Hi Florin， Ed， I'm testing the vcl in udp mode. After our debug vpp can receive the udp packets , but the packets will be dropped . Trace info is shown below:
Packet 1 01:46:56:707843: af-packet-input af_packet: hw_if_index 1 next-index 4 tpacket2_hdr: status 0x81 len 106 snaplen 106 mac 66 net 80 sec 0x5b03780d nsec 0x3498f0be vlan 0 vlan_tpid 0 01:47:04:449319: ethernet-input IP4: 02:fe:3f:8d:97:a4 -> 02:fe:6e:ca:46:82 01:47:04:449340: ip4-input UDP: 2.1.1.1 -> 2.1.1.2 tos 0x00, ttl 255, length 92, checksum 0x758c fragment id 0x0000, flags DONT_FRAGMENT UDP: 3536 -> 2111 length 72, checksum 0x8106 01:47:04:449349: ip4-lookup fib 0 dpo-idx 7 flow hash: 0x00000000 UDP: 2.1.1.1 -> 2.1.1.2 tos 0x00, ttl 255, length 92, checksum 0x758c fragment id 0x0000, flags DONT_FRAGMENT UDP: 3536 -> 2111 length 72, checksum 0x8106 01:47:04:449360: ip4-local UDP: 2.1.1.1 -> 2.1.1.2 tos 0x00, ttl 255, length 92, checksum 0x758c fragment id 0x0000, flags DONT_FRAGMENT UDP: 3536 -> 2111 length 72, checksum 0x8106 01:47:04:449367: ip4-udp-lookup UDP: src-port 3536 dst-port 2111 01:47:04:449379: udp4-input UDP_INPUT: connection 0, disposition 4, thread 0 01:47:04:449415: error-drop udp4-input: UDP packets enqueued Is there a plan to support the udp mode in vcl? Thanks, Xyxue
