Hi Dave, Thanks for the reply.
I am still seeing the same issue. Here is what I am doing. 1) Created 2 VPP instances 2) Created Memif interfaces on each of them and assigned IP addresses to them 3) Able to ping the IPs from one another successfully. 4) On VPP-1, started ping of interface on VPP-2 instance as below DBGvpp# ping 1.1.1.2 repeat 100000 interval 0.0001 5) While the ping is running on VPP-1 CLI, ran following commands on VPP-2 CLI DBGvpp# set pmc cpu-cycles Start collection for 1 events, wait 1.00 seconds DEADMAN: collection still running... Data collection complete... 6) Ran show pmc to check the data DBGvpp# show pmc Data collection in progress... This is always showing it as "Data collection in progress". I am using official version of fdio.1904 in this activity. Am I missing anything obvious ? -- Thanks & Regards, Murthy
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#13294): https://lists.fd.io/g/vpp-dev/message/13294 Mute This Topic: https://lists.fd.io/mt/32064990/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
