I may have been actually talking about Ademco Express, but now I know there's more than what I even thought... Sheesh.
Either way, we try to have our setup only be just a stepping stone when moving people off of POTS and consolidating their services. http://www.emergency24.com/cp/formats.aspx On Tue, Dec 15, 2020, 21:18 Nick Garrett <[email protected]> wrote: > They're referring to the signaling type of the fire alarm dialer to the > monitoring service / central station. There are different types including > different kinds of pulsing, and then the Ademco contact ID which is mainly > used in addressable systems. > > We have had luck with the 4+2 and other pulse dialings but mixed results > with contact ID since it is dumped onto the line so quickly (I have a > recording of it somewhere - it's very quick and sometimes is too quick > where it is not received reliably - inband DTMF settings or not). It seems > that systems with Ademco contact ID also like to call out a lot more than > pulse systems likely because they're busier systems and probably more to > report on. > > > We usually put our dialtone on only where absolutely needed, or if it's > some temporary setup for our customers and we try to corral them to a > network monitor solution or a cellular / wireless / AESnet setup, again as > others have mentioned, it will all depend on the jurisdiction and what they > allow/disallow/support. > > On Tue, Dec 15, 2020, 19:30 Camille Issa <[email protected]> wrote: > >> VoIP protocol is SIP. >> >> Camille Issa >> 919-623-2137 >> ------------------------------ >> *From:* Dennis <[email protected]> >> *Sent:* Tuesday, December 15, 2020 7:00:19 PM >> *To:* Camille Issa <[email protected]> >> *Cc:* [email protected] <[email protected]> >> *Subject:* Re: [VoiceOps] ATAs compatible with fire alarm panels >> >> What signalling protocol are they using? >> >> We have a few Ademco Contact-ID panels out there. I've had good luck >> using Grandstreams with inband dtmf. >> >> >> Thanks... >> -Dennis >> >> >> On Tue, Dec 15, 2020 at 1:36 PM Camille Issa <[email protected]> wrote: >> >> Hello all – looking for recommendations (other than keeping the analog >> line) for VoIP ATA’s that are compatible with fire alarm panels. Anyone got >> a good working solution out there? >> >> >> >> Camille Issa | Vice President, Sales >> * Alianza – The Cloud Communications Platform Company* >> >> Call Or *Text* 919-229-4040 | [email protected] >> Alianza <http://www.alianza.com/> | Blog >> <http://www.alianza.com/call-to-the-cloud> | LinkedIn >> <http://www.linkedin.com/company/alianza> | Twitter >> <http://www.twitter.com/alianza_inc> >> >> >> _______________________________________________ >> VoiceOps mailing list >> [email protected] >> https://puck.nether.net/mailman/listinfo/voiceops >> >> _______________________________________________ >> VoiceOps mailing list >> [email protected] >> https://puck.nether.net/mailman/listinfo/voiceops >> >
_______________________________________________ VoiceOps mailing list [email protected] https://puck.nether.net/mailman/listinfo/voiceops
