thanks for your hint. the following configuration now meets my needs: [HKEY_LOCAL_MACHINE\SOFTWARE\ORL\WinVNC3] "AuthRequired"=dword:00000000 "AuthHosts"="-:?192.168:" [HKEY_LOCAL_MACHINE\SOFTWARE\ORL\WinVNC3\Default] "SocketConnect"=dword:00000001 "AutoPortSelect"=dword:00000001 "InputsEnabled"=dword:00000001 "LocalInputsDisabled"=dword:00000000 "QuerySetting"=dword:00000002 "QueryTimeout"=dword:0000000a "Password"=hex:**,**,**,**,**,**,**,** "PollUnderCursor"=dword:00000000 "PollForeground"=dword:00000001 "PollFullScreen"=dword:00000000 "OnlyPollConsole"=dword:00000001 "OnlyPollOnEvent"=dword:00000000 "AllowProperties"=dword:00000000 [HKEY_LOCAL_MACHINE\SOFTWARE\ORL\WinVNC3\SYSTEM] "QuerySetting"=dword:00000001 "Password"=hex:**,**,**,**,**,**,**,** kroepfl thomas (network administrator) -----Urspr|ngliche Nachricht----- Von: James ''Wez'' Weatherall [mailto:[EMAIL PROTECTED]] Gesendet: Dienstag, 05. Dezember 2000 12:27 An: [EMAIL PROTECTED] Betreff: Re: disable viewing properties dialog What you actually want is to set AllowProperties and then to set the _local_ per-user properties for the Default user to the required settings, on each machine. The Global per-user settings can be modified by the user in the registry, therefore AllowProperties=0 makes no sense if you read them. Cheers, James "Wez" Weatherall -- "The path to enlightenment is /usr/bin/enlightenment" Laboratory for Communications Engineering, Cambridge - Tel : 766513 AT&T Labs Cambridge, UK - Tel : 343000 ----- Original Message ----- From: <Krvpfl>; "Thomas" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, December 05, 2000 10:41 AM Subject: disable viewing properties dialog > hi! > > is there a possibility to disable the properties dialog without stopping the > global-per-user settings? > > i want the user to be informed if there is an incomming connection, and the > user has to accept the connection (global per-user setting: > QuerySettings=2). but if nobody is working on the winvnc-server > (logon-screen), i want to get the screen without acception (local per-user > setting: QuerySettings=1). > > this configuration works very fine. the user should not be able to change > anything in the configuration, e.g. the password. but if i activate > AllowProperties=0 (local per-user setting) to disable the properties dialog > box, all global per-user settings are stopped. > > any idea? > > kroepfl thomas > (network administrator) > --------------------------------------------------------------------- > To unsubscribe, send a message with the line: unsubscribe vnc-list > to [EMAIL PROTECTED] > See also: http://www.uk.research.att.com/vnc/intouch.html > --------------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, send a message with the line: unsubscribe vnc-list to [EMAIL PROTECTED] See also: http://www.uk.research.att.com/vnc/intouch.html --------------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, send a message with the line: unsubscribe vnc-list to [EMAIL PROTECTED] See also: http://www.uk.research.att.com/vnc/intouch.html ---------------------------------------------------------------------
