Hi Neale, I fixed the issue with the IP addresses, but the problem remains. In trace is vat# ------------------- Start of thread 0 vpp_main ------------------- No packets in trace buffer
The VIRL topology links are connected via linux bridges, and it seems like it doesn’t forward tagged frames. It is probably not issue related to VPP. Thanks, M. From: Neale Ranns (nranns) Sent: 6. marca 2017 17:07 To: Matej Klotton -X (mklotton - PANTHEON TECHNOLOGIES at Cisco) <mklot...@cisco.com>; vpp-dev@lists.fd.io Cc: csit-...@lists.fd.io Subject: Re: [csit-dev] VPP receive no tagged packet on Virtio interface Hi Matej, Your IP addresses are configured on the same interface; sw_if_index 6. Sw_if_index 5 thus will not accept IP packets. /neale From: <csit-dev-boun...@lists.fd.io<mailto:csit-dev-boun...@lists.fd.io>> on behalf of "Matej Klotton -X (mklotton - PANTHEON TECHNOLOGIES at Cisco)" <mklot...@cisco.com<mailto:mklot...@cisco.com>> Date: Monday, 6 March 2017 at 14:58 To: "vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io>" <vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io>> Cc: "csit-...@lists.fd.io<mailto:csit-...@lists.fd.io>" <csit-...@lists.fd.io<mailto:csit-...@lists.fd.io>> Subject: [csit-dev] VPP receive no tagged packet on Virtio interface Hi all, In CSIT we are running VPP on a VM with virtio network device. vppctl show hardware Name Idx Link Hardware GigabitEthernet0/4/0 1 up GigabitEthernet0/4/0 Ethernet address fa:16:3e:0a:3e:3d Red Hat Virtio carrier up full duplex speed 10000 mtu 9216 rx queues 1, rx desc 256, tx queues 1, tx desc 256 The interface is configured with 2 Dot1Q subinterfaces, with ip address on each subinterface. sw_interface_set_flags sw_if_index 1 admin-up create_vlan_subif sw_if_index 1 vlan 10 sw_interface_set_flags sw_if_index 5 admin-up create_vlan_subif sw_if_index 1 vlan 20 sw_interface_set_flags sw_if_index 6 admin-up sw_interface_add_del_address sw_if_index 6 192.168.100.1/24 sw_interface_add_del_address sw_if_index 6 192.168.200.1/24 ip_neighbor_add_del sw_if_index 5 dst 192.168.100.2 mac fa:16:3e:b1:67:b7 ip_neighbor_add_del sw_if_index 6 dst 192.168.200.2 mac fa:16:3e:b1:67:b7 In a testcase I’m sending tagged frame with tag 20 and I’m expecting received packed with tag 10 ###[ Ethernet ]### dst = fa:16:3e:0a:3e:3d src = fa:16:3e:b1:67:b7 type = n_802_1Q ###[ 802.1Q ]### prio = 0L id = 0L vlan = 10L type = IPv4 ###[ IP ]### version = 4L ihl = 5L tos = 0x0 len = 28 id = 1 flags = frag = 0L ttl = 64 proto = icmp chksum = 0xcd8a src = 192.168.100.2 dst = 192.168.200.2 \options \ ###[ ICMP ]### type = echo-request code = 0 chksum = 0xf7ff id = 0x0 seq = 0x0 But there is no packet received in vpp show trace vat# ------------------- Start of thread 0 vpp_main ------------------- No packets in trace buffer The same testcase with e1000 driver instead virtio has in trace Packet 1 00:00:18:038106: dpdk-input GigabitEthernet0/4/0 rx queue 0 buffer 0x4e51: current data 0, length 60, free-list 0, totlen-nifb 0, trace 0x0 PKT MBUF: port 0, nb_segs 1, pkt_len 60 buf_len 2176, data_len 60, ol_flags 0x0, data_off 128, phys_addr 0x53935340 packet_type 0x0 IP4: fa:16:3e:b1:67:b7 -> fa:16:3e:bc:bb:cd 802.1q vlan 10 ICMP: 192.168.100.2 -> 192.168.200.2 tos 0x00, ttl 64, length 28, checksum 0xcd8a fragment id 0x0001 ICMP echo_request checksum 0xf7ff 00:00:18:038164: ethernet-input IP4: fa:16:3e:b1:67:b7 -> fa:16:3e:bc:bb:cd 802.1q vlan 10 00:00:18:038174: ip4-input ICMP: 192.168.100.2 -> 192.168.200.2 tos 0x00, ttl 64, length 28, checksum 0xcd8a fragment id 0x0001 ICMP echo_request checksum 0xf7ff 00:00:18:038179: ip4-lookup fib 0 dpo-idx 5 flow hash: 0x00000000 ICMP: 192.168.100.2 -> 192.168.200.2 tos 0x00, ttl 64, length 28, checksum 0xcd8a fragment id 0x0001 ICMP echo_request checksum 0xf7ff 00:00:18:038185: ip4-rewrite tx_sw_if_index 6 dpo-idx 5 : ipv4 via 192.168.200.2 GigabitEthernet0/4/0.20: IP4: fa:16:3e:bc:bb:cd -> fa:16:3e:b1:67:b7 802.1q vlan 20 flow hash: 0x00000000 IP4: fa:16:3e:bc:bb:cd -> fa:16:3e:b1:67:b7 802.1q vlan 20 ICMP: 192.168.100.2 -> 192.168.200.2 tos 0x00, ttl 63, length 28, checksum 0xce8a fragment id 0x0001 ICMP echo_request checksum 0xf7ff 00:00:18:038188: GigabitEthernet0/4/0-output GigabitEthernet0/4/0.20 IP4: fa:16:3e:bc:bb:cd -> fa:16:3e:b1:67:b7 802.1q vlan 20 ICMP: 192.168.100.2 -> 192.168.200.2 tos 0x00, ttl 63, length 28, checksum 0xce8a fragment id 0x0001 ICMP echo_request checksum 0xf7ff 00:00:18:038194: GigabitEthernet0/4/0-tx GigabitEthernet0/4/0 tx queue 0 buffer 0x4e51: current data 0, length 60, free-list 0, totlen-nifb 0, trace 0x0 IP4: fa:16:3e:bc:bb:cd -> fa:16:3e:b1:67:b7 802.1q vlan 20 ICMP: 192.168.100.2 -> 192.168.200.2 tos 0x00, ttl 63, length 28, checksum 0xce8a fragment id 0x0001 ICMP echo_request checksum 0xf7ff Does anybody know if there is a problem in virtio driver with vlans? Thanks, Matej
_______________________________________________ vpp-dev mailing list vpp-dev@lists.fd.io https://lists.fd.io/mailman/listinfo/vpp-dev
