Hey Alex, I really appreciate all your help and your quick responses (and everyone else too, thanks!).
I have found a Utility from MSI that will detect if there is an updated version of the my card's firmware, but it won't run on the VM (I assume it's looking for some version bit for Win10_64bit that just isn't set). So I'm left with having to physically remove the GPU from the host, re-install it in my Windows desktop, then run the utility in the hopes that it's got a firmware update (likely, since I don't think I've ever flashed it before), and that that update enables it to function with UEFI. If this doesn't work, I'll look into patching the kernel. I'm already using kernel 4.7 from the rawhide repo so as to enable quirks for ACS for the Skylake processor I'm using. I don't know how to go about patching the kernel so I'll put that off as my last resort if I can't get the OVMF working with this last try. I do have two questions for you though, Alex. Would completely disabling the IGD help in anyway? It's not really necessary in my setup since the host is headless and the IGD just provides a physical terminal if ever SSH becomes unreachable. Also, for the OVMF, I see two UEFI x86_64 modes available when I create a virtual machine: UEFI x86_64: /usr/share/edk2.git/ovmf-x64/OVMF_CODE-pure-efi.fd UEFI x86_64 /usr/share/edk2/ovmf/OVMF_CODE.fd I don't understand why there's two or what the difference is between them. All my tests have been using the first one (pure-efi). Am I likely to see different results if I try with the OVMF_CODE.fd one? Off to play musical PCIe slots. Will post another update later. Steven On Mon, Jul 25, 2016 at 9:11 PM, Alex Williamson <alex.william...@redhat.com > wrote: > On Mon, 25 Jul 2016 20:15:15 -0400 > Steven Bell <stv.bel...@gmail.com> wrote: > > > So I tried a BIOS VM, freshly created from scratch. Reinstalled Windows > 10 > > and was able to get the NIC and USB passthrough working fine. When I > > removed the VNC Graphic device and Video Display, then add the NVIDIA > card > > (graphics and audio) the machine doesn't boot and needs to be forced off. > > Even re-adding the VNC Graphic device and Video Display (so I can see > what > > is going on) fixes it allowing it to boot (even though the GPU devices > are > > still present). I can confirm when it boots normally that my TightVNC > > connection works. But I'm blind when just the NVIDIA devices are present > so > > no clue WHY it's not booting. > > You have IGD for host graphics which lies to the VGA arbiter about > disabling VGA regions, there's an article on my blog about this. Long > story short, you either need to patch your kernel to makes i915 work > with VGA arbitration or you need to disable IGD and use a host graphics > card that works with VGA arbitration. This is why OVMF is the > preferred solution since it doesn't make use of VGA regions but it's > not always easy to find 600 series GeForce cards with UEFI ROMs. I was > able to get one for my EVGA GTX 660, but it didn't come with it > initially. Thanks, > > Alex >
_______________________________________________ vfio-users mailing list vfio-users@redhat.com https://www.redhat.com/mailman/listinfo/vfio-users
