OK but this all depends on whether your works proxy server can, (a) Map ports to addresses.
(b) Can you VNC from your works proxy server to your home PC, if you can't you've probably got a firewall in the way and none of the following will work. If you can't map ports from your proxy server then just download a copy of 'HHproxy' from http://home.t-online.de/home/sog-luebeck/hhproxy.htm You obviously don't need another proxy server but you can trim out all the http proxy bits out and just leave the port mapping bits in and run it alongside the current one. I'll assume your home PC IP address is 123.123.123.1 And your proxy server is 10.10.10.1 Add a line that reads... TcpMap 5901 120 123.123.123.1 5900 1 1 to the HHproxy.cfg file and start the proxy server. Then run Vncviewer and connect to 10.10.10.1:1 This will cause the viewer to try connecting to your proxy server on port 5901 but as this is not a listening VNC server port, your server will not answer....... but the mapped port on the proxy will forward the request to the IP address and port listed. HHproxy can be run as an NT Service. Don't be put off by the config file, HHproxy is really quite good. Good luck Peter Moore -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Thursday 09 May 2002 05:29 To: [EMAIL PROTECTED] Subject: Re: Proxy Servers Hi Peter, I am sorry for asking this, but can you explain it in details with example. I want to use this between my home and office pc. Both are office XP, but I have insternet sharing in office and Cable Internet at home. How can I connect to my home pc from office ? Regards, Hemang ----- Original Message ----- From: "Peter Moore" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, May 08, 2002 10:11 PM Subject: RE: Proxy Servers You need to tell the proxy server at your site to map for instance port 5901 to x.x.x.x on port 5900 (replace x.x.x.x with the destination server IP) To connect to the remote server you run Vncviewer and type in, <the IP address of your proxy server>:1 (or whatever port you've mapped) this will cause the proxy to redirect the packets to the mapped address. Just remember in this scenario you always VNC to the proxy server and it does the mapping, don't try to connect directly to the remote server. It's also possible to map in through a proxy if permissions allow. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Tuesday 07 May 2002 15:46 To: [EMAIL PROTECTED] Subject: Proxy Servers Anyone have any experience running Tight VNC across a proxy server? I have a remote site that would like to connect but always receives connection failed. Coming from another site without the proxy it works fine. Settings anyone? --------------------------------------------------------------------- To unsubscribe, mail [EMAIL PROTECTED] with the line: 'unsubscribe vnc-list' in the message BODY See also: http://www.uk.research.att.com/vnc/intouch.html --------------------------------------------------------------------- --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.351 / Virus Database: 197 - Release Date: 19/04/02 --------------------------------------------------------------------- To unsubscribe, mail [EMAIL PROTECTED] with the line: 'unsubscribe vnc-list' in the message BODY See also: http://www.uk.research.att.com/vnc/intouch.html --------------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, mail [EMAIL PROTECTED] with the line: 'unsubscribe vnc-list' in the message BODY See also: http://www.uk.research.att.com/vnc/intouch.html --------------------------------------------------------------------- --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.360 / Virus Database: 199 - Release Date: 07/05/02 --------------------------------------------------------------------- To unsubscribe, mail [EMAIL PROTECTED] with the line: 'unsubscribe vnc-list' in the message BODY See also: http://www.uk.research.att.com/vnc/intouch.html ---------------------------------------------------------------------
