Hi, might be a stupid note, but your log says its looking on the address, which is according to your iomem on PCI Bus 01:00.0. According to my working VM log, the addr is set to "0x2" and bus to "pci.0". To be specific: -device vfio-pci,host=00:02.0,id=hostdev0,bus=pci.0,addr=0x2 Maybe this helps?
Best regards, Manuel PS: The id is not required. I use it to alter some options on the device. I also set x-igd-opregion=on and x-igd-gms=5, but those shouldn’t be required for a working output. > Hello, > > Still trying to pass the video from my intel hd4600 cpu to a VM with > no > luck. It stops in "Running option rom at c000:0003" > > when I launch the VM vm.log: > > http://pastebin.com/X7sAX2jg > > /proc/iomem after launching the VM > > http://pastebin.com/N389ps0d > > dmesg: > > http://pastebin.com/dj1g0jMi > > VM: > echo 1 > /sys/module/kvm/parameters/ignore_msrs > qemu-system-x86_64 -enable-kvm -M pc,accel=kvm -m 4096 -cpu host \ > -smp 4,sockets=1,cores=4,threads=1 \ > -vga none \ > -display none \ > -device vfio-pci,host=00:02.0,bus=pci.0,addr=02.0 \ > -drive file=/home/mv/winIGD.qcow2,cache=none,if=virtio,format=qcow2 \ > -device vfio-pci,host=0f:00.0 \ > -device vfio-pci,host=10:00.0 \ > -chardev stdio,id=seabios \ > -device isa-debugcon,iobase=0x402,chardev=seabios \ > -netdev user,id=vmnic -device virtio-net,netdev=vmnic \ > > Thanks > > _______________________________________________ > vfio-users mailing list > vfio-users@redhat.com > https://www.redhat.com/mailman/listinfo/vfio-users _______________________________________________ vfio-users mailing list vfio-users@redhat.com https://www.redhat.com/mailman/listinfo/vfio-users
