Well, nonetheless, on mine is still changes. :) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Beerse, Corni Sent: Tuesday, March 19, 2002 8:48 AM To: '[EMAIL PROTECTED]' Subject: RE: VNC and NAT
> -----Original Message----- > > Yes, but if the lease is up and the computer goes down or network > connectivity is spotty, it does change. My service changes me all the > time and even my DHCP behind my firewall switches me from > time to time, > unfortunately. Nonetheless, it is worth a try, you are 100% > correct on > the DHCP lease policies, I just found them to be unreliable in my > application. The formal protocol I've been told is: Half way the lease period, the lease is extended to be-ing an entire lease period once again If the half-time upgrade did not succeed, there is at least one more if there is 10% of the time left. There could be more on 20% or other tresholds. As long as the current lease has not been expired, the client can always upgrade. Depending on the implementation, this can be up to 1 second before the lease expires. If the client dies and the server keeps running: Once the client comes back up and does a new requrest, if the server recognizes the client, it will provide the old, running lease. For ethernet, the recognition is on mac-address which is global-unique. For dial-up lines, the client can be recognized in various ways but most systems don't care or do't bother: they just give a new lease and the old one will expire. If there is a pool of dhcp servers, the lazy sysadmin will configure them both as single servers with each an ip range of their own. The better sysadmin will configure them in such a way that the runtime configuration is distributed over the servers. Hence they all provide addresses from the same pool and recognize old leases provide by other servers. CBee > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of Beerse, Corni > Sent: Tuesday, March 19, 2002 1:30 AM > To: '[EMAIL PROTECTED]' > Subject: RE: VNC and NAT > > > -----Original Message----- > > That is correct, but as we know, the DHCP MAY change at the most > > inconvienient times. You can set up your DHCP server to assign > > That's not true! IF a DHCP server has leased an IP address to an other > machine, there is a lease time and a lease period. During the lease > time, > the client can alwasy extend the lease with the lease period. The DHCP > server must accept this extend. Hence: once you got an IP address, you > can > use it forever as long as you keep extending the lease within > the lease > period. > > > addresses only within a certain range and then fix the IP of the VNC > > server outside of that range. For instance, my network > topology looks > > like this: > > > > Other network systems: > > Router: 192.168.1.1 > > DHCP: 192.168.1.100 - 192.168.1.254 > > > > VNC Server: > > IP Address: 192.168.1.10 > > Gateway: 192.168.1.1 > > DNS: The DNS for your ISP. > > > > This always works if you have access to your DHCP configuration. If > > not, well then there is nothing you can do. > > > > Also, if your DHCP is due to your ISP on some sort of Broadband > > connection, then I suggest TZO (www.tzo.com), they will fix an IP > > Address to an ISP's DHCP. But make sure that you have some sort of > > firewall in place. > --------------------------------------------------------------------- > To unsubscribe, mail [EMAIL PROTECTED] with the line: > 'unsubscribe vnc-list' in the message BODY > See also: http://www.uk.research.att.com/vnc/intouch.html > --------------------------------------------------------------------- > --------------------------------------------------------------------- > To unsubscribe, mail [EMAIL PROTECTED] with the line: > 'unsubscribe vnc-list' in the message BODY > See also: http://www.uk.research.att.com/vnc/intouch.html > --------------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, mail [EMAIL PROTECTED] with the line: 'unsubscribe vnc-list' in the message BODY See also: http://www.uk.research.att.com/vnc/intouch.html --------------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, mail [EMAIL PROTECTED] with the line: 'unsubscribe vnc-list' in the message BODY See also: http://www.uk.research.att.com/vnc/intouch.html ---------------------------------------------------------------------
