+1, with two additional notes. 

18.01 is over two years old. It's not supported anymore. If you absolutely must 
go there, "Use the Force and Read the Source..."

Since vpp 18.01 was released, I've rewritten the pcap trace cli. Ben is 
probably right, but that's about all I can say at this point.

FWIW... Dave 

-----Original Message-----
From: vpp-dev@lists.fd.io <vpp-dev@lists.fd.io> On Behalf Of Benoit Ganne 
(bganne) via lists.fd.io
Sent: Tuesday, April 28, 2020 12:09 PM
To: Deepak NC <ncdee...@gmail.com>; vpp-dev@lists.fd.io
Subject: Re: [vpp-dev] wireshark log capture with "any " option #vpp

Did you try to "pcap rx off"? I think the capture is dumped only when turned 
off.

ben

> -----Original Message-----
> From: vpp-dev@lists.fd.io <vpp-dev@lists.fd.io> On Behalf Of Deepak NC
> Sent: mardi 28 avril 2020 17:47
> To: vpp-dev@lists.fd.io
> Subject: [vpp-dev] wireshark log capture with "any " option #vpp
> 
> Hi,
> 
> 
> 
> For packet capture the “pcap rx trace on max <nn> any” option not working.
> 
> https://docs.fd.io/vpp/17.04/clicmd_src_vnet_devices_dpdk.html
> <https://docs.fd.io/vpp/17.04/clicmd_src_vnet_devices_dpdk.html>
> 
> pcap rx trace [on|off] [max <nn>] [intfc <interface>|any] [file <name>]
> 
> 
> 
> VPP version used is: vVPP_18.01
> 
> Interface:
> 
>               Name               Idx    State  MTU (L3/IP4/IP6/MPLS)
> Counter          Count
> GigabitEthernet0/4/0              1      up          9000/0/0/0     rx
> packets                541797
>                                                                     rx
> bytes                87675422
>                                                                     tx
> packets               7610998
>                                                                     tx
> bytes             10239458226
>                                                                     drops
> 14828
>                                                                     ip4
> 524859
>                                                                     tx-
> error                    4088
> GigabitEthernet0/5/0              2      up          9000/0/0/0     rx
> packets              29725455
>                                                                     rx
> bytes             24793775133
>                                                                     tx
> packets              15574677
>                                                                     tx
> bytes              4802873550
>                                                                     drops
> 38505
>                                                                     ip4
> 29711897
>                                                                     tx-
> error                   37324
> local0                            0     down          0/0/0/0       drops
> 152
> 
> 
> 
> Please let me know why I am seeing this issue?
> 
> 
> 
> Thanks and regards
> 
> Deepak
> 
> 
> 
> 
> 
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#16179): https://lists.fd.io/g/vpp-dev/message/16179
Mute This Topic: https://lists.fd.io/mt/73329885/21656
Mute #vpp: https://lists.fd.io/mk?hashtag=vpp&subid=1480452
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub  [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to