Hello Everyone:
As we all knows, the latest VPP version 18.10 support telnet.
We can set the conf file like this to monitor the remote telnet request:
unix {
cli-listen localhost 5002 or cli-listen 192.168.xxxx 5002
...
But actually the IP/Port pair we are listening is the "in-band" interface.
That means that interface belongs to the Linux host system(not the dedicate
NIC pre-allocated for VPP)
Is there any solution for telnet/ssh toward the VPP in-band interface?
(Provide telnet/ssh support for in-band interface is very important when we
managed to build a gateway/router device
over bare metal machine, since we cannot guarantee we can involve additional
out-band interface with any topology and product cost limitation)
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#11408): https://lists.fd.io/g/vpp-dev/message/11408
Mute This Topic: https://lists.fd.io/mt/28320167/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
