Due to the wisdom of Microsoft engineers my static IP network died. After reboot the static IP was reset to 0.0.0.0. I have installed Hamachi but because DHCP was disabled, and the service couldn't be turned on, it refused to work.
Since we needed some important files I have installed your software. The install hanged and was stuck for an hour or more, because apparently there was an old install it was trying unsuccessfully to update. I reset... The machine in question didn't turn off as expected since it couldn't terminate the install task, so I have pressed the small reset button. After reboot I was greeted with an 800x600 4 bit plane display, which appears to have been cause by a new VNC display driver/adapter. Next I disabled it and reset. It rebooted using the same 4 bit plane display, after which I removed the driver in question and rebooted yet again. BSOD: Stop: 0X0000007B (0XF7946528, 0XC0000034, 0X00000000, 0X00000000) The machine BSODs in safe mode as well, so for all practical purposes it is dead. What I'm asking for is the .reg file that this program creates. Thank you. _______________________________________________ VNC-List mailing list VNC-List@realvnc.com To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
