On Fri, Mar 31, 2023 at 01:58:32AM +0300, Parav Pandit wrote:
> Legacy virtio configuration registers and adjacent
> device configuration registers are located somewhere
> in a memory BAR.
>
> A new capability supplies the location of these registers
> which a driver can use to map I/O access to legacy
> memory mapped registers.
>
> This gives the ability to locate legacy registers in either
> the existing memory BAR or as completely new BAR at BAR 0.
>
> A below example diagram attempts to depicts it in an existing
> memory BAR.
>
> +------------------------------+
> |Transitional |
> |MMR SRIOV VF |
> | |
> ++---------------+ |
> ||dev_id = | |
> ||{0x10f9-0x10ff}| |
> |+---------------+ |
> | |
> ++--------------------+ |
> || PCIe ext cap = 0xB | |
> || cfg_type = 10 | |
> || offset = 0x1000 | |
> || bar = A {0..5}| |
> |+--|-----------------+ |
> | | |
> | | |
> | | +-------------------+ |
> | | | Memory BAR = A | |
> | | | | |
> | +------>+--------------+ | |
> | | |legacy virtio | | |
> | | |+ dev cfg | | |
> | | |registers | | |
> | | +--------------+ | |
> | +-----------------+ | |
> +------------------------------+
>
> Co-developed-by: Satananda Burla <[email protected]>
> Signed-off-by: Parav Pandit <[email protected]>
> ---
> transport-pci.tex | 33 +++++++++++++++++++++++++++++++--
> 1 file changed, 31 insertions(+), 2 deletions(-)
>
> diff --git a/transport-pci.tex b/transport-pci.tex
> index aeda4a1..55a6aa0 100644
> --- a/transport-pci.tex
> +++ b/transport-pci.tex
> @@ -168,6 +168,7 @@ \subsection{Virtio Structure PCI
> Capabilities}\label{sec:Virtio Transport Option
> \item ISR Status
> \item Device-specific configuration (optional)
> \item PCI configuration access
> +\item Legacy memory mapped configuration registers (optional)
> \end{itemize}
>
> Each structure can be mapped by a Base Address register (BAR) belonging to
> @@ -228,6 +229,8 @@ \subsection{Virtio Structure PCI
> Capabilities}\label{sec:Virtio Transport Option
> #define VIRTIO_PCI_CAP_SHARED_MEMORY_CFG 8
> /* Vendor-specific data */
> #define VIRTIO_PCI_CAP_VENDOR_CFG 9
> +/* Legacy configuration registers capability */
> +#define VIRTIO_PCI_CAP_LEGACY_MMR_CFG 10
> \end{lstlisting}
>
> Any other value is reserved for future use.
> @@ -682,6 +685,18 @@ \subsubsection{Common configuration structure
> layout}\label{sec:Virtio Transport
> Configuration Space / Legacy Interface: Device Configuration
> Space}~\nameref{sec:Basic Facilities of a Virtio Device / Device
> Configuration Space / Legacy Interface: Device Configuration Space} for
> workarounds.
>
> +\paragraph{Transitional MMR Interface: A Note on Configuration Registers}
> +\label{sec:Virtio Transport Options / Virtio Over PCI Bus / Virtio Structure
> PCI Capabilities / Common configuration structure layout / Transitional MMR
> Interface: A Note on Configuration Registers}
> +
> +The transitional MMR device MUST present legacy virtio registers
> +consisting of legacy common configuration registers followed by
> +legacy device specific configuration registers described in section
> +\ref{sec:Virtio Transport Options / Virtio Over PCI Bus / Virtio Structure
> PCI Capabilities / Common configuration structure layout / Legacy Interfaces:
> A Note on Configuration Registers}
> +in a memory region PCI BAR.
So considering common legacy registers. How exactly is INT#x
handled? It's required for old guests since they fail over to that
when MSI-X fails for some reason.
> +
> +The transitional MMR device MUST provide the location of the
> +legacy virtio configuration registers using a legacy memory mapped
> +registers capability described in section \ref{sec:Virtio Transport Options
> / Virtio Over PCI Bus / Virtio Structure PCI Capabilities / Transitional MMR
> Interface: Legacy Memory Mapped Configuration Registers Capability}.
>
> \subsubsection{Notification structure layout}\label{sec:Virtio Transport
> Options / Virtio Over PCI Bus / PCI Device Layout / Notification capability}
>
> @@ -956,9 +971,23 @@ \subsubsection{PCI configuration access
> capability}\label{sec:Virtio Transport O
> specified by some other Virtio Structure PCI Capability
> of type other than \field{VIRTIO_PCI_CAP_PCI_CFG}.
>
> +\subsubsection{Transitional MMR Interface: Legacy Memory Mapped
> Configuration Registers Capability}
> +\label{sec:Virtio Transport Options / Virtio Over PCI Bus / Virtio Structure
> PCI Capabilities / Transitional MMR Interface: Legacy Memory Mapped
> Configuration Registers Capability}
> +
> +The optional VIRTIO_PCI_CAP_LEGACY_MMR_CFG capability defines
> +the location of the legacy virtio configuration registers
> +followed by legacy device specific configuration registers in
> +the memory region BAR for the transitional MMR device.
> +
> +The \field{cap.offset} MUST be 4-byte aligned.
> +The \field{cap.offset} SHOULD be 4KBytes aligned and
> +\field{cap.length} SHOULD be 4KBytes.
> +
> +The transitional MMR device MUST present a legacy configuration
> +memory mapped registers capability using \field{virtio_pcie_ext_cap}.
> +
> \subsubsection{Legacy Interface: A Note on Feature Bits}
> -\label{sec:Virtio Transport Options / Virtio Over PCI Bus /
> -Virtio Structure PCI Capabilities / Legacy Interface: A Note on Feature Bits}
> +\label{sec:Virtio Transport Options / Virtio Over PCI Bus / Virtio Structure
> PCI Capabilities / Legacy Interface: A Note on Feature Bits}
>
> Only Feature Bits 0 to 31 are accessible through the
> Legacy Interface. When used through the Legacy Interface,
> --
> 2.26.2
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
