Ahh.. yes. ZA would be an issue. You should add winvnc4.exe as an exception to *always* be granted. As for the public/private ports, yes. 5901 "public" and 5900 "private" for pc2 would work just fine. The reason you can't have port 5900 for both is that you have the same external IP for both machines (unless you've got some sort of subnet we dont' know about, and then you could have two different IP addresses... but 99% of the people here trying to access "home" from "work" dont' have that setup! <Grin>) and your router would likely not be able to figure out where to send the network traffic if you tried to configure both machines to use 5900 externally/publicly.
-----Original Message----- From: Simen Lxland [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 11, 2005 9:35 AM To: John Aldrich Cc: [email protected] Subject: Re: RealVNC questions about ports and display number One thing i can think of is a Zone Alarm pop-up on my pc2 at home which needs to be granted access before i can get through from work. I will check later today. Is there no need to configure display number in VNC? How can VNC differ from the different ports? Can you answer this? In my Dlink routher DI624+ i beleive the public port is the 5901 port and the private port is the 5900 when forwarding on pc2. On my other pc I have 5900 on both public and private. On 11/10/05, John Aldrich <[EMAIL PROTECTED]> wrote: > Simon: > I'd say you should put redirectme.net:1 in the viewer at work. All things > considered, though, it *should* have worked all along. Don't know why it > didn't work, though. You can also try it as :xxx.redirectme.net::5901 and > see if that makes any difference. (Note the double ":") > > -----Original Message----- > From: Simen Lxland [mailto:[EMAIL PROTECTED] > Sent: Tuesday, October 11, 2005 9:28 AM > To: John Aldrich > Cc: [email protected] > Subject: Re: RealVNC questions about ports and display number > > > OK, thanx! Ill try! > > But where do i specfi the port :1 (redirectme.net:1)? In the viewer of > the machine i use at work or at the server for pc2 (since pc1 works > fine already). > > > > On 11/10/05, John Aldrich <[EMAIL PROTECTED]> wrote: > > I'll be honest with you... I've never had to use the web client. That > being > > said, if you're going to use the browser to view your desktops, you should > > probably open the 580x ports as well, forwarding them to the appropriate > > system, unless you're using the paid-for version of RealVNC which allows > you > > to use a single port for both Java and VNC client. > > Also, you shouldn't need two separate machine names on no-ip -- just > > different display numbers on the same "machine name" as long as they share > > an internet connection. If you check, I think you'll find that > > xxx.redirectme.net and xxx1.redirectme.net are the same IP address. So, > you > > should ONLY have to use xxx.redirectme.net and xxx.redirectme.net:1. > > > > -----Original Message----- > > From: Simen Lxland [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, October 11, 2005 9:20 AM > > To: John Aldrich > > Cc: [email protected] > > Subject: Re: RealVNC questions about ports and display number > > > > > > Do I have to do anything about the display number? > > > > Or should it be enough using vncviewer as this to connect to either: > > > > http://xxx.redirectme.net -> pc1 > > http://xxx1.redirectme.net -> > > > > In my Dlink routher DI624+ i beleive the public port is the 5901 port > > and the private port is the 5900 when forwarding. On my other pc I > > have 5900 on both public and private. > > > > On 11/10/05, John Aldrich <[EMAIL PROTECTED]> wrote: > > > Well, what *seems* to be the recommended action is to forward port 5900 > to > > > PC1's port 5900, forward port 5901 to PC2's Port 5900, and so on. That > way > > > you get a unique port on the router for each PC, but you don't have to > > > change the default ports on the individual PCs. You *can* do a > > > straight-through port-to-port mapping, but that seems more work than is > > > strictly necessary to me. :-) > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > > > Behalf Of Simen Lxland > > > Sent: Tuesday, October 11, 2005 8:42 AM > > > To: [email protected] > > > Subject: Fwd: RealVNC questions about ports and display number > > > > > > > > > One more question! > > > > > > Do I have to change the connection port on each server? Today on pc1 i > > > use port 5900 and on pc2 i use 5901 or should the ports be the same? > > > Should I change the display number on each server? > > > > > > Should my port forwarding on my router be TCP 5900 only or TCP 5900 > > > and TCP 5901? > > > > > > ---------- Forwarded message ---------- > > > From: Simen Lxland <[EMAIL PROTECTED]> > > > Date: 11-Oct-2005 11:54 > > > Subject: RealVNC questions about ports and display number > > > To: [email protected] > > > > > > > > > I have two pc's on my LAN and are trying to connect to them from work. > > > I have set up both with static DCHP-adresses, I have mapped the port > > > forwarding (5900 for pc1 and 5901 for pc two) in my router (Dlink > > > DI-624+) and made sure the firewall in the router is accepting these > > > ports. I use ZoneAlarm on both pc's. I have set up VNC-server as a > > > service on both pc's. I use No-ip client on both, > > > http://xxx.redirectme.net on pc1 and http://xxx1.redirectme.net on > > > pc2. > > > > > > I manage to connect to pc one with the vnc-viewer at my work. But when > > > I try to connect to pc two i get timeout..... > > > > > > I try this url to connect to: http://xxx1.redirectme.net:5091 and > > > http://xxx1.redirectme.net:1 - is this right or wrong? > > > > > > What do i have to do to get this to work- seems a bit strange to me > > > why i can connect to pc1 but not to pc2...... > > > > > > Regards > > > > > > Qtip > > > _______________________________________________ > > > VNC-List mailing list > > > [email protected] > > > To remove yourself from the list visit: > > > http://www.realvnc.com/mailman/listinfo/vnc-list _______________________________________________ VNC-List mailing list [email protected] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
