I'm testing the NAT feature, and after configuring the NAT, the trace information is as follows below， Why is the nat44-in2out-worker-handoff node followed by the nat44-out2in node instead of the nat44-in2out node?
P.S: trace information Packet 1 02:23:07:173961: af-packet-input af_packet: hw_if_index 7 next-index 4 tpacket2_hdr: status 0x20000001 len 98 snaplen 98 mac 66 net 80 sec 0x5df85360 nsec 0x2e9e94c8 vlan 0 vlan_tpid 0 02:23:07:173970: ethernet-input IP4: 42:64:0a:23:df:a3 -> de:ad:00:00:00:00 02:23:07:173975: l2-input l2-input: sw_if_index 7 dst de:ad:00:00:00:00 src 42:64:0a:23:df:a3 02:23:07:173979: l2-learn l2-learn: sw_if_index 7 dst de:ad:00:00:00:00 src 42:64:0a:23:df:a3 bd_index 3 02:23:07:173983: l2-fwd l2-fwd: sw_if_index 7 dst de:ad:00:00:00:00 src 42:64:0a:23:df:a3 bd_index 3 result [0x70000000a, 10] static age-not bvi 02:23:07:173987: ip4-input ICMP: 10.10.0.1 -> 10.10.1.1 tos 0x00, ttl 64, length 84, checksum 0xcdaa fragment id 0x57e9, flags DONT_FRAGMENT ICMP echo_request checksum 0x5686 02:23:07:173991: nat44-in2out-worker-handoff NAT44_IN2OUT_WORKER_HANDOFF : next-worker 1 trace index 0 02:23:07:173999: nat44-out2in NAT44_OUT2IN: sw_if_index 10, next index 0, session index -1 02:23:07:174005: error-drop rx:loop0 02:23:07:174008: drop nat44-out2in: no translation Best Regards!!!
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#14907): https://lists.fd.io/g/vpp-dev/message/14907 Mute This Topic: https://lists.fd.io/mt/68755389/21656 Mute #nat44: https://lists.fd.io/mk?hashtag=nat44&subid=1480452 Mute #nat: https://lists.fd.io/mk?hashtag=nat&subid=1480452 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
