Hello VPP gurus,
now i try to find JVPP equivalent to VPP CLI command
>>>vppctl mpls local-label add non-eos 2003 mpls-lookup-in-table 0
If I do it via CLI I get from VPP (show mpls fib) following output [1]
If I prepare MplsRouteAddDel object as follows:
mplsRouteDTO.mrIsAdd = 1;
mplsRouteDTO.mrLabel = 2003;
and send it through JVPP method mplsRouteAddDel then output in VPP looks
like[2].
I tried many other additional parameters for mplsRouteDTO but I am not able to
find correct set of attributes to get the output [1].
[1]
>>>>>>>>>
2003:neos/21 fib:0 index:17 locks:2
src:CLI refs:1
index:21 locks:2 flags:shared, uPRF-list:8 len:0 itfs:[]
index:21 pl-index:21 MPLS weight=1 deag: oper-flags:resolved,
[@0]: dst-address,unicast lookup in MPLS-VRF:0
forwarding: mpls-neos-chain
[@0]: dpo-load-balance: [proto:mpls index:20 buckets:1 uRPF:8 to:[0:0]]
[0] [@6]: dst-address,unicast lookup in MPLS-VRF:0
<<<<<<<<<<
[2]
>>>>>>>
2003:neos/21 fib:0 index:17 locks:2
src:API refs:1 flags:attached,
index:21 locks:2 flags:shared, uPRF-list:8 len:1 itfs:[0, ]
index:21 pl-index:21 MPLS weight=1 attached-nexthop: cfg-flags:attached,
d307::300:0:0:0 local0
[@0]: mpls via 0.0.0.0 local0:
forwarding: mpls-neos-chain
[@0]: dpo-load-balance: [proto:mpls index:20 buckets:1 uRPF:8 to:[0:0]]
[0] [@0]: dpo-drop mpls
<<<<<<<<<
Jozef Glončák
Pantheon Technologies, s. r. o.
________________________________
From: Neale Ranns (nranns) <nra...@cisco.com>
Sent: Tuesday, September 12, 2017 13:58
To: Jozef Glončák; vpp-dev@lists.fd.io
Subject: Re: [vpp-dev] JVPP API for adding MPLS local label
CLI: sh mpls fib
API: mpls_fib_dump
/neale
From: Jozef Glončák <jozef.glon...@pantheon.tech>
Date: Tuesday, 12 September 2017 at 11:16
To: "Neale Ranns (nranns)" <nra...@cisco.com>, "vpp-dev@lists.fd.io"
<vpp-dev@lists.fd.io>
Subject: Re: [vpp-dev] JVPP API for adding MPLS local label
Thank you for response.
And is there any >>show<< command in VPP through which I can see that local
label was configured?
Jozef Glončák
Pantheon Technologies, s. r. o.
________________________________
From: Neale Ranns (nranns) <nra...@cisco.com>
Sent: Monday, September 11, 2017 19:21
To: Jozef Glončák; vpp-dev@lists.fd.io
Subject: Re: [vpp-dev] JVPP API for adding MPLS local label
Hi Jozef,
It’s mpls_route_add_del
Regards,
neale
From: <vpp-dev-boun...@lists.fd.io> on behalf of Jozef Glončák
<jozef.glon...@pantheon.tech>
Date: Monday, 11 September 2017 at 13:48
To: "vpp-dev@lists.fd.io" <vpp-dev@lists.fd.io>
Subject: [vpp-dev] JVPP API for adding MPLS local label
Hello developers,
I would like substitude this VPP CLI command
mpls local-label add eos 101 ip4-lookup-in-table 1
with JVPP API call, but I am not able to find equivalent.
Is it possible?
Jozef Glončák
Pantheon Technologies, s. r. o.
_______________________________________________
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
