Hi guys，
I have tried every configuration I can guess. The sr mpls still not effective
on my vpp.
Can you give me an effective configuration, or can you help figure out the
error in my configuration?
PE1 - P - PE2
PE1 configuration:
create host-interface name eth4 mac 00:0c:29:4d:af:b5
create host-interface name eth2 mac 00:0c:29:4d:af:a1
set interface state host-eth2 up
set interface state host-eth4 up
set interface ip table host-eth4 1
set interface ip address host-eth2 14.1.1.1/24
set interface ip address host-eth4 21.1.1.1/24
create mpls tunnel out-label 33 out-label 53 via 14.1.1.2 host-eth2
set interface state mpls-tunnel0 up
mpls table add 0
set interface mpls host-eth2 enable
ip route add 23.1.1.1/24 via interface mpls-tunnel0 table 1
mpls local-label add eos 1053 ip4-lookup-in-table 1
mpls local-label add non-eos 1060 mpls-lookup-in-table 0
PE2 configuration:
create host-interface name eth3 mac 00:0c:29:19:8e:76
create host-interface name eth5 mac 00:0c:29:19:8e:8a
set interface state host-eth3 up
set interface state host-eth5 up
set interface ip address host-eth3 12.1.1.2/24
set interface ip table host-eth5 1
set interface ip address host-eth5 23.1.1.1/24
mpls table add 0
mpls table add 1
mpls local-label add non-eos 60 mpls-lookup-in-table 0
mpls local-label add eos 53 ip4-lookup-in-table 1
set interface mpls host-eth5 enable
set interface mpls host-eth3 enable
create mpls tunnel out-label 1023 out-label 1053 via 12.1.1.1 host-eth3
set interface state mpls-tunnel0 up
ip route add 21.1.1.0/24 via interface mpls-tunnel0 table 1
P configuration:
(only modify the configuration on P)
1. drop packet.(when decap outer label,can't encap outer label) the
configuration and trace is following:
create host-interface name eth2 mac 00:0c:29:0f:e2:a8
create host-interface name eth3 mac 00:0c:29:0f:e2:b2
set interface state host-eth2 up
set interface state host-eth3 up
set interface ip address host-eth3 12.1.1.1/24
mpls table add 0
mpls table add 1
set interface mpls host-eth2 enable
set interface mpls host-eth3 enable
mpls local-label add non-eos 33 mpls-lookup-in-table 0
set interface ip address host-eth2 14.1.1.2/24
mpls local-label add eos 53 ip4-lookup-in-table 0
mpls local-label add eos 1053 ip4-lookup-in-table 0
mpls local-label add non-eos 1023 mpls-lookup-in-table 0
sr mpls policy add bsid 33 next 60
00:08:35:510564: af-packet-input
af_packet: hw_if_index 1 next-index 4
tpacket2_hdr:
status 0x20000001 len 86 snaplen 86 mac 66 net 80
sec 0x5a1cbe94 nsec 0x1ea50e69 vlan 0
00:08:35:510591: ethernet-input
MPLS: 00:0c:29:4d:af:a1 -> 00:0c:29:0f:e2:a8
00:08:35:510650: mpls-input
MPLS: next mpls-lookup[1] label 33 ttl 255
00:08:35:510657: mpls-lookup
MPLS: next [0], lookup fib index 0, LB index 26 hash 0 label 33 eos 0
00:08:35:510666: error-drop
mpls-input: MPLS DROP DPO
2.replace 'sr mpls policy add bsid 33 next 60' with 'sr mpls policy add bsid
4001 next 60'. the trace info is following:
00:15:38:655991: af-packet-input
af_packet: hw_if_index 1 next-index 4
tpacket2_hdr:
status 0x20000001 len 86 snaplen 86 mac 66 net 80
sec 0x5a1cc03b nsec 0x1225fbd8 vlan 0
00:15:38:656023: ethernet-input
MPLS: 00:0c:29:4d:af:a1 -> 00:0c:29:0f:e2:a8
00:15:38:656089: mpls-input
MPLS: next mpls-lookup[1] label 33 ttl 255
00:15:38:656100: mpls-lookup
MPLS: next [6], lookup fib index 0, LB index 26 hash 0 label 33 eos 0
00:15:38:656130: lookup-mpls-dst
fib-index:0 hdr:[53:255:0:eos] load-balance:31
00:15:38:656137: ip4-mpls-label-disposition
disp:0
00:15:38:656144: lookup-ip4-dst
fib-index:0 addr:23.1.1.5 load-balance:1
00:15:38:656151: ip4-drop
ICMP: 21.1.1.5 -> 23.1.1.5
tos 0x00, ttl 63, length 64, checksum 0x4db1
fragment id 0x0001
ICMP echo_request checksum 0x5f5d
00:15:38:656160: error-drop
ip4-mpls-label-disposition: valid ip4 packets
3.add the mpls tunnel configuration, remove static routing configuration, the
configuration and trace is following:
create host-interface name eth2 mac 00:0c:29:0f:e2:a8
create host-interface name eth3 mac 00:0c:29:0f:e2:b2
set interface state host-eth2 up
set interface state host-eth3 up
set interface ip address host-eth3 12.1.1.1/24
mpls table add 0
mpls table add 1
set interface mpls host-eth2 enable
set interface mpls host-eth3 enable
mpls local-label add non-eos 33 mpls-lookup-in-table 0
set interface ip address host-eth2 14.1.1.2/24
mpls local-label add eos 53 ip4-lookup-in-table 0
mpls local-label add eos 1053 ip4-lookup-in-table 0
mpls local-label add non-eos 1023 mpls-lookup-in-table 0
sr mpls policy add bsid 4001 next 60
create mpls tunnel out-label 60 out-label 53 via 12.1.1.2 host-eth3
set interface state mpls-tunnel0 up
00:05:36:319144: af-packet-input
af_packet: hw_if_index 1 next-index 4
tpacket2_hdr:
status 0x20000001 len 86 snaplen 86 mac 66 net 80
sec 0x5a1cfd63 nsec 0x1dabd081 vlan 0
00:05:36:319169: ethernet-input
MPLS: 00:0c:29:4d:af:a1 -> 00:0c:29:0f:e2:a8
00:05:36:319225: mpls-input
MPLS: next mpls-lookup[1] label 33 ttl 255
00:05:36:319231: mpls-lookup
MPLS: next [6], lookup fib index 0, LB index 26 hash 0 label 33 eos 0
00:05:36:319238: lookup-mpls-dst
fib-index:0 hdr:[53:255:0:eos] load-balance:31
00:05:36:319243: ip4-mpls-label-disposition
disp:0
00:05:36:319249: lookup-ip4-dst
fib-index:0 addr:23.1.1.5 load-balance:1
00:05:36:319254: ip4-drop
ICMP: 21.1.1.5 -> 23.1.1.5
tos 0x00, ttl 63, length 64, checksum 0x4db1
fragment id 0x0001
ICMP echo_request checksum 0x5f5d
00:05:36:319260: error-drop
ip4-mpls-label-disposition: valid ip4 packets
4.only decap the outer label, enable mpls tunnel only one label:
create host-interface name eth2 mac 00:0c:29:0f:e2:a8
create host-interface name eth3 mac 00:0c:29:0f:e2:b2
set interface state host-eth2 up
set interface state host-eth3 up
set interface ip address host-eth3 12.1.1.1/24
mpls table add 0
mpls table add 1
set interface mpls host-eth2 enable
set interface mpls host-eth3 enable
mpls local-label add non-eos 33 mpls-lookup-in-table 0
set interface ip address host-eth2 14.1.1.2/24
create mpls tunnel out-label 60 via 12.1.1.2 host-eth3
sr mpls policy add bsid 4001 next 60
set interface state mpls-tunnel0 up
00:06:13:222299: af-packet-input
af_packet: hw_if_index 1 next-index 4
tpacket2_hdr:
status 0x20000001 len 86 snaplen 86 mac 66 net 80
sec 0x5a1cce7a nsec 0x228cce67 vlan 0
00:06:13:222341: ethernet-input
MPLS: 00:0c:29:4d:af:a1 -> 00:0c:29:0f:e2:a8
00:06:13:222441: mpls-input
MPLS: next mpls-lookup[1] label 33 ttl 255
00:06:13:222456: mpls-lookup
MPLS: next [6], lookup fib index 0, LB index 26 hash 0 label 33 eos 0
00:06:13:222471: lookup-mpls-dst
fib-index:0 hdr:[53:255:0:eos] load-balance:13
00:06:13:222485: error-drop
mpls-input: MPLS DROP DPO
Thanks,
xyxue
_______________________________________________
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
