On 12/17/23 11:51, Mario Marietto wrote:
AMD gpu works great with bhyve and they are recognized by a Windows vm.

On Sun, Dec 17, 2023 at 11:43 AM Stephan Althaus <stephan.alth...@duedinghausen.eu> wrote:

    On 12/16/23 18:49, Mario Marietto wrote:
    for sure you can use nVidia gpu on the host and the intel one on
    the windows 11 vm.

    Il sab 16 dic 2023, 18:11 Nuno Teixeira <edua...@freebsd.org> ha
    scritto:

        It seems that nvidia passtrhu isn't working (yet).

        Related to intel integrated graphics, I don't know if I can
        use it for ppt since it is in use by freebsd.
        Other thing, if I boot with BIOS on nvidia dedicated then
        intel doesn't show up in pciconf...

        Mario Marietto <marietto2...@gmail.com> escreveu no dia
        sábado, 16/12/2023 à(s) 16:34:

            Are you trying to pass the nvidia gpu to windows vm ? or
            your intel gpu ?

            Il sab 16 dic 2023, 17:07 Nuno Teixeira
            <edua...@freebsd.org> ha scritto:

                Hello all,

                Specs:
                - laptop with integrated intel + dedicated nvidia
                - 15-CURRENT 3b1904d9eb04 amd64
                - win11 with nvme and tpm

                I'm sharing my results with nvidia passthru:
                ###
                /boot/loader.conf.local:
                vmm_load="YES"
                pptdevs="1/0/0 1/0/1"

                ppt0@pci0:1:0:0:  class=0x030000 rev=0xa1 hdr=0x00
                vendor=0x10de device=0x1f99 subvendor=0x17aa
                subdevice=0x3fa5
                    vendor     = 'NVIDIA Corporation'
                    device     = 'TU117M [GeForce GTX 1650 Mobile /
                Max-Q]'
                    class      = display
                    subclass   = VGA
                ppt1@pci0:1:0:1:        class=0x040300 rev=0xa1
                hdr=0x00 vendor=0x10de device=0x10fa subvendor=0x17aa
                subdevice=0x3ffb
                    vendor     = 'NVIDIA Corporation'
                    class      = multimedia
                    subclass   = HDA

                bhyve:
                -s 6:0,passthru,1/0/0 -s 6:1,passthru,1/0/1
                ###

                - Installed nvidia drivers without problems
                - graphic card is detected but is deactivated with a
                triangle and a "!":
                  "Windows stopped this device... code 43"
                - hda is detected and shows no problem

                I've read that some nvidia cards are working...
                Any tips are welcome.

                Not sure if it is possible to use intel integrated as
                it is already in use by OS.

                Thanks,

-- Nuno Teixeira
                FreeBSD Committer (ports)



-- Nuno Teixeira
        FreeBSD Committer (ports)

    Hello!

    i had just the same, here on illumos.
    i didn't get it to work, but i had a similar problem with an AMD
    card :-/

    i think i will try it again in Jan/2024, and then with a fresh
    install of windows...

    Do you use UEFI boot on both host and vm?

    Regards,
    Stephan




--
Mario.

Ok i will give it a try again :-)

Thanks for confirmation!

...for the fault on my side :-)

Reply via email to