.io/view/VPP/HostStack/EchoClientServer > <https://wiki.fd.io/view/VPP/HostStack/EchoClientServer> works correctly. > > > My configuration is: > > Ubuntu 16.04 on vagrant. > > 2 linked veths, 2 vpp instances. Configuration files are attached( > startup1.conf and startup2.conf use vpp1.conf and vpp2.conf respectively) > > > I cloned the latest version of vpp from git by link > https://gerrit.fd.io/r/vpp <https://gerrit.fd.io/r/vpp>. Branch is master. > > When i try to initialize server by command: > > sudo build-root/install-vpp_debug-native/vpp/bin/vpp_echo server uri > tcp://10.0.0.1/1000 > > I receive the following error log: > > Timing qconnect:lastbyte > Missing Start Timing Event (qconnect)! > Missing End Timing Event (lastbyte)! > -------- TX -------- > 0 bytes (0 mbytes, 0 gbytes) in 0.000000 seconds > -------- RX -------- > 0 bytes (0 mbytes, 0 gbytes) in 0.000000 seconds > -------------------- > Received close on 0 streams (and 0 Quic conn) > Received reset on 0 streams (and 0 Quic conn) > Sent close on 0 streams (and 0 Quic conn) > Discarded 0 streams (and 0 Quic conn) > -------------------- > Got accept on 0 streams (and 0 Quic conn) > Got connected on 0 streams (and 0 Quic conn) > > Failure Return Status: 42 > ECHO_FAIL_VL_API_APP_ATTACH (23): attach failed: Unsupported application > config | ECHO_FAIL_ATTACH_TO_VPP (17): Couldn't attach to vpp, did you run > <session enable> ? | ECHO_FAIL_MISSING_START_EVENT (41): Expected event > qconnect to happen, but it did not! | ECHO_FAIL_MISSING_END_EVENT (42): > Expected event lastbyte to happen, but it did not! > > 1. Can you advice on this issue, please? > > 2. What is the difference between vpp_echo application and "test echo" > command in vppctl? > > > Regards > Igor > > <startup1.conf><startup2.conf><vpp1.conf><vpp2.conf>
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#16251): https://lists.fd.io/g/vpp-dev/message/16251 Mute This Topic: https://lists.fd.io/mt/74032498/21656 Mute #hoststack: https://lists.fd.io/mk?hashtag=hoststack&subid=1480452 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
