Hi, I followed Dave Barach’s instructions as mentioned in one of the posts, To
use the built-in leakfinder: build TAG=vpp_debug, set #define
MHEAP_HAVE_SMALL_OBJECT_CACHE to 0 in .../src/vppinfra/mheap_bootstrap.h. Then:
* Start vpp, configure it, and so forth. * “memory-trace on” * <do
something> * “show memory” After doing above steps, I see output like the
following. Am I missing any steps to get additional info in the following
traces? DBGvpp# show memoryThread 0 vpp_main16416 objects, 14810k of 16641k
used, 1445k free, 1432k reclaimed, 257k overhead, 1048572k capacity Bytes
Count Sample Traceback 1964 28 0x7f416e9c6f98 0x7f41af3967f5
0x7f41b0672dd1
0x7f41b067317e 0x7f41b0673e11
0x7f41b068179a 0x7f41b040876c
1908 1 0x7f416f63c154 0x7f41af3967f5
0x7f41af366a4c 0x7f41af369791
0x7f41af354b89 0x7f41af354ca7
0x7f41b03f3f96
0x7f41b03f438e 0x7f41b03f3bbb
0x7f41b03f3ad8 0x7f41b03f3e47
0x7f41b043beec
0x7f41b043c9ee43 total traced objects Thanks for any help. -harish
_______________________________________________
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
