Hello, On 07/28/2016 10:39 AM, Ryan A Young wrote:
Forgot to add my motherboard. ASRock H97M.
This seems to be a problem with all ASRock boards, at least 9-series. Go into the firmware setup. First, set fast boot to disabled. then set CSM to enabled. Then go into the CSM configuration. You can set boot mode to UEFI only, since I assume you're using UEFI boot on the host already. The important setting is to change the video option ROM to Legacy. The other option ROMs can be set to UEFI or disabled (depending on if you use PXE or chipset RAID). Regards, Samuel _______________________________________________ vfio-users mailing list vfio-users@redhat.com https://www.redhat.com/mailman/listinfo/vfio-users
