On Thu, Jul 06, 2023 at 07:17:14AM +0300, Parav Pandit wrote:
> This patch links how in a PCI transport a group owner can access group
> member (PCI VFs) legacy registers using a legacy registers access
> commands using administration virtqueue infrastructure.
>
> Additionally it extend the PCI notification capability through which a
> PCI VF device indicates to the driver which PCI BAR region to be used
> for driver notifications.
>
> Fixes: https://github.com/oasis-tcs/virtio-spec/issues/167
> Signed-off-by: Parav Pandit <[email protected]>
> ---
> changelog:
> v9->v10:
> - addressed comments from Cornelia
> - fixed errors related to article
> - hardwire to hardwires
> - replaced various to all
> - added hardwire to zero
> v7->v8:
> - addressed comments from Michael
> - made bar offset 64-bit
> - prefix legacy specific structure with _legacy
> - moved generic normative from pci to generic section
> - added link to virtio pci capabilities when referring to bar 0
> - remove 'should' from generic description
> v6->v7:
> - addressed comments from Michael
> - removed driver normative about I/O BAR emulation as it does not
> make much sense for the spec
> - removed references to administration virtqueue
> - rewrote driver legacy region access without guest and hypervisor
> wording
> - added normative for notification region
> - added normative for PCI IDs for device which support legacy commands
> v5->v6:
> - aligned pci capability to 4B as required by PCI spec
> - added text for the PCI capability for the group member device
> v4->v5:
> - split pci transport and generic command section to new patch
> - removed multiple references to the VF
> - written the description of the command as generic with member
> and group device terminology
> - reflected many section names to remove VF
> v3->v4:
> - moved noted to the conformance section details in next patch
> - removed queue notify address query AQ command on Michael's suggestion,
> though it is fine. Instead replaced with extending virtio_pci_notify_cap
> to indicate that legacy queue notifications can be done on the
> notification location.
> - fixed spelling errors.
> - replaced administrative virtqueue to administration virtqueue
> - added queue notification capability register to indicate legacy q
> notification supported
> v2->v3:
> - adddressed Jason and Michael's comment to split single register
> access command to common config and device specific commands.
> - dropped the suggetion to introduce enable/disable command as
> admin command cap bit already covers it.
> v1->v2:
> - addressed comments from Michael
> - added theory of operation
> - grammar corrections
> - removed group fields description from individual commands as
> it is already present in generic section
> - added endianness normative for legacy device registers region
> - renamed the file to drop vf and add legacy prefix
>
> - added overview in commit log
> - renamed subsection to reflect command
> ---
> admin-cmds-legacy-interface.tex | 3 ++-
> conformance.tex | 1 +
> transport-pci-legacy-regs.tex | 42 +++++++++++++++++++++++++++++++++
> transport-pci.tex | 2 ++
> 4 files changed, 47 insertions(+), 1 deletion(-)
> create mode 100644 transport-pci-legacy-regs.tex
>
> diff --git a/admin-cmds-legacy-interface.tex b/admin-cmds-legacy-interface.tex
> index dd01c0a..e67632b 100644
> --- a/admin-cmds-legacy-interface.tex
> +++ b/admin-cmds-legacy-interface.tex
> @@ -187,7 +187,8 @@ \subsubsection{Legacy Interfaces}\label{sec:Basic
> Facilities of a Virtio Device
> by the device.
>
> Refer to the specific transport section for the definition of the
> -\field{data}.
> +\field{data}. For the PCI transport refer to section
> +\ref{sec:Virtio Transport Options / Virtio Over PCI Bus / Legacy Interface:
> Group Member Device Configuration Region Access}.
>
> This command is currently only defined for the SR-IOV group type.
>
> diff --git a/conformance.tex b/conformance.tex
> index dc00e84..b3f2c92 100644
> --- a/conformance.tex
> +++ b/conformance.tex
> @@ -267,6 +267,7 @@ \section{Conformance Targets}\label{sec:Conformance /
> Conformance Targets}
> \item Section \ref{sec:Virtio Transport Options / Virtio Over PCI Bus / PCI
> Device Layout / Legacy Interfaces: A Note on PCI Device Layout}
> \item Section \ref{sec:Virtio Transport Options / Virtio Over PCI Bus /
> PCI-specific Initialization And Device Operation / Device Initialization /
> Virtio Device Configuration Layout Detection / Legacy Interface: A Note on
> Device Layout Detection}
> \item Section \ref{sec:Virtio Transport Options / Virtio Over PCI Bus /
> PCI-specific Initialization And Device Operation / Device Initialization /
> Virtqueue Configuration / Legacy Interface: A Note on Virtqueue Configuration}
> +\item Section \ref{devicenormative:Virtio Transport Options / Virtio Over
> PCI Bus / Legacy Interface: Group Member Device Configuration Region Access}
> \item Section \ref{sec:Virtio Transport Options / Virtio Over MMIO / Legacy
> interface}
> \item Section \ref{sec:Virtio Transport Options / Virtio over channel I/O /
> Device Initialization / Setting the Virtio Revision / Legacy Interfaces: A
> Note on Setting the Virtio Revision}
> \item Section \ref{sec:Virtio Transport Options / Virtio over channel I/O /
> Device Initialization / Configuring a Virtqueue / Legacy Interface: A Note on
> Configuring a Virtqueue}
> diff --git a/transport-pci-legacy-regs.tex b/transport-pci-legacy-regs.tex
> new file mode 100644
> index 0000000..ceea28c
> --- /dev/null
> +++ b/transport-pci-legacy-regs.tex
> @@ -0,0 +1,42 @@
> +\subsection{Legacy Interface: Group member device Configuration Region
> Access}\label{sec:Virtio Transport Options / Virtio Over PCI Bus / Legacy
> Interface: Group Member Device Configuration Region Access}
> +
> +The PCI owner device or the member device or both support driver
> notifications using
> +a notification region defined in \field{struct
> virtio_pci_legacy_notify_region}.
> +
> +In \field{struct virtio_virtio_admin_cmd_legacy_notify_query_entry},
> +\field{region_data} is defined as following:
> +
> +\begin{lstlisting}
> +struct virtio_pci_legacy_notify_region {
> + u8 owner; /* When set to 1, notification region is of the owner
> device */
I propose we rename this to flags:
0x0 - end of list (driver should ignore following values until end of
list)
0x1 - owner
0x2 - member
other values - reserved
and prescribe that driver ignores any reserved values.
basically we are following how the virtio capabilities work.
> + u8 bar; /* BAR of the member or owner device */
> + u8 padding[6];
> + le64 offset; /* Offset within bar. */
> +};
> +\end{lstlisting}
> +
> +The group owner device hardwires VF BAR0 to zero in the SR-IOV Extended
> +capability.
> +
> +The group member device does not use PCI BAR0 in all the Virtio PCI
> capabilities
> +listed in section \ref{sec:Virtio Transport Options / Virtio Over PCI Bus /
> Virtio Structure PCI Capabilities}.
Just drop this last one. How can they use it if there's no VF BAR0?
> +
> +\devicenormative{\subsubsection}{Legacy Interface: Group Member Device
> Legacy Configuration Region Access}{Virtio Transport Options / Virtio Over
> PCI Bus / Legacy Interface: Group Member Device Configuration Region Access}
> +
> +When a PCI SR-IOV group owner device supports
> +VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ,
> +VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE,
> VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_READ,
> +VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_WRITE commands, the group owner device MUST
> +hardwire VF BAR0 to zero in the SR-IOV Extended capability and the group
> memberi
> +device MUST NOT use BAR0 in any of the Virtio Structure PCI Capabilities.
> +
> +The group owner device or the group member device or both MAY support driver
> +notifications region.
> +
> +For the SR-IOV group type, the owner device supporting
> +VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ,
> +VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE,
> VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_READ,
> +VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_WRITE and
> VIRTIO_ADMIN_CMD_LEGACY_NOTIFY_QUERY
> +commands and its member device SHOULD follow the rules for the PCI Device ID,
> +Revision ID and Subsystem Device ID of the non-transitional devices
> documented in
> +section \ref{sec:Virtio Transport Options / Virtio Over PCI Bus / PCI Device
> Discovery}.
> diff --git a/transport-pci.tex b/transport-pci.tex
> index a5c6719..72c78f6 100644
> --- a/transport-pci.tex
> +++ b/transport-pci.tex
> @@ -1212,3 +1212,5 @@ \subsubsection{Driver Handling
> Interrupts}\label{sec:Virtio Transport Options /
> re-examine the configuration space to see what changed.
> \end{itemize}
> \end{itemize}
> +
> +\input{transport-pci-legacy-regs.tex}
> --
> 2.26.2
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
