Well, I get several failures. Fedora 25. I don't know if this is a valid
choice or not. I did "make wipe-release" followed by "make test-all".
Burt
==============================================================================
ERROR: MPLS eBGP PIC edge convergence
------------------------------------------------------------------------------
Traceback (most recent call last):
File "/home/burts/vpp/test/test_mpls.py", line 1287, in test_mpls_ebgp_pic
rx0 = self.pg3.get_capture(len(pkts))
File "/home/burts/vpp/test/vpp_pg_interface.py", line 240, in get_capture
(len(capture.res), expected_count, name))
Exception: Captured packets mismatch, captured 32 packets, expected 64
packets on pg3
==============================================================================
FAIL: create/modify/delete IPv4 BFD UDP session
------------------------------------------------------------------------------
Traceback (most recent call last):
File "/home/burts/vpp/test/test_bfd.py", line 2321, in
test_add_mod_del_bfd_udp
self.cli_verify_no_response(cli_add_cmd)
File "/home/burts/vpp/test/test_bfd.py", line 2212, in
cli_verify_no_response
"CLI command response")
File "/home/burts/vpp/test/framework.py", line 634, in assert_equal
self.assertEqual(real_value, expected_value, msg)
AssertionError: Invalid CLI command response: bfd udp session add: Required
parameter `interface' missing.
does not match expected value
==============================================================================
FAIL: create/modify/delete IPv6 BFD UDP session
------------------------------------------------------------------------------
Traceback (most recent call last):
File "/home/burts/vpp/test/test_bfd.py", line 2362, in
test_add_mod_del_bfd_udp6
self.cli_verify_no_response(cli_add_cmd)
File "/home/burts/vpp/test/test_bfd.py", line 2212, in
cli_verify_no_response
"CLI command response")
File "/home/burts/vpp/test/framework.py", line 634, in assert_equal
self.assertEqual(real_value, expected_value, msg)
AssertionError: Invalid CLI command response: bfd udp session add: Required
parameter `interface' missing.
does not match expected value
==============================================================================
FAIL: create/modify/delete IPv6 BFD UDP session (authenticated)
------------------------------------------------------------------------------
Traceback (most recent call last):
File "/home/burts/vpp/test/test_bfd.py", line 2452, in
test_add_mod_del_bfd_udp6_auth
self.cli_verify_no_response(cli_add_cmd)
File "/home/burts/vpp/test/test_bfd.py", line 2212, in
cli_verify_no_response
"CLI command response")
File "/home/burts/vpp/test/framework.py", line 634, in assert_equal
self.assertEqual(real_value, expected_value, msg)
AssertionError: Invalid CLI command response: bfd udp session add: Required
parameter `interface' missing.
does not match expected value
==============================================================================
FAIL: create/modify/delete IPv4 BFD UDP session (authenticated)
------------------------------------------------------------------------------
Traceback (most recent call last):
File "/home/burts/vpp/test/test_bfd.py", line 2406, in
test_add_mod_del_bfd_udp_auth
self.cli_verify_no_response(cli_add_cmd)
File "/home/burts/vpp/test/test_bfd.py", line 2212, in
cli_verify_no_response
"CLI command response")
File "/home/burts/vpp/test/framework.py", line 634, in assert_equal
self.assertEqual(real_value, expected_value, msg)
AssertionError: Invalid CLI command response: bfd udp session add: Required
parameter `interface' missing.
does not match expected value
==============================================================================
FAIL: put session admin-up and admin-down
------------------------------------------------------------------------------
Traceback (most recent call last):
File "/home/burts/vpp/test/test_bfd.py", line 2549, in test_admin_up_down
self.cli_verify_no_response(cli_down)
File "/home/burts/vpp/test/test_bfd.py", line 2212, in
cli_verify_no_response
"CLI command response")
File "/home/burts/vpp/test/framework.py", line 634, in assert_equal
self.assertEqual(real_value, expected_value, msg)
AssertionError: Invalid CLI command response: bfd udp session set-flags:
Required parameter `interface' missing.
does not match expected value
==============================================================================
FAIL: turn authentication on and off
------------------------------------------------------------------------------
Traceback (most recent call last):
File "/home/burts/vpp/test/test_bfd.py", line 2497, in test_auth_on_off
self.cli_verify_no_response(cli_activate)
File "/home/burts/vpp/test/test_bfd.py", line 2212, in
cli_verify_no_response
"CLI command response")
File "/home/burts/vpp/test/framework.py", line 634, in assert_equal
self.assertEqual(real_value, expected_value, msg)
AssertionError: Invalid CLI command response: bfd udp session auth
activate: Required parameter `interface' missing.
does not match expected value
==============================================================================
FAIL: turn authentication on and off (delayed)
------------------------------------------------------------------------------
Traceback (most recent call last):
File "/home/burts/vpp/test/test_bfd.py", line 2524, in
test_auth_on_off_delayed
self.cli_verify_no_response(cli_activate)
File "/home/burts/vpp/test/test_bfd.py", line 2212, in
cli_verify_no_response
"CLI command response")
File "/home/burts/vpp/test/framework.py", line 634, in assert_equal
self.assertEqual(real_value, expected_value, msg)
AssertionError: Invalid CLI command response: bfd udp session auth
activate: Required parameter `interface' missing.
does not match expected value
==============================================================================
FAIL: set/del udp echo source
------------------------------------------------------------------------------
Traceback (most recent call last):
File "/home/burts/vpp/test/test_bfd.py", line 2562, in
test_set_del_udp_echo_source
self.cli_verify_no_response(cli_set)
File "/home/burts/vpp/test/test_bfd.py", line 2212, in
cli_verify_no_response
"CLI command response")
File "/home/burts/vpp/test/framework.py", line 634, in assert_equal
self.assertEqual(real_value, expected_value, msg)
AssertionError: Invalid CLI command response: bfd udp echo-source set:
Required parameter `interface' missing.
does not match expected value
Ran 274 tests in 643.291s
FAILED (failures=8, errors=1, skipped=6)
Makefile:100: recipe for target 'test' failed
make[1]: *** [test] Error 1
make[1]: Leaving directory '/home/burts/vpp/test'
Makefile:285: recipe for target 'test-all' failed
make: *** [test-all] Error 2
[burts@localhost vpp]$
On Mon, May 22, 2017 at 10:05 PM, Burt Silverman <bur...@gmail.com> wrote:
>
> I tried running locally Fedora 25 (my Centos was on my T400 laptop which
> is too old to run the tests because it is missing SSE4.2.)
>
> I believe that typically a "make test" should not depend upon installed
> code. But I had to uninstall an old vpp-plugins package. It was obvious
> because they were calling os_get_cpu_number and failing on that. I cannot
> imagine how it could be correct for make test to test code from two
> different locations, depending on what is installed or not installed.
>
> After that I still had a test failure running make test.
>
> ============================================================
> ==================
> ERROR: MPLS eBGP PIC edge convergence
> ------------------------------------------------------------
> ------------------
> Traceback (most recent call last):
> File "/home/burts/vpp/test/test_mpls.py", line 1287, in
> test_mpls_ebgp_pic
> rx0 = self.pg3.get_capture(len(pkts))
> File "/home/burts/vpp/test/vpp_pg_interface.py", line 240, in
> get_capture
> (len(capture.res), expected_count, name))
> Exception: Captured packets mismatch, captured 32 packets, expected 64
> packets on pg3
>
> Ran 274 tests in 427.000s
>
> FAILED (errors=1, skipped=85)
>
> I will try make test-all soon.
>
> Burt
>
_______________________________________________
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
