Hi, I am not aware of the differences and thank's for the information!   I 
don't personally use a case because I keep my phone in my pocket.

I'll have to ask the customer about this -- she has a 4 (not 4s) phone and 
I don't know which case she has.

It was very clear, however, that scanning in the case meant that the flash 
was on all the time.   And when she took it out of the case voila!  no 
flash unless needed.

I'd thought initially on these reports that the case obscured the camera, 
but it is equally important that it not obscure the light detector, a 
surprising finding.  You'd think that a manufacturer of cases that support 
using the camera would consider it important to reveal the light detector. 
  It may be that they do, but that the thickness of the case is such that 
the detector cannot get a true reading....

N

On Friday, June 1, 2012 8:03:02 PM UTC-5, Raul Gallegos wrote:
>
> Hello Nancy. I'm not sure if you are aware, but there are 2 kinds of 
> Defender cases for the iPhone 4. There is the 4 and then there is the 
> specific 4S one. The one specifically for the 4S is backward compatible 
> with the 4 and the only difference is that the camera port is a larger 
> hole, shaped like an oval and this allows for the camera to work better. 
> If a 4-only case is used on a 4S, the camera port on the case is more 
> rounded and too small. 
>
> If you already knew all of this, my apologies. 
>
> -- 
> Raul A. Gallegos 
> A wise old man said to me once, "You should question everything in 
> life."   I said, "Why?" 
> Home Page: http://raulgallegos.com 
> Twitter: https://twitter.com/rau47 
> Facebook: http://facebook.com/rgallegos74 
>
> On 6/1/2012 5:14 PM, Nancy M wrote: 
> > There was some discussion on one of the threads here after our April 
> > release about scanning with Digit-Eyes in a case and having problems. 
> > 
> > Based on some work I did today with one of our customers, we now 
> > understand the issue and it is an interesting one. 
> > 
> > What it turned out was happening is that the case is designed in such a 
> > way that it tends to block the light detector for the phone. As a 
> > result, the flash is on all the time and there is a LOT of reflection 
> > from many scanned surfaces. This was because of the combination of the 
> > ambient light plus the bright light of the flash. 
> > 
> > So it wasn't so much that the case was blocking the camera -- it wasn't 
> > (this was a very good case -- the Otterbox defender). But it WAS 
> > blocking the light detector and that was, indirectly causing the 
> problem. 
> > 
> > We'll be modifying the documentation on our website, but I thought that 
> > those of you who were involved in the original report might find it 
> > interesting to know what the cause of the failure is. 
> > 
> > 
> > -- 
> > You received this message because you are subscribed to the "VIPhone" 
> > Google Group. 
> > To search the VIPhone public archive, visit 
> > http://www.mail-archive.com/[email protected]/. 
> > To post to this group, send email to [email protected]. 
> > To unsubscribe from this group, send email to 
> > [email protected]. 
> > For more options, visit this group at 
> > http://groups.google.com/group/viphone?hl=en. 
>

-- 
You received this message because you are subscribed to the "VIPhone" Google 
Group.
To search the VIPhone public archive, visit 
http://www.mail-archive.com/[email protected]/.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/viphone?hl=en.

Reply via email to