Dear Ole,
In order to avoid problems with vagrant, I installed VPP on ubuntu server
16.04.
I start vpp with the command! $ sudo vpp unix interactive.
After configuring correctly the interface I do $ set punt udp 1111 in order
to accept UDP traffic on the port 1111.
When I send 1 UDP packet I see the following trace:
"
vpp# show trace
------------------- Start of thread 0 vpp_main -------------------
Packet 1
00:00:49:978247: dpdk-input
GigabitEthernet0/9/0 rx queue 0
buffer 0x4db5: current data 14, length 46, free-list 0, clone-count 0,
totlen-nifb 0, trace 0x0
PKT MBUF: port 0, nb_segs 1, pkt_len 60
buf_len 2176, data_len 60, ol_flags 0x0, data_off 128, phys_addr
0x8ec36d80
packet_type 0x0
IP4: 08:00:27:42:3e:65 -> 08:00:27:93:9a:be
UDP: 172.28.128.6 -> 172.28.128.5
tos 0x00, ttl 64, length 35, checksum 0x49dc
fragment id 0x98a9, flags DONT_FRAGMENT
UDP: 47743 -> 1111
length 15, checksum 0x8a50
00:00:49:978287: ip4-input
UDP: 172.28.128.6 -> 172.28.128.5
tos 0x00, ttl 64, length 35, checksum 0x49dc
fragment id 0x98a9, flags DONT_FRAGMENT
UDP: 47743 -> 1111
length 15, checksum 0x8a50
00:00:49:978292: ip4-lookup
fib 0 dpo-idx 6 flow hash: 0x00000000
UDP: 172.28.128.6 -> 172.28.128.5
tos 0x00, ttl 64, length 35, checksum 0x49dc
fragment id 0x98a9, flags DONT_FRAGMENT
UDP: 47743 -> 1111
length 15, checksum 0x8a50
00:00:49:978297: ip4-local
UDP: 172.28.128.6 -> 172.28.128.5
tos 0x00, ttl 64, length 35, checksum 0x49dc
fragment id 0x98a9, flags DONT_FRAGMENT
UDP: 47743 -> 1111
length 15, checksum 0x8a50
00:00:49:978299: ip4-udp-lookup
UDP: src-port 47743 dst-port 1111
00:00:49:978302: error-punt
ip4-udp-punt: udp port punt
"
which to me looks like the UDP traffic has been correctly received.
My goal is to modify your code, which is at $TOPDIR/vpp/src/vnet/ip/punt.c,
in order to start and understand how to deploy new code with VPP.
I inserted several clib_warning("I am here") in the code. Then I run
$TOPDIR/vpp make build-release to compile the new code. However, even if I
am pretty sure the your code runs because of the trace above, I cannot see
any output in /var/log/syslog as suggested by Chris nor in the console (I
run with unix interactive).
Do you have any idea why I cannot see any message in the log and/or how I
can modify/debug your code with some prints and look at them somewhere?
Thanks for the help.
Best regards,
Alessio
On Fri, Jun 2, 2017 at 4:48 PM, <[email protected]> wrote:
> Alessio,
>
> Run in the foreground with unix { interactive }.
> And directly from a the build directory.
> The vagrant stuff is mostly useful for demo and first look. Sounds like
> you really want to do some development.
>
> Cheers,
> Ole
>
> > On 2 Jun 2017, at 13:31, Alessio Silvestro <[email protected]>
> wrote:
> >
> > I am running the vagrant machine provided, so I run on Ubuntu 16.04.02
> TLS.
> >
> > I tried clib_warning(), clib_unix_warning(), clib_error() and
> clib_unix_error().
> >
> > I inserted that line in both vvp/src/vnet/ip/punt.c and
> vpp/src/vnet/ip/ip4_forward.c in order to be sure that the packet was
> actually reaching the node.
> >
> > However, there is no sign in /var/log/syslog or anywhere else I can
> think of about that message
> >
> > Are you sure there is no other place where they can be printed?
> >
> > Thanks for the cooperation,
> > Alessio
> >
> > On Thu, Jun 1, 2017 at 7:26 PM, John Lo (loj) <[email protected]> wrote:
> > The output of clib_warning() call should be in the syslog. If running
> vpp in Ubuntu, take a look in /var/log/syslog. -John
> >
> >
> >
> > From: [email protected] [mailto:[email protected]]
> On Behalf Of Alessio Silvestro
> > Sent: Thursday, June 01, 2017 12:11 PM
> > To: Luke, Chris <[email protected]>
> > Cc: [email protected]
> > Subject: Re: [vpp-dev] VPP Node Debug
> >
> >
> >
> > I knew VPP run in user space and that printk is not the best option,
> however from the documentation it is not clear to me how to do that.
> >
> >
> >
> > For example now I inserted the command clib_warning("I am here!") in the
> node I create -- that from vppctl show trace I can see processes the
> packets.
> >
> >
> >
> > Where does it prints?
> >
> >
> >
> > Still I cannot figure it out.
> >
> >
> >
> > Thanks,
> >
> > Alessio
> >
> >
> >
> > On Thu, Jun 1, 2017 at 6:00 PM, Luke, Chris <[email protected]>
> wrote:
> >
> > printk() is typically a kernel thing, no? This isn’t kernel code. 😊
> >
> >
> >
> > If you just want stuff on the console when running in a debugger, or
> interactively, clib_warning() may be what you are looking for.
> >
> >
> >
> > Chris.
> >
> >
> >
> >
> >
> > From: [email protected] [mailto:[email protected]]
> On Behalf Of Alessio Silvestro
> > Sent: Thursday, June 1, 2017 10:35
> > To: [email protected]
> > Subject: [vpp-dev] VPP Node Debug
> >
> >
> >
> > Hi all,
> >
> >
> >
> > I am using this code "https://gerrit.fd.io/r/#/c/6721/" to in order to
> enable an external process to receive UDP packets.
> >
> >
> >
> > I tried to use printk -- including module.h in the c file.
> >
> >
> >
> > When I compile VPP with:
> >
> >
> >
> > TOPDIR/vpp make build-release
> >
> >
> >
> > I got the following error
> >
> >
> >
> > fatal error: linux/module.h: No such file or directory
> >
> > compilation terminated.
> >
> >
> >
> > Do you have any idea why?
> >
> >
> >
> > Is there a better way to debug the code of a node in VPP?
> >
> >
> >
> > Thanks,
> >
> > Alessio
> >
> >
> >
> >
> > _______________________________________________
> > vpp-dev mailing list
> > [email protected]
> > https://lists.fd.io/mailman/listinfo/vpp-dev
>
>
_______________________________________________
vpp-dev mailing list
[email protected]
https://lists.fd.io/mailman/listinfo/vpp-dev