I purchased a cheap £3 USB PCI card to fit into a Supermicro X11SAE-F.
USB card is a Belkin 5 Port USB 2.0 PCI Card 4 Int / 1 Ext Ports from
Scan.co.uk, item number LN46145. It uses an NEC chipset. The
configuration of this card is proving tricky due to a duplicate
assignment of device and vendors IDs as evidenced with lspci -nn.
05:01.0 USB controller [0c03]: NEC Corporation OHCI USB Controller
[1033:0035] (rev 43)
05:01.1 USB controller [0c03]: NEC Corporation OHCI USB Controller
[1033:0035] (rev 43)
05:01.2 USB controller [0c03]: NEC Corporation uPD72010x USB 2.0
Controller [1033:00e0] (rev 04)
1033:0035 specified from 05:01.0 and 05:01.1. If I add all of these to
/etc/modprobe.d/vfio.conf alongside my GPU IDs then QEMU fails to
start the guest complaining it can't attach to 05:01.1. The error is
this:
Error starting domain: internal error: qemu unexpectedly closed the
monitor: 2017-11-16T19:58:16.522974Z qemu-system-x86_64: -chardev
pty,id=charserial0: char device redirected to /dev/pts/1 (label
charserial0)
2017-11-16T19:58:17.917457Z qemu-system-x86_64: -device
vfio-pci,host=05:01.1,id=hostdev3,bus=pci.0,addr=0xc: vfio error:
0000:05:01.1: failed to setup INTx fd: Operation not permitted
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/asyncjob.py", line 89, in cb_wrapper
callback(asyncjob, *args, **kwargs)
File "/usr/share/virt-manager/virtManager/asyncjob.py", line 125, in tmpcb
callback(*args, **kwargs)
File "/usr/share/virt-manager/virtManager/libvirtobject.py", line 82, in newfn
ret = fn(self, *args, **kwargs)
File "/usr/share/virt-manager/virtManager/domain.py", line 1505, in startup
self._backend.create()
File "/usr/lib/python2.7/site-packages/libvirt.py", line 1069, in create
if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self)
libvirtError: internal error: qemu unexpectedly closed the monitor:
2017-11-16T19:58:16.522974Z qemu-system-x86_64: -chardev
pty,id=charserial0: char device redirected to /dev/pts/1 (label
charserial0)
2017-11-16T19:58:17.917457Z qemu-system-x86_64: -device
vfio-pci,host=05:01.1,id=hostdev3,bus=pci.0,addr=0xc: vfio error:
0000:05:01.1: failed to setup INTx fd: Operation not permitted
My host OS is Arch running the linux-vfio kernel for ACS support on an
i7 6700k. vt-d is otherwise working perfectly.
The devices are not being grabbed by vfio-pci as I would hope at boot.
05:01.0 USB controller: NEC Corporation OHCI USB Controller (rev 43)
Subsystem: NEC Corporation USB Controller
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
05:01.1 USB controller: NEC Corporation OHCI USB Controller (rev 43)
Subsystem: NEC Corporation USB Controller
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
05:01.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller (rev 04)
Subsystem: Device 0ee4:3383
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
Following some help I received elsewhere I tried the manual approach
which did successfully bind the devices to vfio-pci but I still ended
up with the guest not starting due to the IRQ conflict below:
[ 93.950195] vfio-pci 0000:05:01.0: enabling device (0000 -> 0002)
[ 94.000193] vfio-pci 0000:05:01.2: enabling device (0000 -> 0002)
[ 94.034477] genirq: Flags mismatch irq 17. 00000000
(vfio-intx(0000:05:01.2)) vs. 00000080 (idma64.1)
Manual bind steps followed:
echo 0000:05:01.0 > /sys/bus/pci/devices/0000:05:01.0/driver/unbind
echo 0000:05:01.1 > /sys/bus/pci/devices/0000:05:01.1/driver/unbind
echo 0000:05:01.2 > /sys/bus/pci/devices/0000:05:01.2/driver/unbind
echo 1033 0035 > /sys/bus/pci/drivers/vfio-pci/new_id
echo 1033 00e0 > /sys/bus/pci/drivers/vfio-pci/new_id
echo 0000:05:01.0 > /sys/bus/pci/drivers/vfio-pci/bind
echo 0000:05:01.1 > /sys/bus/pci/drivers/vfio-pci/bind
echo 0000:05:01.2 > /sys/bus/pci/drivers/vfio-pci/bind
# lspci -k
05:01.0 USB controller: NEC Corporation OHCI USB Controller (rev 43)
Subsystem: NEC Corporation USB Controller
Kernel driver in use: vfio-pci
Kernel modules: ohci_pci
At this point I'm fairly certain the card is garbage and unsalvageable, is it?
_______________________________________________
vfio-users mailing list
vfio-users@redhat.com
https://www.redhat.com/mailman/listinfo/vfio-users
