All sorts of wonderful things can be designed into the Rossi type system.
Judging from the pictures we have seen of the prototype modules for the 1
MeV demo model, I am only saying that these innovative designs would not be
there in the first commercial product release on or about October.



You won’t see a computer controlled system for some year going forward.



It will take some years for a quality Rossi type reactor product to be
properly designed and emerge commercially.



A performance, availability, and reliability track record must be produced
by real world use. This takes time. As a user, I would let someone else
debug this system. I would wait five years before I would even consider
going with this type of reactor to give the design some time to perfect and
solidify.



Never buy version 1.0 of anything.



Regards,



Axil


On Fri, May 6, 2011 at 12:02 AM, <[email protected]> wrote:

> In reply to  Axil Axil's message of Thu, 5 May 2011 23:39:11 -0400:
> Hi,
> [snip]
> >In your vision of the large Rossi reactor, do you break out an acetylene
> >torch and de- solder the copper fittings that surround the stainless steel
> >reaction vessel? Do you drain all the water out of the reactors steam
> loop?
> >Do you compromise the steam circuit to remove a 2.5 kw unit? When you get
> >the reactor back together, do you rerun boiler certification pressure
> tests?
> >How long will all this take to accomplish?
> [snip]
> You can arrange computer controlled valves in the plumbing to shuttle input
> water/output steam however you like.
>
> After the computer takes the device out of the active circuit, it can cool
> off
> naturally. Then someone has to physically replace it, which can either be
> easy
> or difficult, depending on the specific mechanical features built into the
> array
> design.
>
> Though I don't know of any off hand, I imagine that there are "garden hose"
> type
> connections available for this sort of thing.
>
> Regards,
>
> Robin van Spaandonk
>
> http://rvanspaa.freehostia.com/project.html
>
>

Reply via email to