Any inputs on this is appreciated Thanks,
Pragash Vijayaragavan Grad Student at Rochester Institute of Technology email : pxv3...@rit.edu ph : 585 764 4662 On Thu, Sep 21, 2017 at 4:50 PM, Pragash Vijayaragavan <pxv3...@g.rit.edu> wrote: > Hi Guys, > > We are working on ipv6 lookup rate in VPP. > > We are sending traffic from TRex and receiving on the same machine, with > VPP as the SUT. > > The problem is that lookup rate of ip6 is very low, we are only getting a > lookup rate of 200 Kpps, there are lot of drops. (ip4 has a rate of 5 Mpps). > > Is there any special configuration / requirement for doing the ip6 lookup > in the VPP faster. We tried increasing the heapsize, using multiple cores.. > > Our topology : > > --- | TRex port 1 | ------------------------ | VPP > port 1 | > ----| port 2 | ------------------------| VPP > port 2 | > > Note : we have default routes in VPP, (so that there are no drops). > > Thanks, > > Pragash Vijayaragavan > Grad Student at Rochester Institute of Technology > email : pxv3...@rit.edu > ph : 585 764 4662 <(585)%20764-4662> > >
_______________________________________________ vpp-dev mailing list vpp-dev@lists.fd.io https://lists.fd.io/mailman/listinfo/vpp-dev
