Hi Neale, I'm sorry. The previous display was caused by my error configuration.The display after change configuration is shown below: DBGvpp# Name Idx State Counter Count local0 0 down mpls-tunnel0 3 up rx packets 21792 tx packets 2484288
Thanks, xyxue From: Neale Ranns (nranns) Date: 2017-05-31 15:14 To: 薛欣颖; vpp-dev@lists.fd.io Subject: Re: [vpp-dev] The count information on virtual interface Hi Xyxue, MPLS tunnels (and all other tunnels/virtual interfaces) should accumulate stats. Are you seeing no stats when the MPLS tunnel is carrying L2 or L3 traffic? Regards, neale From: <vpp-dev-boun...@lists.fd.io> on behalf of 薛欣颖 <xy...@fiberhome.com> Date: Wednesday, 31 May 2017 at 07:28 To: "vpp-dev@lists.fd.io" <vpp-dev@lists.fd.io> Subject: [vpp-dev] The count information on virtual interface Hi guys, Whether VPP collect count information on virtual interfaces? I can only see the count information on virtual interfaces associated with VLAN.Some infomation is shown below: vpp# show int Name Idx State Counter Count local0 0 down vxlan_tunnel0 5 up rx packets 39 rx bytes 13489 tx packets 43 tx bytes 15277 DBGvpp# Name Idx State Counter Count local0 0 down mpls-tunnel0 3 up Do other virtual interfaces support the count information? Thanks, xyxue
_______________________________________________ vpp-dev mailing list vpp-dev@lists.fd.io https://lists.fd.io/mailman/listinfo/vpp-dev