Hi, verify of 10920 would fail if it was rebased before submission.
JVPP generation was updated recently to use service definitions Instead of inferring message type based on its name. 10920 was verified against previous version. Here is updated version of 10920 with updated service definitions: https://gerrit.fd.io/r/#/c/10973/ Regards, Marek From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Dave Wallace Sent: 6 marca 2018 00:19 To: vpp-dev@lists.fd.io Subject: Re: [vpp-dev] VPP DPDK build failure with Mellanox interface(aarch64) Sirshak, The JVPP error was caused by a patch (10920) that somehow passed the Verify job, but failed during the merge job. I have just merged the patch (10965) which reverts the patch which introduced the JVPP build errors. Thanks, -daw- On 3/5/2018 5:44 PM, Sirshak Das wrote: Hi Marco, Thanks for replying. I am not sure if you read the last part of my email: Finally what is strange is if I copy dpdk-18.02.tar.gz to seperate location and turn MLx5 config and build this builds fine. Build drivers/net/mlx5 CC mlx5.o PMDINFO mlx5.o.pmd.c CC mlx5.o.pmd.o LD mlx5.o CC mlx5_glue.o CC mlx5_rxq.o CC mlx5_txq.o CC mlx5_rxtx.o CC mlx5_rxtx_vec.o CC mlx5_trigger.o CC mlx5_ethdev.o CC mlx5_mac.o CC mlx5_rxmode.o CC mlx5_vlan.o CC mlx5_stats.o CC mlx5_rss.o CC mlx5_mr.o CC mlx5_flow.o CC mlx5_socket.o AR librte_pmd_mlx5.a INSTALL-LIB librte_pmd_mlx5.a I dont know if Kernel Version is still an issue as dpdk(mlx5 pmd) works for me on its own. So in order to go past the issue I tried this change to vpp.mk: # DPDK configuration parameters vpp_uses_dpdk_mlx5_pmd = yes vpp_uses_external_dpdk = yes vpp_dpdk_inc_dir = <DPDK INSTALL DIR>/dpdk-18.02/build/include vpp_dpdk_lib_dir = <DPDK INSTALL DIR>/dpdk-18.02/build/lib vpp_dpdk_shared_lib = yes I was able to go past the issue but currently I am facing issue with jvpp building: $ javac -version javac 1.8.0_161 $ java -version java version "1.8.0_161" Java(TM) SE Runtime Environment (build 1.8.0_161-b12) Java HotSpot(TM) 64-Bit Server VM (build 25.161-b12, mixed mode) Entering directory '/home/sirdas/code/common/vpp/build-root/build-vpp-native/vpp/vpp-api/java' JVPP GEN jvpp-registry/io_fd_vpp_jvpp_VppJNIConnection.h JVPP GEN jvpp-gtpu/io_fd_vpp_jvpp_gtpu_JVppGtpuImpl.h JVPP GEN jvpp-pppoe/io_fd_vpp_jvpp_pppoe_JVppPppoeImpl.h JVPP GEN jvpp-core/io_fd_vpp_jvpp_core_JVppCoreImpl.h JVPP GEN jvpp-ioampot/io_fd_vpp_jvpp_ioampot_JVppIoampotImpl.h JVPP GEN jvpp-acl/io_fd_vpp_jvpp_acl_JVppAclImpl.h JVPP GEN jvpp-ioamexport/io_fd_vpp_jvpp_ioamexport_JVppIoamexportImpl.h JVPP GEN jvpp-ioamtrace/io_fd_vpp_jvpp_ioamtrace_JVppIoamtraceImpl.h JVPP GEN jvpp-nat/io_fd_vpp_jvpp_nat_JVppNatImpl.h jvpp-core/target/io/fd/vpp/jvpp/core/callfacade/CallbackJVppCoreFacade.java:2177: error: cannot find symbol public final void wantIp4NbrStats(io.fd.vpp.jvpp.core.dto.WantIp4NbrStats request, io.fd.vpp.jvpp.core.callback.WantIp4NbrStatsCallback callback) throws io.fd.vpp.jvpp.VppInvocationException { ^ symbol: class WantIp4NbrStatsCallback location: package io.fd.vpp.jvpp.core.callback jvpp-core/target/io/fd/vpp/jvpp/core/callfacade/CallbackJVppCoreFacade.java:2183: error: cannot find symbol public final void wantIp6NbrStats(io.fd.vpp.jvpp.core.dto.WantIp6NbrStats request, io.fd.vpp.jvpp.core.callback.WantIp6NbrStatsCallback callback) throws io.fd.vpp.jvpp.VppInvocationException { ^ symbol: class WantIp6NbrStatsCallback location: package io.fd.vpp.jvpp.core.callback jvpp-core/target/io/fd/vpp/jvpp/core/callfacade/CallbackJVppCore.java:368: error: cannot find symbol void wantIp4NbrStats(io.fd.vpp.jvpp.core.dto.WantIp4NbrStats request, io.fd.vpp.jvpp.core.callback.WantIp4NbrStatsCallback callback) throws io.fd.vpp.jvpp.VppInvocationException; ^ symbol: class WantIp4NbrStatsCallback location: package io.fd.vpp.jvpp.core.callback jvpp-core/target/io/fd/vpp/jvpp/core/callfacade/CallbackJVppCore.java:369: error: cannot find symbol void wantIp6NbrStats(io.fd.vpp.jvpp.core.dto.WantIp6NbrStats request, io.fd.vpp.jvpp.core.callback.WantIp6NbrStatsCallback callback) throws io.fd.vpp.jvpp.VppInvocationException; ^ symbol: class WantIp6NbrStatsCallback location: package io.fd.vpp.jvpp.core.callback jvpp-core/target/io/fd/vpp/jvpp/core/future/FutureJVppCoreFacade.java:1815: error: incompatible types: inference variable REPLY has incompatible bounds return send(request); ^ equality constraints: WantIp4NbrStats upper bounds: JVppReply<REQ> where REPLY,REQ are type-variables: REPLY extends JVppReply<REQ> declared in method <REQ,REPLY>send(REQ) REQ extends JVppRequest declared in method <REQ,REPLY>send(REQ) jvpp-core/target/io/fd/vpp/jvpp/core/future/FutureJVppCoreFacade.java:1820: error: incompatible types: inference variable REPLY has incompatible bounds return send(request); ^ equality constraints: WantIp6NbrStats upper bounds: JVppReply<REQ> where REPLY,REQ are type-variables: REPLY extends JVppReply<REQ> declared in method <REQ,REPLY>send(REQ) REQ extends JVppRequest declared in method <REQ,REPLY>send(REQ) If you or anybody else could help me with the issue it will be great. Thank you Sirshak Das Marco Varlese writes: Hi Sirshak, Can you please take a look at this thread: https://lists.fd.io/g/vpp-dev/message/8219 Also, take a look at http://dpdk.org/doc/guides/nics/mlx5.html for detailed explanations and steps for DPDK to work with Mellanox NICs... Likely, it's a kernel issue: for Mellanox latest PMD drivers (DPDK 17.11 and above) you're required to have 4.15.x whilst I see you're running 4.10.x Hope this helps. Cheers, Marco On Thu, 2018-03-01 at 18:02 -0600, Sirshak Das wrote: Hi all, I am facing an issue with building VPP with DPDK (Mellanox Drivers enabled) on aarch64. The OFED version installed: $ ofed_info -s MLNX_OFED_LINUX-4.2-1.2.0.0: Kernel Version: $ uname -r 4.10.0-28-generic Operating System Version: Ubuntu 16.04.4 LTS (GNU/Linux 4.10.0-28-generic aarch64) gcc version: gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) Target Machine: Qualcomm Centriq lspci: 0004:01:00.0 Ethernet controller: Mellanox Technologies MT27700 Family [ConnectX-4] Steps I followed: $ git clone ssh://<my-user-id>@gerrit.fd.io:29418/vpp.git $ cd vpp/ $ sed -i '/vpp_uses_dpdk_mlx5_pmd/s/^# //g' build-data/platforms/vpp.mk $ make dpdk-install-dev DPDK_MLX5_PMD=y <INSTALL DIR>/vpp/dpdk/deb/_build/dpdk- 18.02/drivers/net/mlx5/mlx5_flow.c:38:8: error: redefinition of ‘struct ibv_flow_spec_counter_action’ struct ibv_flow_spec_counter_action { ^ In file included from <INSTALL DIR>/vpp/dpdk/deb/_build/dpdk- 18.02/drivers/net/mlx5/mlx5_flow.c:14:0: /usr/include/infiniband/verbs.h:1360:8: note: originally defined here struct ibv_flow_spec_counter_action { By looking at this file: <INSTALL DIR>/vpp/dpdk/deb/_build/dpdk-18.02/arm64-armv8a-linuxapp- gcc/build/drivers/net/mlx5/mlx5_autoconf.h Which looks like this: /* HAVE_IBV_DEVICE_VXLAN_SUPPORT is not defined. */ /* HAVE_IBV_WQ_FLAG_RX_END_PADDING is not defined. */ /* HAVE_IBV_MLX5_MOD_MPW is not defined. */ /* HAVE_IBV_MLX5_MOD_CQE_128B_COMP is not defined. */ /* HAVE_ETHTOOL_LINK_MODE_25G is not defined. */ /* HAVE_ETHTOOL_LINK_MODE_50G is not defined. */ /* HAVE_ETHTOOL_LINK_MODE_100G is not defined. */ /* HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT is not defined. */ So I moved my attentions to this file: <INSTALL DIR>/vpp/dpdk/deb/_build/dpdk-18.02/drivers/net/mlx5/Makefile This whole section fails: mlx5_autoconf.h.new: $(RTE_SDK)/buildtools/auto-config- h.sh $Q $(RM) -f -- '$@' $Q sh -- '$<' '$@' \ HAVE_IBV_DEVICE_VXLAN_SUPPORT \ infiniband/verbs.h \ enum IBV_DEVICE_VXLAN_SUPPORT \ $(AUTOCONF_OUTPUT) $Q sh -- '$<' '$@' \ HAVE_IBV_WQ_FLAG_RX_END_PADDING \ infiniband/verbs.h \ enum IBV_WQ_FLAG_RX_END_PADDING \ $(AUTOCONF_OUTPUT) $Q sh -- '$<' '$@' \ HAVE_IBV_MLX5_MOD_MPW \ infiniband/mlx5dv.h \ enum MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED \ $(AUTOCONF_OUTPUT) $Q sh -- '$<' '$@' \ HAVE_IBV_MLX5_MOD_CQE_128B_COMP \ infiniband/mlx5dv.h \ enum MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP \ $(AUTOCONF_OUTPUT) $Q sh -- '$<' '$@' \ HAVE_ETHTOOL_LINK_MODE_25G \ /usr/include/linux/ethtool.h \ enum ETHTOOL_LINK_MODE_25000baseCR_Full_BIT \ $(AUTOCONF_OUTPUT) $Q sh -- '$<' '$@' \ HAVE_ETHTOOL_LINK_MODE_50G \ /usr/include/linux/ethtool.h \ enum ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT \ $(AUTOCONF_OUTPUT) $Q sh -- '$<' '$@' \ HAVE_ETHTOOL_LINK_MODE_100G \ /usr/include/linux/ethtool.h \ enum ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT \ $(AUTOCONF_OUTPUT) $Q sh -- '$<' '$@' \ HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT \ infiniband/verbs.h \ enum IBV_FLOW_SPEC_ACTION_COUNT \ $(AUTOCONF_OUTPUT) Which ideally shouldnt because all these files exist: $ ls -l /usr/include/infiniband/ total 156 -rw-r--r-- 1 root root 1939 Nov 25 12:17 arch.h -rw-r--r-- 1 root root 2897 Nov 25 12:17 ib.h -rw-r--r-- 1 root root 27353 Nov 25 12:17 kern-abi.h -rw-r--r-- 1 root root 12895 Nov 25 12:17 mlx4dv.h -rw-r--r-- 1 root root 17121 Nov 25 12:17 mlx5dv.h -rw-r--r-- 1 root root 5694 Nov 25 12:17 opcode.h -rw-r--r-- 1 root root 4074 Nov 25 12:17 sa.h -rw-r--r-- 1 root root 1622 Nov 25 12:17 sa-kern-abi.h -rw-r--r-- 1 root root 67777 Nov 25 12:17 verbs.h $ ls -l /usr/include/linux/ethtool.h -rw-r--r-- 1 root root 65636 Feb 12 17:44 /usr/include/linux/ethtool.h Finally what is strange is if I copy dpdk-18.02.tar.gz to seperate location and turn MLx5 config and build this builds fine. Build drivers/net/mlx5 CC mlx5.o PMDINFO mlx5.o.pmd.c CC mlx5.o.pmd.o LD mlx5.o CC mlx5_glue.o CC mlx5_rxq.o CC mlx5_txq.o CC mlx5_rxtx.o CC mlx5_rxtx_vec.o CC mlx5_trigger.o CC mlx5_ethdev.o CC mlx5_mac.o CC mlx5_rxmode.o CC mlx5_vlan.o CC mlx5_stats.o CC mlx5_rss.o CC mlx5_mr.o CC mlx5_flow.o CC mlx5_socket.o AR librte_pmd_mlx5.a INSTALL-LIB librte_pmd_mlx5.a I feel I am missing some trivial step in vpp build process please help me out I am new to vpp. Let me know if you need any more infor to debug this issue. Thank you Sirshak Das
