By default ARM SMMU drivers use MSI_IOVA_BASE macro to reserve
PCI MSI IOVA memory range, this assumes that all the platforms have
MSI_IOVA_BASE address available for MSI reservation. However, this
is not always the case, as some platforms may have the default
address reserved for some other purposes and as a consequence ARM SMMU
drivers can't reserve MSI memory for those platforms.
To address this issue, add a new dts property
"arm,smmu-faulty-msi-iova" which can be used to hold faulty MSI IOVA
address. This property can be passed to ARM SMMU drivers via device
tree so that the drivers can select appropriate MSI IOVA base address
which doesn't intersect with the faulty MSI IOVA address.
Signed-off-by: Shyam Saini <shyamsa...@linux.microsoft.com>
---
Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml | 8 ++++++++
Documentation/devicetree/bindings/iommu/arm,smmu.yaml | 8 ++++++++
2 files changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
index 75fcf4cb52d9..13b615ca38e1 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
@@ -56,6 +56,13 @@ properties:
NOTE: this only applies to the SMMU itself, not masters connected
upstream of the SMMU.
+ arm,smmu-faulty-msi-iova:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Specifies a faulty PCI MSI base I/O Virtual Address. If this is passed
+ via dts then arm SMMU driver appropriately select suitable MSI_IOVA base
+ which does not intersect with faulty MSI IOVA passed in this dts
property.
+
msi-parent: true
hisilicon,broken-prefetch-cmd:
@@ -92,4 +99,5 @@ examples:
dma-coherent;
#iommu-cells = <1>;
msi-parent = <&its 0xff0000>;
+ arm,smmu-faulty-msi-iova = <0x8000000>;
};
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index 7b9d5507d6cc..1aba9d59d495 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -208,6 +208,13 @@ properties:
NOTE: this only applies to the SMMU itself, not masters connected
upstream of the SMMU.
+ arm,smmu-faulty-msi-iova:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Specifies a faulty PCI MSI base I/O Virtual Address. If this is passed
+ via dts then ARM SMMU driver appropriately select suitable MSI_IOVA base
+ which does not intersect with faulty MSI IOVA passed in this dts
property.
+
calxeda,smmu-secure-config-access:
type: boolean
description:
@@ -680,6 +687,7 @@ examples:
#iommu-cells = <1>;
/* always ignore appended 5-bit TBU number */
stream-match-mask = <0x7c00>;
+ arm,smmu-faulty-msi-iova = <0x8000000>;
};
bus {
--
2.34.1
