On 4 Jan 2017, at 13:42, Neale Ranns (nranns) <nra...@cisco.com> wrote:
Hi Klement, Maciek,
What environment are you running the tests in?
I get different results. Running in the default vagrant env provided in 17.0.
Everything passes apart from:
======================================================================
Bidirectional Forwarding Detection (BFD)
======================================================================
verify session goes down after inactivity OK
hold BFD session up OK
large remote RequiredMinRxInterval ERROR [ temp dir
used by test case: /tmp/vpp-unittest-BFDTestCase-F7O6hZ ]
bring BFD session up ERROR [ temp dir
used by test case: /tmp/vpp-unittest-BFDTestCase-F7O6hZ ]
verify slow periodic control frames while session down ERROR [ temp dir
used by test case: /tmp/vpp-unittest-BFDTestCase-F7O6hZ ]
no packets when zero BFD RemoteMinRxInterval ERROR [ temp dir
used by test case: /tmp/vpp-unittest-BFDTestCase-F7O6hZ ]
details below. Different runs give different combinations of failures from this
BFD list.
/neale
=====================================================================
ERROR: large remote RequiredMinRxInterval
----------------------------------------------------------------------
Traceback (most recent call last):
File "/vpp/test/test_bfd.py", line 257, in test_large_required_min_rx
self.bfd_session_up()
File "/vpp/test/test_bfd.py", line 219, in bfd_session_up
p = self.wait_for_bfd_packet()
File "/vpp/test/test_bfd.py", line 171, in wait_for_bfd_packet
p = self.pg0.wait_for_packet(timeout=timeout)
File "/vpp/test/vpp_pg_interface.py", line 217, in wait_for_packet
self.wait_for_capture_file(timeout)
File "/vpp/test/vpp_pg_interface.py", line 204, in wait_for_capture_file
raise Exception("Capture file did not appear within timeout")
Exception: Capture file did not appear within timeout
======================================================================
ERROR: bring BFD session up
----------------------------------------------------------------------
Traceback (most recent call last):
File "/vpp/test/test_bfd.py", line 234, in test_session_up
self.bfd_session_up()
File "/vpp/test/test_bfd.py", line 219, in bfd_session_up
p = self.wait_for_bfd_packet()
File "/vpp/test/test_bfd.py", line 171, in wait_for_bfd_packet
p = self.pg0.wait_for_packet(timeout=timeout)
File "/vpp/test/vpp_pg_interface.py", line 217, in wait_for_packet
self.wait_for_capture_file(timeout)
File "/vpp/test/vpp_pg_interface.py", line 204, in wait_for_capture_file
raise Exception("Capture file did not appear within timeout")
Exception: Capture file did not appear within timeout
======================================================================
ERROR: verify slow periodic control frames while session down
----------------------------------------------------------------------
Traceback (most recent call last):
File "/vpp/test/test_bfd.py", line 187, in test_slow_timer
self.wait_for_bfd_packet()
File "/vpp/test/test_bfd.py", line 171, in wait_for_bfd_packet
p = self.pg0.wait_for_packet(timeout=timeout)
File "/vpp/test/vpp_pg_interface.py", line 217, in wait_for_packet
self.wait_for_capture_file(timeout)
File "/vpp/test/vpp_pg_interface.py", line 204, in wait_for_capture_file
raise Exception("Capture file did not appear within timeout")
Exception: Capture file did not appear within timeout
======================================================================
ERROR: no packets when zero BFD RemoteMinRxInterval
----------------------------------------------------------------------
Traceback (most recent call last):
File "/vpp/test/test_bfd.py", line 201, in test_zero_remote_min_rx
p = self.wait_for_bfd_packet()
File "/vpp/test/test_bfd.py", line 171, in wait_for_bfd_packet
p = self.pg0.wait_for_packet(timeout=timeout)
File "/vpp/test/vpp_pg_interface.py", line 217, in wait_for_packet
self.wait_for_capture_file(timeout)
File "/vpp/test/vpp_pg_interface.py", line 204, in wait_for_capture_file
raise Exception("Capture file did not appear within timeout")
Exception: Capture file did not appear within timeout
Ran 64 tests in 84.161s
On 04/01/2017, 09:45, "csit-dev-boun...@lists.fd.io on behalf of Klement Sekera -X
(ksekera - PANTHEON TECHNOLOGIES at Cisco)" <csit-dev-boun...@lists.fd.io on behalf of
ksek...@cisco.com> wrote:
I tried doing a git checkout origin/stable/1701 - is that the correct
branch? On that one, the GRE indeed doesn't work, but I don't think it's
'make test' issue, here's a sample from packet trace:
------------------- Start of thread 0 vpp_main -------------------
Packet 1
00:00:07:119382: pg-input
stream pcap1, 88 bytes
current data 0, length 88, free-list 6, trace 0x0
IP4: 02:01:00:00:ff:02 -> 02:fe:39:17:74:65
GRE: 2.2.2.2 -> 172.16.1.1
tos 0x00, ttl 64, length 74, checksum 0xc96f
fragment id 0x0001
GRE 0x0001
00:00:07:119802: ethernet-input
IP4: 02:01:00:00:ff:02 -> 02:fe:39:17:74:65
00:00:07:120048: ip4-input
GRE: 2.2.2.2 -> 172.16.1.1
tos 0x00, ttl 64, length 74, checksum 0xc96f
fragment id 0x0001
GRE 0x0001
00:00:07:120113: ip4-lookup
fib 0 dpo-idx 5 flow hash: 0x00000000
GRE: 2.2.2.2 -> 172.16.1.1
tos 0x00, ttl 64, length 74, checksum 0xc96f
fragment id 0x0001
GRE 0x0001
00:00:07:120404: ip4-local
GRE: 2.2.2.2 -> 172.16.1.1
tos 0x00, ttl 64, length 74, checksum 0xc96f
fragment id 0x0001
GRE 0x0001
00:00:07:120495: gre-input
GRE: tunnel 0 len 74 src 2.2.2.2 dst 172.16.1.1
00:00:07:120543: error-drop
gre-input: unknown protocol
all 50 packets printed in the packet trace share the same fate...
Thanks,
Klement
Quoting Maciek Konstantynowicz (mkonstan) (2017-01-03 18:46:19)
// Typed this email before the live discussion on vpp call just now -
still sending it out :)
Hello, After the previous ver of this thread went into a frenzy of emails
and fixes in vpp make test code,
I wanted to re-check the situation.
And as it is a New Year, I’m not lazy anymore, and did run make test in
both vpp branches :)
vpp master branch works, stable/1701 does not..
1. master
Ran 65 tests in 90.838s
OK (skipped=5)
make[1]: Leaving directory `/home/maciek/src/vpp2/test'
2. stable/1701
======================================================================
ERROR: GRE tunnel Tests
Exception: Capture file did not appear within timeout
======================================================================
ERROR: GRE tunnel L2 Tests
Exception: Capture file did not appear within timeout
======================================================================
ERROR: MPLS Local Label Binding test
AttributeError: label
======================================================================
ERROR: MPLS label imposition test
IndexError: Layer [IP] not found
======================================================================
ERROR: MPLS label swap tests
AttributeError: label
======================================================================
ERROR: MPLS Tunnel Tests
----------------------------------------------------------------------
IndexError: Layer [IP] not found
Ran 64 tests in 59.980s
FAILED (errors=6, skipped=5)
make[1]: *** [test] Error 1
make[1]: Leaving directory `/home/maciek/src/vpp2/test'
make: *** [test] Error 2
Fix?
-Maciek
On 12 Dec 2016, at 16:19, Maciek Konstantynowicz (mkonstan)
<[1]mkons...@cisco.com> wrote:
Hello, Does anyone know if vpp make test is back on track to be ready to
be used for vpp make verify jobs on a per patch basis?
Being lazy I know - cause I could run it myself :)
-Maciek
References
Visible links
1. mailto:mkons...@cisco.com
_______________________________________________
csit-dev mailing list
csit-...@lists.fd.io
https://lists.fd.io/mailman/listinfo/csit-dev
