On Mon, Feb 13, 2023 at 05:20:55PM +0800, Zhu, Lingshan wrote:
>
>
> On 2/13/2023 4:12 PM, Michael S. Tsirkin wrote:
> > On Mon, Feb 13, 2023 at 12:49:44AM +0200, Max Gurtovoy wrote:
> > >
> > > On 12/02/2023 22:19, Michael S. Tsirkin wrote:
> > > > On Sun, Feb 12, 2023 at 04:34:09PM +0200, Max Gurtovoy wrote:
> > > > >
> > > > > On 12/02/2023 15:15, Michael S. Tsirkin wrote:
> > > > > > On Sun, Feb 12, 2023 at 02:10:29PM +0200, Max Gurtovoy wrote:
> > > > > > >
> > > > > > > On 09/02/2023 21:58, Michael S. Tsirkin wrote:
> > > > > > > > On Thu, Feb 09, 2023 at 07:47:56PM +0200, Max Gurtovoy wrote:
> > > > > > > > > On 09/02/2023 17:22, David Edmondson wrote:
> > > > > > > > >
> > > > > > > > > On Thursday, 2023-02-09 at 10:13:46 -05, Michael S.
> > > > > > > > > Tsirkin wrote:
> > > > > > > > >
> > > > > > > > > On Thu, Feb 09, 2023 at 03:00:58PM +0000, David
> > > > > > > > > Edmondson wrote:
> > > > > > > > >
> > > > > > > > > On Thursday, 2023-02-09 at 07:13:36 -05,
> > > > > > > > > Michael S. Tsirkin wrote:
> > > > > > > > >
> > > > > > > > > Each device group has a type. For now,
> > > > > > > > > define one initial group:
> > > > > > > > >
> > > > > > > > > SR-IOV type - PCI SR-IOV virtual
> > > > > > > > > functions (VFs) of a given
> > > > > > > > > PCI SR-IOV physical function (PF). This
> > > > > > > > > group may contain one or more
> > > > > > > > > virtio devices.
> > > > > > > > >
> > > > > > > > > The specification says zero or more generally
> > > > > > > > > and nothing to refine that
> > > > > > > > > for SR-IOV groups.
> > > > > > > > >
> > > > > > > > > Well it says:
> > > > > > > > >
> > > > > > > > > (SR-IOV) physical function (PF) device as
> > > > > > > > > the owner and includes
> > > > > > > > > all its SR-IOV virtual functions (VFs) as
> > > > > > > > > members (see
> > > > > > > > > \hyperref[intro:PCIe]{[PCIe]}).
> > > > > > > > >
> > > > > > > > > how can that be zero?
> > > > > > > > >
> > > > > > > > > If I remove all of the VFs of a PF, does the group
> > > > > > > > > implicitly disappear?
> > > > > > > > >
> > > > > > > > > Enable/Disable SR-IOV are dynamic operations controlled by
> > > > > > > > > NumVFs register.
> > > > > > > > Are you sure? Not by VF Enable?
> > > > > > > Right. It's a combination of the VF_Enable and numVfs.
> > > > > > >
> > > > > > > ...
> > > > > > > "The NumVFs field defines the number of VFs that are enabled when
> > > > > > > VF Enable
> > > > > > > is Set in the associated PF."
> > > > > > >
> > > > > > > > > We can mention that a group include all virtual functions
> > > > > > > > > indicated by TotalVFs
> > > > > > > > > RO register.
> > > > > > > > TotalVFs indicates the maximum number of VFs that could be
> > > > > > > > associated with the PF
> > > > > > > > but not all of these exist. If we use this we get into issues of
> > > > > > > > discovering whether VFs can actually be used. I'd rather avoid
> > > > > > > > that.
> > > > > > > >
> > > > > > > >
> > > > > > > > > This group exist as long as the owner PF supports SR-IOV and
> > > > > > > > > has admin
> > > > > > > > > capabilities.
> > > > > > > > SRIOV spec says:
> > > > > > > > NumVFs controls the number of VFs that are visible.
> > > > > > > >
> > > > > > > > And one can not play with NumVFs dynamically:
> > > > > > > >
> > > > > > > > NumVFs may only be written while VF Enable is Clear. If
> > > > > > > > NumVFs is written when VF Enable is
> > > > > > > > Set, the results are undefined.
> > > > > > > >
> > > > > > > > one has to kill all VFs then enable them all again.
> > > > > > > > As long as we are doing that, we can just unload the driver.
> > > > > > > what driver to unload ? Not sure I'm following..
> > > > > > Basically I am saying that if VFs are disabled this destroys all VFs
> > > > > > so it is not
> > > > > > clear that it makes sense to keep some of the configuration
> > > > > > for previous VFs around.
> > > > > >
> > > > > > My idea is to say that reset is required to disable VFs.
> > > > > which reset ?
> > > > >
> > > > > VFs disabled/enabled using VF_enable PCI register.
> > > > > Lets follow that please.
> > > > >
> > > > > Lets define what is happening during VF_enable = 1 and VF_enable = 0.
> > > > >
> > > > > On VF_enable = 0 --> 1 transition the corresponding device_group,
> > > > > that is
> > > > > owned by the PF, grows and contains NumVFs members with initial
> > > > > features and
> > > > > resources.
> > > > >
> > > > > On VF_enable = 1 --> 0 transition the corresponding device_group,
> > > > > that is
> > > > > owned by the PF, shrinks and contains 0 members and all the dynamic
> > > > > resources are back to the owner.
> > > > Maybe, it's a possible approach. As current patch set has no
> > > > resources I feel we can leave this part to a patch on top
> > > > just so that this one can move forward while we have
> > > > a more specific example to work from.
> > > we can differ the resources part but lets add the part that the group
> > > becomes empty/non-empty according to the disable/enable of VF_enable
> > > register as mentioned above.
> > Hmm. Another option is VIRTIO_ADMIN_STATUS_Q_INVALID_GROUP when VF_enable
> > is clear - since this disables the whole group not a specific member.
> > This allows distinguishing between id > NumVFs and VF_enable == 0
> > so it seems like a nicer option to me.
> How to detect whether VF_enable set to 0 or 1, pulling is not a good idea,
> and do we want
> SRIOV cap to notify the admin vq on changes?
>
> Thanks
I don't understand the question.
Who wants to detect this? It's the driver itself setting this bit -
just call some function, there's no reason to involve the spec.
> >
> >
> > > >
> > > >
> > > > > > > > So I would say we should just ask that VF Enable is set
> > > > > > > > before poking at admin vq, and prohibit clearing VF Enable.
> > > > > > > >
> > > > > > > Sending admin commands shouldn't be restricted and should be
> > > > > > > allowed always.
> > > > > > > Device should react to incoming command.
> > > > > > >
> > > > > > > We can say that an SR-IOV group is empty while the VF enable is
> > > > > > > unset and is
> > > > > > > not empty when it's set. The size of the non empty SR-IOV group
> > > > > > > is equal to
> > > > > > > the numVFs and the VF index is equal to the member identifier in
> > > > > > > this group.
> > > > > > > I had this definition in my patches.
> > > > > > >
> > > > > > > Sending admin command to a non existing member will result in an
> > > > > > > ERROR
> > > > > > > VIRTIO_ADMIN_STATUS_Q_INVALID_MEM.
> > > > > >
> > > > > > just an example:
> > > > > > - assign resource X to VF 16
> > > > > > - set NumVFs to 8
> > > > > >
> > > > > > Does VF 16 keep resource X? I note that
> > > > > > resource X can not be taken back because VF 16
> > > > > > is not accessible.
> > > > > all dynamic resources should return to the owner when VF_enable moves
> > > > > 1 -->
> > > > > 0
> > > >
> > > > It's a possible approach but my question would be whether we
> > > > need a transport independent way to do this through VQ.
> > > > And if we do it's annoying to have multiple ways.
> > > We are defining the existence of the SR-IOV group.
> > >
> > > Also, the approach of sending commands to a non-existing member is valid
> > > for
> > > any group type and should return error VIRTIO_ADMIN_STATUS_Q_INVALID_MEM
> > > in
> > > that case.
> > >
> > > why do we need more ways ?
> > Sorry I mean a transport independent way to destroy a group as a whole.
> >
> >
> > > > > >
> > > > > > For sure, all this is solvable but I'd rather just forbid
> > > > > > changes to VF enable for now.
> > > > > how we can forbid it ? setting this register is not related to virtio.
> > > > We can ask driver to write 0 to device reset before changing VF
> > > > enable to 0. The advantage is that this kind of reset by definition
> > > > frees up all resources.
> > > why do we need to reset the device ? It is fully functional and should be
> > > able to run perfectly fine without any need to reset.
> > >
> > > The PF device might have a very big role in the hypervisor, so restricting
> > > it in this way doesn't sounds mandatory.
> > >
> > > Controlling the SR-IOV group using SR-IOV register enable/disable and
> > > NumVFs
> > > used as the number of the group size sounds simple from Spec and
> > > implementation POV.
> > Simple, however
> > - only works for SRIOV
> > - also limited, for example it's impossible to report an error
> >
> > I would rather not decide now until we have a use-case.
> >
> >
> > > >
> > > > > >
> > > > > > > > There's also the concern of VF migration under MRIOV where VFs
> > > > > > > > might
> > > > > > > > not exit. I'm guessing
> > > > > > > > trying to include that right now is overthinking. So maybe
> > > > > > > > this should mention that VF Migration Capable should be clear.
> > > > > > > >
> > > > > > > >
> > > > > > > > I will add all this to the spec.
> > > > > > > >
> > > > > > > >
> > > > > > > > > How about the converse?
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Each device within a group has a unique
> > > > > > > > > identifier. This identifier
> > > > > > > > > is the group member identifier.
> > > > > > > > >
> > > > > > > > > Note: one can argue both ways whether the
> > > > > > > > > new device group handling
> > > > > > > > > functionality (this and following
> > > > > > > > > patches) is closer
> > > > > > > > > to a new device type or a new transport
> > > > > > > > > type.
> > > > > > > > >
> > > > > > > > > However, I expect that we will add more
> > > > > > > > > features in the near future. To
> > > > > > > > > facilitate this as much as possible of
> > > > > > > > > the text is located in the new
> > > > > > > > > admin chapter.
> > > > > > > > >
> > > > > > > > > I did my best to minimize
> > > > > > > > > transport-specific text.
> > > > > > > > >
> > > > > > > > > Signed-off-by: Max Gurtovoy
> > > > > > > > > <[email protected]>
> > > > > > > > > Signed-off-by: Michael S. Tsirkin
> > > > > > > > > <[email protected]>
> > > > > > > > > ---
> > > > > > > > > admin.tex | 49
> > > > > > > > > +++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > > content.tex | 2 ++
> > > > > > > > > 2 files changed, 51 insertions(+)
> > > > > > > > > create mode 100644 admin.tex
> > > > > > > > >
> > > > > > > > > diff --git a/admin.tex b/admin.tex
> > > > > > > > > new file mode 100644
> > > > > > > > > index 0000000..2bc7322
> > > > > > > > > --- /dev/null
> > > > > > > > > +++ b/admin.tex
> > > > > > > > > @@ -0,0 +1,49 @@
> > > > > > > > > +\section{Device groups}\label{sec:Basic
> > > > > > > > > Facilities of a Virtio Device / Device groups}
> > > > > > > > > +
> > > > > > > > > +It is occasionally useful to have a
> > > > > > > > > device control a group of
> > > > > > > > > +other devices. Terminology used in such
> > > > > > > > > cases:
> > > > > > > > > +
> > > > > > > > > +\begin{description}
> > > > > > > > > +\item[Device group]
> > > > > > > > > + or just group, includes zero or
> > > > > > > > > more devices.
> > > > > > > > > +\item[Owner device]
> > > > > > > > > + or owner, the device controlling
> > > > > > > > > the group.
> > > > > > > > > +\item[Member device]
> > > > > > > > > + a device within a group. The
> > > > > > > > > owner device itself is not
> > > > > > > > > + a member of the group.
> > > > > > > > > +\item[Member identifier]
> > > > > > > > > + each member has this identifier,
> > > > > > > > > unique within the group
> > > > > > > > > + and used to address it through
> > > > > > > > > the owner device.
> > > > > > > > > +\item[Group type identifier]
> > > > > > > > > + specifies what kind of member
> > > > > > > > > devices there are in a
> > > > > > > > > + group, how is the member
> > > > > > > > > identifier is interpreted
> > > > > > > > > + and what kind of control the
> > > > > > > > > owner has.
> > > > > > > > > + A given owner can control a
> > > > > > > > > single group of a given type,
> > > > > > > > > + thus the type and the owner
> > > > > > > > > together identify the group.
> > > > > > > > > + \footnote{Even though some group
> > > > > > > > > types only support
> > > > > > > > > + specific
> > > > > > > > > transports, group type identifiers
> > > > > > > > > + are global rather
> > > > > > > > > than transport-specific -
> > > > > > > > > + we don't expect a
> > > > > > > > > flood of new group types.}
> > > > > > > > > +\end{description}
> > > > > > > > > +
> > > > > > > > > +The following group types, and their
> > > > > > > > > identifiers, are currently specified):
> > > > > > > > > +\begin{description}
> > > > > > > > > +\item[SR-IOV group type (0x1)]
> > > > > > > > > +This device group has a PCI Single Root
> > > > > > > > > I/O Virtualization
> > > > > > > > > +(SR-IOV) physical function (PF) device
> > > > > > > > > as the owner and includes
> > > > > > > > > +all its SR-IOV virtual functions (VFs)
> > > > > > > > > as members (see
> > > > > > > > > +\hyperref[intro:PCIe]{[PCIe]}).
> > > > > > > > > +
> > > > > > > > > +The PF device itself is not a member of
> > > > > > > > > the group.
> > > > > > > > > +
> > > > > > > > > +The group type identifier for this group
> > > > > > > > > is 0x1.
> > > > > > > > > +
> > > > > > > > > +A member identifier for this group can
> > > > > > > > > have a value 0x1 to 0xFFFF
> > > > > > > > > +and equals the SR-IOV VF number of the
> > > > > > > > > member device (see
> > > > > > > > > +\hyperref[intro:PCIe]{[PCIe]}).
> > > > > > > > > +
> > > > > > > > > +Both owner and member devices for this
> > > > > > > > > group type use the Virtio
> > > > > > > > > +PCI transport (see \ref{sec:Virtio
> > > > > > > > > Transport Options / Virtio Over PCI Bus}).
> > > > > > > > > +\end{description}
> > > > > > > > > +
> > > > > > > > > +
> > > > > > > > > diff --git a/content.tex b/content.tex
> > > > > > > > > index 0c2d917..ffe45c4 100644
> > > > > > > > > --- a/content.tex
> > > > > > > > > +++ b/content.tex
> > > > > > > > > @@ -491,6 +491,8 @@ \section{Exporting
> > > > > > > > > Objects}\label{sec:Basic Facilities of a Virtio Device / Expo
> > > > > > > > > types. It is RECOMMENDED that devices
> > > > > > > > > generate version 4
> > > > > > > > > UUIDs as specified by
> > > > > > > > > \hyperref[intro:rfc4122]{[RFC4122]}.
> > > > > > > > >
> > > > > > > > > +\input{admin.tex}
> > > > > > > > > +
> > > > > > > > > \chapter{General Initialization And
> > > > > > > > > Device Operation}\label{sec:General Initialization And Device
> > > > > > > > > Operation}
> > > > > > > > >
> > > > > > > > > We start with an overview of device
> > > > > > > > > initialization, then expand on the
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Tell her I'll be waiting, in the usual place.
> > > > > > > > >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: [email protected]
> > For additional commands, e-mail: [email protected]
> >
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
