Thanks Klement! That worked. From: Klement Sekera -X (ksekera - PANTHEON TECHNOLOGIES at Cisco) [mailto:ksek...@cisco.com] Sent: Thursday, October 27, 2016 2:17 PM To: Shravan Ambati <shravan.amb...@calix.com> Cc: vpp-dev <vpp-dev@lists.fd.io> Subject: Re: [vpp-dev] Connecting Vpp to a physical NIC.
Hi, I noticed the wiki doesn't say taht the interface should be down. Is your interface down before starting vpp? I think that the vpp won't touch an interface which is up... Klement On Oct 27, 2016 11:08 PM, Shravan Ambati <shravan.amb...@calix.com<mailto:shravan.amb...@calix.com>> wrote: Hi I am new to vpp and I was trying to connect a pci interface to vpp. I am using stable/1606 branch. As per instructions in the following the wiki https://wiki.fd.io/view/VPP/How_To_Connect_A_PCI_Interface_To_VPP I have appended the pci address to the startup config file – dpdk { socket-mem 1024 dev 0000:00:08.0 } ubuntu@ubuntu:~$ sudo lshw -class network -businfo Bus info Device Class Description ===================================================== pci@0000:00:03.0<mailto:pci@0000:00:03.0> eth0 network 82540EM Gigabit Ethernet Controller pci@0000:00:08.0<mailto:pci@0000:00:08.0> eth1 network 82540EM Gigabit Ethernet Controller And restarted vpp. But Vpp still does not have the NIC – ubuntu@ubuntu:~$ sudo vppctl show int Name Idx State Counter Count local0 0 down pg/stream-0 1 down pg/stream-1 2 down pg/stream-2 3 down pg/stream-3 4 down Am I missing something? Thanks Shravan
_______________________________________________ vpp-dev mailing list vpp-dev@lists.fd.io https://lists.fd.io/mailman/listinfo/vpp-dev
