> From: Michael S. Tsirkin <[email protected]>
> Sent: Thursday, March 2, 2023 8:05 AM
> +When \field{status} is VIRTIO_ADMIN_STATUS_OK, \field{status_qialifier}
> +is reserved and set to zero by the device.
> +
s/status_qialifier/status_qualifier
Missed from v10 of Feb.
> +When \field{status} is VIRTIO_ADMIN_STATUS_EINVAL, the following table
> +describes possible \field{status_qialifier} values:
s/status_qialifier/status_qualifier
Can you please add other useful error codes in addition to the EINVAL?
Few that we are needed EAGAIN, ENOMEM, EBUSY, ENODEV.
And with that, VIRTIO_ADMIN_STATUS_Q_INVALID_MEMBER moves under ENODEV error
code.
> +\begin{tabular}{|l|l|l|}
> +\hline
> +Status & Name & Description \\
> +\hline \hline
> +0x00 & VIRTIO_ADMIN_STATUS_Q_INVALID_COMMAND & command
> error: no additional information \\
> +\hline
> +0x01 & VIRTIO_ADMIN_STATUS_Q_INVALID_OPCODE & unsupported or
> invalid \field{opcode} \\
> +\hline
> +0x02 & VIRTIO_ADMIN_STATUS_Q_INVALID_FIELD & unsupported or
> invalid field within \field{command_specific_data} \\
> +\hline
> +0x03 & VIRTIO_ADMIN_STATUS_Q_INVALID_GROUP & unsupported or
> invalid \field{group_type} \\
> +\hline
> +0x04 & VIRTIO_ADMIN_STATUS_Q_INVALID_MEMBER & unsupported or
> invalid \field{group_member_id} \\
> +\hline
> +0x05-0xFFFF & - & reserved for future use \\
> +\hline
> +\end{tabular}
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
