Brian, /etc/sysconfig/vncserver is not part of the standard VNC distribution - it's probably specific to your GNU/Linux distribution, so you could try asking the vendor of that for help.
Cheers, Wez @ RealVNC Ltd. > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Brian Mearns > Sent: 21 February 2007 22:43 > To: vnc-list@realvnc.com > Subject: VNCSERVERARGS geometry not working > > I'm trying to start a vncserver display on my system using the > /etc/sysconfig/vncserver configuration file, which looks like this: > #==================================================== > VNCSERVERS="5:mearns" > VNCSERVERARGS[5]="-geometry 300x240 -depth 8" > #================EOF================================= > When I restart the vncserver service (or even reboot), my display:5 > comes up (meaning I can connect to it remotely using > vncviewer), but the > geometry is not right, and I don't think the color depth is > either. If I > start a vncserver from the command line using the same -geometry and > -depth params, it works fine, the geom is correct, and everything. > > Does anyone know what I'm doing wrong or have any suggestions? > > Thanks, > -Brian > _______________________________________________ > VNC-List mailing list > VNC-List@realvnc.com > To remove yourself from the list visit: > http://www.realvnc.com/mailman/listinfo/vnc-list _______________________________________________ VNC-List mailing list VNC-List@realvnc.com To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
