Hi, In default configuration of vpp on single core, everything seems ok but when I want to get the most out of my hardware resources and modify vpp startup config, it crashes at some stages. Here is some carshes: 1- I set interface's IP and then when I plugged cables in ports, It suddenly carshes and system needs to be rebooted.
2- once I set up a vpls scenario and I was passing traffics without any problem but when I plugged out the cable connecting PE to P router while the traffic was comming, vpp crashed. In some cases, I use the same configurations but sometimes it crashes and sometimes it doesn't. How should I setup VPP to make it use all hardware resources?? I mean how should I set CPU cores, RAM and etc?? Thanks
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#10194): https://lists.fd.io/g/vpp-dev/message/10194 Mute This Topic: https://lists.fd.io/mt/24610978/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
