The GX1 is a x86-compatible processor. Get someone who has the WinCE SDK to compile a version for the WinCE simulator and release that. It should work unmodified on the webpad.
The simulator is very funky - it thunks the Win32 calls from WinCE apps to the real system and the processor just happens to be the x86 processor under your PC's hood. The simulator was often much faster than the real devices for a long, long time. The most popular WinCE devices prior to the current IPAQ devices were mainly SH3's and MIPs. The new WinCE devices (PocketPC 2002) are all ARM-based devices. The first generation WinCE devices had SH1's, but these are rare out there. Andrew -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Rob Kenyon Sent: Friday, 8 March 2002 2:02 AM To: [EMAIL PROTECTED] Subject: RE: Windows CE 3.0 Truth is, most of the CE machines I know run different processors. Surely someone out there knows a bit more than I do (someone had to compile what's out there...) Rob -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Virkki Marko Sent: Thursday, March 07, 2002 7:09 AM To: '[EMAIL PROTECTED]' Subject: VS: Windows CE 3.0 Thank you Rob! So another question. Is there any versions which will run in National GX1 processor? I would give all the information what I got if there is any questions. Marko > -----Alkuperdinen viesti----- > Ldhettdjd: Rob Kenyon [SMTP:[EMAIL PROTECTED]] > Ldhetetty: 7. maaliskuuta 2002 15:39 > Vastaanottaja: [EMAIL PROTECTED] > Aihe: RE: Windows CE 3.0 > > CE apps are not only CE specific but CPU specific also. You need to > find a version compiled for your CPU. Any serious CE developer will > gladly (sometimes over-enthusiastically) tell you what CPU's they > expect the application to work on. > > Rob > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of Virkki Marko > Sent: Thursday, March 07, 2002 4:49 AM > To: '[EMAIL PROTECTED]' > Subject: Windows CE 3.0 > > > I have WepPad with Wndows CE 3.0 and it running in National GX1 > processor. I have tested both vncviewer versions (MIP and the other) > but allways same error message when I try to launch the viewer: > 'vncview' is not a valid Windows CE application. Any suggestions? > --------------------------------------------------------------------- > To unsubscribe, mail [EMAIL PROTECTED] with the line: > 'unsubscribe vnc-list' in the message BODY See also: > http://www.uk.research.att.com/vnc/intouch.html > --------------------------------------------------------------------- > --------------------------------------------------------------------- > To unsubscribe, mail [EMAIL PROTECTED] with the line: > 'unsubscribe vnc-list' in the message BODY See also: > http://www.uk.research.att.com/vnc/intouch.html > --------------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, mail [EMAIL PROTECTED] with the line: 'unsubscribe vnc-list' in the message BODY See also: http://www.uk.research.att.com/vnc/intouch.html --------------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, mail [EMAIL PROTECTED] with the line: 'unsubscribe vnc-list' in the message BODY See also: http://www.uk.research.att.com/vnc/intouch.html --------------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, mail [EMAIL PROTECTED] with the line: 'unsubscribe vnc-list' in the message BODY See also: http://www.uk.research.att.com/vnc/intouch.html ---------------------------------------------------------------------
