Thanks a lot Sergio for lot of patience and help,
With you latest comments, I can see dpdk IPSec is happening.
There are some issues, I am getting where post decryption ip4-input is not
called.
As such I have kept config of IPSec same as was when working with VPP core
IPSec.
I need to dig further, as such it seems packet is getting dropped in
dpdk-esp-decrypt().
Is there some way to find out some errors related.
I am using vpp v17.10 and DPDK 17.05.0
Currently trace is looking like below:
00:01:30:013871: dpdk-input
GigabitEthernet0/8/0 rx queue 0
buffer 0x4d67: current data 14, length 136, free-list 0, clone-count 0,
totlen-nifb 0, trace 0x0
PKT MBUF: port 0, nb_segs 1, pkt_len 150
buf_len 2176, data_len 150, ol_flags 0x0, data_off 128, phys_addr 0x9cd35a00
packet_type 0x0
IP4: 08:00:27:ba:35:60 -> 08:00:27:67:d4:f0
IPSEC_ESP: 172.28.128.4 -> 172.28.128.5
tos 0x00, ttl 64, length 136, checksum 0x9d0f
fragment id 0x44f2, flags DONT_FRAGMENT
00:01:30:013902: ip4-input
IPSEC_ESP: 172.28.128.4 -> 172.28.128.5
tos 0x00, ttl 64, length 136, checksum 0x9d0f
fragment id 0x44f2, flags DONT_FRAGMENT
00:01:30:013909: ipsec-input-ip4
esp: sa_id 20 spi 1000 seq 7
00:01:30:013911: dpdk-esp-decrypt
esp: crypto aes-cbc-128 integrity sha1-96
Earlier when I was using VPP core IPSec, trace was looking like
00:03:41:528507: dpdk-input
GigabitEthernet0/8/0 rx queue 0
buffer 0x4d19: current data 14, length 136, free-list 0, clone-count 0,
totlen-nifb 0, trace 0x0
PKT MBUF: port 0, nb_segs 1, pkt_len 150
buf_len 2176, data_len 150, ol_flags 0x0, data_off 128, phys_addr 0x7de34680
packet_type 0x0
IP4: 08:00:27:ba:35:60 -> 08:00:27:67:d4:f0
IPSEC_ESP: 172.28.128.4 -> 172.28.128.5
tos 0x00, ttl 64, length 136, checksum 0xc1c0
fragment id 0x2041, flags DONT_FRAGMENT
00:03:41:528548: ip4-input
IPSEC_ESP: 172.28.128.4 -> 172.28.128.5
tos 0x00, ttl 64, length 136, checksum 0xc1c0
fragment id 0x2041, flags DONT_FRAGMENT
00:03:41:528556: ipsec-input-ip4
esp: sa_id 20 spi 1000 seq 1
00:03:41:528559: esp-decrypt
esp: crypto aes-cbc-128 integrity sha1-96
00:03:41:528648: ip4-input
ICMP: 172.28.128.4 -> 172.28.128.5
tos 0x00, ttl 64, length 84, checksum 0x2267
fragment id 0x0000
ICMP echo_request checksum 0x4201
00:03:41:528649: ip4-lookup
fib 0 dpo-idx 6 flow hash: 0x00000000
ICMP: 172.28.128.4 -> 172.28.128.5
tos 0x00, ttl 64, length 84, checksum 0x2267
fragment id 0x0000
ICMP echo_request checksum 0x4201
00:03:41:528680: ip4-local
ICMP: 172.28.128.4 -> 172.28.128.5
tos 0x00, ttl 64, length 84, checksum 0x2267
fragment id 0x0000
ICMP echo_request checksum 0x4201
00:03:41:528684: ip4-icmp-input
ICMP: 172.28.128.4 -> 172.28.128.5
tos 0x00, ttl 64, length 84, checksum 0x2267
fragment id 0x0000
ICMP echo_request checksum 0x4201
00:03:41:528685: ip4-icmp-echo-request
ICMP: 172.28.128.4 -> 172.28.128.5
tos 0x00, ttl 64, length 84, checksum 0x2267
fragment id 0x0000
ICMP echo_request checksum 0x4201
00:03:41:528686: ip4-load-balance
fib 0 dpo-idx 13 flow hash: 0x00000000
ICMP: 172.28.128.5 -> 172.28.128.4
tos 0x00, ttl 64, length 84, checksum 0xea0f
fragment id 0x3857
ICMP echo_reply checksum 0x4a01
00:03:41:528688: ip4-rewrite
tx_sw_if_index 1 dpo-idx 1 : ipv4 via 172.28.128.4 GigabitEthernet0/8/0:
080027ba356008002767d4f00800 flow hash: 0x00000000
00000000: 080027ba356008002767d4f0080045000054385700004001ea0fac1c8005ac1c
00000020: 800400004a0107850001d6be8e5900000000898d0100000000001011
00:03:41:528691: ipsec-output-ip4
spd 1
00:03:41:528697: esp-encrypt
esp: spi 1001 seq 0 crypto aes-cbc-128 integrity sha1-96
My configuration is as below:
sudo ifconfig enp0s8 down
sudo service vpp restart
set int ip address GigabitEthernet0/8/0 172.28.128.5/24
set int state GigabitEthernet0/8/0 up
ipsec sa add 10 spi 1001 esp crypto-alg aes-cbc-128 crypto-key
4a506a794f574265564551694d653768 integ-alg sha1-96 integ-key
4339314b55523947594d6d3547666b45764e6a58
ipsec sa add 20 spi 1000 esp crypto-alg aes-cbc-128 crypto-key
4a506a794f574265564551694d653768 integ-alg sha1-96 integ-key
4339314b55523947594d6d3547666b45764e6a58
ipsec spd add 1
set interface ipsec spd GigabitEthernet0/8/0 1
ipsec policy add spd 1 priority 100 inbound action bypass protocol 50
ipsec policy add spd 1 priority 100 outbound action bypass protocol 50
ipsec policy add spd 1 priority 10 inbound action protect sa 20 local-ip-range
172.28.128.5 - 172.28.128.5 remote-ip-range 172.28.128.4 - 172.28.128.4
ipsec policy add spd 1 priority 10 outbound action protect sa 10 local-ip-range
172.28.128.5 - 172.28.128.5 remote-ip-range 172.28.128.4 - 172.28.128.4
dpdk {
socket-mem 1024,1024
num-mbufs 131072
dev 0000:00:08.0
vdev crypto_aesni_mb0
vdev crypto_aesni_mb1
}
I think there shall be no change in config when using DPDK IPSec vs VPP Core
IPSec.
With above config, I was able to ping over ESP properly when not using DPDK
IPSec.
Thanks,
Sergio
_______________________________________________
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
