[Edited Message Follows] I've created tap interface, got same issue. PADI forwarded to tapcli-0: 14:05:00:832297: dpdk-input GigabitEthernet2/0/2 rx queue 0 buffer 0xa3138: current data 0, length 60, free-list 0, clone-count 0, totlen- nifb 0, trace 0xb ext-hdr-valid l4-cksum-computed l4-cksum-correct l2-hdr-offset 0 PKT MBUF: port 1, nb_segs 1, pkt_len 60 buf_len 2176, data_len 60, ol_flags 0x180, data_off 128, phys_addr 0x474c4e8 0 packet_type 0x0 l2_len 0 l3_len 0 outer_l2_len 0 outer_l3_len 0 rss 0x0 fdir.hi 0x0 fdir.lo 0x0 Packet Offload Flags PKT_RX_IP_CKSUM_GOOD (0x0080) IP cksum of RX pkt. is valid PKT_RX_L4_CKSUM_GOOD (0x0100) L4 cksum of RX pkt. is valid PPPOE_DISCOVERY: 52:54:00:ea:ca:a5 -> ff:ff:ff:ff:ff:ff 14:05:00:832306: ethernet-input PPPOE_DISCOVERY: 52:54:00:ea:ca:a5 -> ff:ff:ff:ff:ff:ff 14:05:00:832308: pppoe-cp-dispatch PPPoE dispatch from sw_if_index 2 next 1 error 0 pppoe_code 0x9 ppp_proto 0x101 14:05:00:832309: tapcli-0-output tapcli-0 PPPOE_DISCOVERY: 52:54:00:ea:ca:a5 -> ff:ff:ff:ff:ff:ff
Received by openbras, openbras sends PADO to client 52:54:00:ea:ca:a5: 09:31:00.303271 PPPoE PADI [Service-Name] [Host-Uniq 0x40080000] 09:31:00.303420 PPPoE PADO [AC-Name "JSNJ-WFNEX-BRAS"] [Service-Name "JSNJ-BROADBAND-ACCESS"] [AC-Cookie 0xAE86ACA0534C12CB7E01655A0DBC7ADA8A060000] [Host-Uniq 0x40080000] But no was any packets received from tapcli-0 in trace. vpp v18.07.1-7~g9c335ce~b113 Thanks.
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#10829): https://lists.fd.io/g/vpp-dev/message/10829 Mute This Topic: https://lists.fd.io/mt/27327640/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-