On Sun, 17 Jul 2016 05:32:29 -0500 David <david...@gmail.com> wrote: > OK, installed all these rpms and rebooted. IOMMU is still on, but > sadly the Raid volume still isn't showing up. Rebooted a second time > to be sure. Attaching new error log. > > $ uname -r > 4.6.4-302.aw0.fc24.x86_64 > > # lsblk -f > NAME FSTYPE LABEL > UUID MOUNTPOINT > sda > ├─sda1 vfat efi > 9E87-0ECF /boot/efi > ├─sda2 ext4 boot > 4f8d2664-8fc0-4779-ac18-6f0c06152d27 /boot > └─sda3 crypto_LUKS > ccee7bd2-4dce-4966-addb-bba6194ade93 > └─luks-ccee7bd2-4dce-4966-addb-bba6194ade93 LVM2_member > MePSH6-Fo6u-3mNp-ou31-uU4r-rCVz-5sPM79 > ├─linuslvm1-root crypto_LUKS > 5101eab0-8b88-414f-8ec8-ec8dbe3e6791 > │ └─luks-5101eab0-8b88-414f-8ec8-ec8dbe3e6791 ext4 root > 3f788b0c-9721-4359-9f09-5dbc6a37d8e9 / > └─linuslvm1-swap swap swap > 5e897a06-decb-4001-b60d-baabaa056b70 [SWAP] > sdb > > # lspci -v -s 03:0e.0 > 03:0e.0 RAID bus controller: Adaptec AAC-RAID > Subsystem: Adaptec 3805 > Flags: bus master, stepping, 66MHz, medium devsel, latency 32, IRQ 60 > Memory at fa600000 (64-bit, non-prefetchable) [size=2M] > Expansion ROM at fa800000 [disabled] [size=256K] > Capabilities: [c0] Power Management version 2 > Capabilities: [d0] MSI: Enable- Count=1/2 Maskable- 64bit+ > Capabilities: [e0] PCI-X non-bridge device > Kernel driver in use: aacraid > Kernel modules: aacraid
Please provide 'lspci -nnvs 03:0e.0'. Thanks, Alex _______________________________________________ vfio-users mailing list vfio-users@redhat.com https://www.redhat.com/mailman/listinfo/vfio-users
