Hi,
We have 2 Worker threads. Each thread is pinned to one Core, so total 2 Cores. 
All are in One NUMA node, with Socket 0.We have also below config.

1.

socket-mem 2048

num-rx-queues 1
num-tx-queues 3

num-mbufs 61000

2.
With IPSEC,GCM128 algoritm
Reassembly Buffer 8192 .

Traffic profile which we are testing :
IPSEC Algorithm Used :GCM128
Traffic received at one interface (Downlink) is Encrypted traffic and 50% of 
the received traffic is fragmented traffic destined to the DUT-VPP.
Traffic pumped from the other connected entity at 5.5Gpbs in Downlink direction.
We observe the below error in "show hardware interfaces " : 
*rx-mbuf-allocation-errors* and *rx missed errors*
*
*
EthernetSwitch2/0/0                2     up   EthernetSwitch2/0/0
Intel FM10000 Family Ethernet Switch
carrier up full duplex speed 50000 mtu 9990
flags: admin-up pmd maybe-multiseg subif
rx queues 1, rx desc 8192, tx queues 3, tx desc 8192
cpu socket 0

tx frames ok                                    22341752
tx bytes ok                                   7128341512
rx frames ok                                    44697952
rx bytes ok                                  32081699092
rx missed                                        7083446
extended stats:
rx good packets                               44697952
tx good packets                               22341752
rx good bytes                              32081699092
tx good bytes                               7128341512
*rx missed errors                               7083781*
rx q0packets                                  44697952
rx q0bytes                                 32081699092
rx q0errors                                    7083781
tx q2packets                                  22341752
tx q2bytes                                  7128341512
*rx mbuf allocation errors                      7083446*
rx q0 packets                                 44697952
rx q0 bytes                                32081699092
rx q0 dropped                                  7083446
tx q2 packets                                 22341752
tx q2 bytes                                 7128341512

Request experts to show some light on  the reason behind these errors?
Also request experts to suggest any hack/workaround to get over this?

[
NB: From FDIO doc," The number of buffers are calculated from the number of rx 
queues.

The number of RX,TX Descriptors and TX queues are calculated from the number of 
RX queues.

]
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#13733): https://lists.fd.io/g/vpp-dev/message/13733
Mute This Topic: https://lists.fd.io/mt/32862795/21656
Mute #vpp: https://lists.fd.io/mk?hashtag=vpp&subid=1480452
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub  [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to