Legacy virtio configuration registers and adjacent
device configuration registers are located somewhere
in a memory BAR.
A new capability supplies the location of these registers
which a driver can use to map I/O access to legacy
memory mapped registers.
This gives the ability to locate legacy registers in either
the existing memory BAR or as completely new BAR at BAR 0.
A below example diagram attempts to depicts it in an existing
memory BAR.
+------------------------------+
|Transitional |
|MMR SRIOV VF |
| |
++---------------+ |
||dev_id = | |
||{0x10f9-0x10ff}| |
|+---------------+ |
| |
++--------------------+ |
|| PCIe ext cap = 0xB | |
|| cfg_type = 10 | |
|| offset = 0x1000 | |
|| bar = A {0..5}| |
|+--|-----------------+ |
| | |
| | |
| | +-------------------+ |
| | | Memory BAR = A | |
| | | | |
| +------>+--------------+ | |
| | |legacy virtio | | |
| | |+ dev cfg | | |
| | |registers | | |
| | +--------------+ | |
| +-----------------+ | |
+------------------------------+
Co-developed-by: Satananda Burla <[email protected]>
Signed-off-by: Parav Pandit <[email protected]>
---
transport-pci.tex | 33 +++++++++++++++++++++++++++++++--
1 file changed, 31 insertions(+), 2 deletions(-)
diff --git a/transport-pci.tex b/transport-pci.tex
index aeda4a1..55a6aa0 100644
--- a/transport-pci.tex
+++ b/transport-pci.tex
@@ -168,6 +168,7 @@ \subsection{Virtio Structure PCI
Capabilities}\label{sec:Virtio Transport Option
\item ISR Status
\item Device-specific configuration (optional)
\item PCI configuration access
+\item Legacy memory mapped configuration registers (optional)
\end{itemize}
Each structure can be mapped by a Base Address register (BAR) belonging to
@@ -228,6 +229,8 @@ \subsection{Virtio Structure PCI
Capabilities}\label{sec:Virtio Transport Option
#define VIRTIO_PCI_CAP_SHARED_MEMORY_CFG 8
/* Vendor-specific data */
#define VIRTIO_PCI_CAP_VENDOR_CFG 9
+/* Legacy configuration registers capability */
+#define VIRTIO_PCI_CAP_LEGACY_MMR_CFG 10
\end{lstlisting}
Any other value is reserved for future use.
@@ -682,6 +685,18 @@ \subsubsection{Common configuration structure
layout}\label{sec:Virtio Transport
Configuration Space / Legacy Interface: Device Configuration
Space}~\nameref{sec:Basic Facilities of a Virtio Device / Device Configuration
Space / Legacy Interface: Device Configuration Space} for workarounds.
+\paragraph{Transitional MMR Interface: A Note on Configuration Registers}
+\label{sec:Virtio Transport Options / Virtio Over PCI Bus / Virtio Structure
PCI Capabilities / Common configuration structure layout / Transitional MMR
Interface: A Note on Configuration Registers}
+
+The transitional MMR device MUST present legacy virtio registers
+consisting of legacy common configuration registers followed by
+legacy device specific configuration registers described in section
+\ref{sec:Virtio Transport Options / Virtio Over PCI Bus / Virtio Structure PCI
Capabilities / Common configuration structure layout / Legacy Interfaces: A
Note on Configuration Registers}
+in a memory region PCI BAR.
+
+The transitional MMR device MUST provide the location of the
+legacy virtio configuration registers using a legacy memory mapped
+registers capability described in section \ref{sec:Virtio Transport Options /
Virtio Over PCI Bus / Virtio Structure PCI Capabilities / Transitional MMR
Interface: Legacy Memory Mapped Configuration Registers Capability}.
\subsubsection{Notification structure layout}\label{sec:Virtio Transport
Options / Virtio Over PCI Bus / PCI Device Layout / Notification capability}
@@ -956,9 +971,23 @@ \subsubsection{PCI configuration access
capability}\label{sec:Virtio Transport O
specified by some other Virtio Structure PCI Capability
of type other than \field{VIRTIO_PCI_CAP_PCI_CFG}.
+\subsubsection{Transitional MMR Interface: Legacy Memory Mapped Configuration
Registers Capability}
+\label{sec:Virtio Transport Options / Virtio Over PCI Bus / Virtio Structure
PCI Capabilities / Transitional MMR Interface: Legacy Memory Mapped
Configuration Registers Capability}
+
+The optional VIRTIO_PCI_CAP_LEGACY_MMR_CFG capability defines
+the location of the legacy virtio configuration registers
+followed by legacy device specific configuration registers in
+the memory region BAR for the transitional MMR device.
+
+The \field{cap.offset} MUST be 4-byte aligned.
+The \field{cap.offset} SHOULD be 4KBytes aligned and
+\field{cap.length} SHOULD be 4KBytes.
+
+The transitional MMR device MUST present a legacy configuration
+memory mapped registers capability using \field{virtio_pcie_ext_cap}.
+
\subsubsection{Legacy Interface: A Note on Feature Bits}
-\label{sec:Virtio Transport Options / Virtio Over PCI Bus /
-Virtio Structure PCI Capabilities / Legacy Interface: A Note on Feature Bits}
+\label{sec:Virtio Transport Options / Virtio Over PCI Bus / Virtio Structure
PCI Capabilities / Legacy Interface: A Note on Feature Bits}
Only Feature Bits 0 to 31 are accessible through the
Legacy Interface. When used through the Legacy Interface,
--
2.26.2
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
