Hi, I'm adding a label using the following command:
ip route add 10.100.2.0/24 table 1 via 10.100.4.12 GigabitEthernet0/6/0 out-label 222 And on the receiving side poping it with: set interface mpls GigabitEthernet0/6/0 enable mpls local-label 222 ip4-lookup-in-table 1 However, this didn't work until I added "*add eos*" to the last command, i.e., the following worked: mpls local-label add eos 222 ip4-lookup-in-table 1 Why is it necessary to specify "*add eos*" at the receiving side? Or maybe my configuration of the sender's side is wrong? Thanks, Michael.
_______________________________________________ vpp-dev mailing list vpp-dev@lists.fd.io https://lists.fd.io/mailman/listinfo/vpp-dev
